Site Search Results

jam aqua alarm su baskını sızıntıalgılama ve alarm . leak dedection Jam Aqua Alarm Flood detection and alarm systems. JAM Aqualarm, which has been producing water leak detection and environmental monitoring systems since 1982, continues to establish new generation systems worldwide. With its long years of knowledge in water detection, JAM offers solutions suitable for projects specific risks. Platinum technology experts will guide you through all processes, from design to implementation, to provide customized solutions to your risks, from Industrial facilities to Plazas. Jam Aqua Alarm Su You Can Access Flood Detection and Alarm Solutions from the Links Below Jam CDBi-485 Flood Detector Jam UDP-24 Flood Detection Detector Jam UDIN-24 Infrared Flood Detection Detector Jam UDOF-24 Flood Channel Detection Detector Jam UDC-24 Flood Detection Detector Module

Automatic alarm and audible light announcement warning solutions to prevent fire doors from being used out of their intended purpose Security Risk Prevention Solutions in Fire Doors Automatic audible and light announcement warning solutions to prevent the misuse of fire doors Preventing and controlling the misuse of fire doors in businesses is one of the biggest problems. If you cannot control, they take serious risks, material and moral losses occur and they experience high losses. Unlocked and unsecured emergency exit doors constitute a complete crossing point for thieves. On the other hand, if you are locks, because you prevent the opening of the door and evacuation in possible emergency situations, you run into serious risks and you may cause loss of life and you may be subject to criminal sanctions due to legal responsibilities. Emergency exit doors should be prevented from being used outside of their intended purpose. Therefore, these doors should be equipped with special door security systems. The solutions for all these problems are in Platinum Technology. In daily life, when the doors are used out of control, the system that allows the user to be warned and monitored on the central system, if any, with the sound announcement and siren recorded on it, enables the use of the doors by authorized users. In a recent study, it was determined that there are warnings in front of all emergency exits and there is no closed door in the control of whether the fire doors of public enterprises are closed for other reasons. "Unnecessary users are punished" and "Doors are alarmed" and "Do not open except in emergencies" warnings are placed on the doors. According to the Fire Regulations, emergency exit doors must be fire-resistant and smoke-proof for at least 90 minutes, self-closing mechanism and permanently closed. In this way, it is ensured that the stairs and halls can be used for evacuation purposes in emergency evacuation and that the fire crews can easily perform their operational work. The pressurization system created to prevent smoke from entering the stairs works efficiently if the doors are closed. ALL THESE SCENARIOS WILL BE NON-FUNCTIONAL IF THE FIRE LADDER DOOR IS OPEN. WE CAN OFFER SOLUTIONS FOR ALL EMERGENCY DOORS WITH OUR WIDE RANGE OF PRODUCTS. to prevent the uncontrolled use of fire doors in your business We offer audible warning and announcement solutions.

Solo 460 ve 461 Isı sıcaklık Dedektörü Test kitleri Solo A10 Smoke Detector Test Aerosol Global detector manufacturer approved No wires, trailing wires or hanging wires Battery powered (Kits include 1 or 2 higher capacity (3000 mAh) Battery Poles and UL listed fast charger with mains and in-vehicle power cords) Suitable for constant temperature, rate of rise and combination detectors up to 194°F / 90°C Lightweight and simple to use Universal design fits the widest range of detectors Transparent test cup for clear view of the detector LED Designed for use at heights, angles or low All fire detection systems approved by smoke detector manufacturers Solo A10 is preferred by professionals for fire detector testing, thanks to its structure similar to real fire smoke.

Endüstriyel tesis ihtiyaç ve risklerine özel zayıf akım sistemleri . güvenlik çözümleri Factories ; Thermal Power Plants; Oil Refineries; Gas Plants; Petrochemical Plants; Cement Factories; Hydroelectric Facilities; Iron and Steel Plants; Glass Factories; Power Plants; Landfill Gas Plants; Electronics factories; Rolling mills; Automobile Factories; Textile production facilities; Wood and chipboard manufacturing facilities; Waste recycling facilities; Paper and printing facilities; Plastic manufacturing complexes; Packaging manufacturing facilities; We offer electronic security, weak current solutions specific to various facilities such as. Our area of expertise is electronic solutions for fire, safety and OHS risks in industrial facilities. FIRE DETECTION AND WARNING SYSTEM; Controlling all points of the facility against the risk of fire.It provides instant detection of the first formation of the fire in the form of particles and allows the fire to be intervened before it grows. For this purpose, the fire alarm systems installed by Platin Teknoloji primarily prevent the personnel in the environment from being in life-threatening danger and the building from material damages. There is a fire control panel in the system. It evaluates the warnings coming from various type detection elements suitable for the needs of your business and activates the sirens, flashers, telephone dialer. It transmits detailed information to the call center and the security point. During all these events, from the moment of fire detection, to the elevator, ventilation system, pressurization fans, Smoke evacuation system. It is ensured that previously prepared alarm scenarios are activated by sending information to systems such as, turnstiles etc. CLOSED CIRCUIT CAMERA SYSTEMS; Camera systems used to minimize security and operational risks specific to your facility needs produce indispensable solutions for business security.We offer i camera solutions and DVR recording device and command control center solutions suitable for all kinds of business and manufacturing conditions. Our products do not only register. It produces alarm scenario solutions in order to prevent the occurrence of events, problems and risks by performing event analysis. DETECTION OF FLAMMABLE, EXPLOSIVE AND TOXIC CHEMICALS AND GASES; Gases, chemicals used in various processes in industrial facilities, gases emerging during manufacturing or condensation of gases emerging in storage areas pose a risk in terms of worker health and workplace safety. Platinum technology engineers offer customized solutions for your business to identify these risks caused by industrial gases and to evacuate them before the risk grows. FIRE DETECTION WITH VERY SENSITIVE AIR SAMPLING AND ANALYSIS SYSTEMS; The system ensures that the sensitive laser sensor, which continuously samples air from the environment, allows the quality of the air passing through the sampling room to be monitored and the fire to be detected at the moment of occurrence. LASER TYPE FIRE DETECTION AND SMOKE DETECTION EQUIPMENT; Laser beam detectors are used where high ceiling point type fire detection systems do not work efficiently, operating and installation costs will minimize economic and fire risks. The system ensures that the fire is detected at the time of its first occurrence by mutually controlling the beam of light it generates. ELECTRIC PANELS AUTOMATIC FIRE EXTINGUISHING; Cabin-type extinguishing systems that provide low initial investment and operating costs and high performance are used for electrical panels and cabinets where risks are concentrated. It provides effective extinguishing with HFC227ea and HFC125 etc. extinguishing gases used in fire extinguishers. They are odorless, colorless, non-residual gases that do not harm electrical material. WATER MOISTURE DETECTION AND ALARM SYSTEMS; These are the solutions that will prevent damage to the facility as a result of leakage and humidity that will occur outside the control of the water used by the process, detect possible floods, warn the relevant parties and activate the water evacuation engine, heating system, ventilation system in accordance with the prepared scenario. AUTOMATIC FIRE EXTINGUISHING SYSTEMS; Process-specific risks that will cause significant damage to the business and solutions that will extinguish electrical fires in a very short time are offered. Automatic extinguishing systems that will prevent damage to the business and manufacturing processes. The relevant extinguishing gas / chemical is selected and designed, taking into account the special situation of the establishment and the area where it will be established. The system user will make independent fire detection and initiate the extinguishing process. CABLE TRAYS, VENTILATION SYSTEMS FIRE DETECTION AND DETECTION SYSTEMS; With a special sensor cable to be installed in high risk and difficult to detect areas such as electrical installations and ventilation ducts, it is possible to detect sudden temperature changes at the points where it is located.Linear Heat Detection is a versatile and economical fire detection product. Considering the initial investment, maintenance, operating costs and operating performance, .Extrem offers economical and performance solutions for fire detection needs. ACCESS CONTROL SYSTEMS; We offer solutions for the employees to act in a controlled and safe manner and to control and report the entrance to the designated areas. The doors of risky rooms are controlled with the access control system due to the determined business, security, hygiene and occupational safety needs. We offer solutions such as personnel card, fingerprint, eye recognition, etc. at the entrances to these rooms. Access control application covers all determined areas starting from the first entry point of the enterprise. It is possible to report all movements and to make the necessary controls online. TURNSTILE AND BARRIER SOLUTIONS; Enterprise and process entrances are arranged and limited with turnstiles used in integration with the access control system in all areas where the human traffic in the enterprise must be controlled. Thus, it is used for the purpose of controlling the passages at the points and places where the transition should be made within the order determined by the factory. All of our tourniquet types are microprocessor-based and allow only one person to pass at a time. Turnstiles have automatic falling arm feature and illuminated and audible indicators. INTELLIGENT CAMERA SOFTWARE; It is not possible to interpret and monitor the needs of industrial facilities, such as environmental security, occupational safety, etc., with existing cameras and observations of operators. Due to all these needs, image - event analysis software has been developed to interpret the images taken from Platin Technology cameras and enable the operation of previously determined factory-specific scenarios. In the Image - Event Analysis software algorithms, images are viewed simultaneously and live, and the software also interprets events and runs scenarios. The software works 24/7 365 days in all environmental conditions. It does not need additional manpower and equipment. SYSTEM ROOM TRACKING AND REPORTING SOLUTIONS; It has been developed so that important technical rooms can operate without risk. It monitors the criteria such as heat, humidity, fire, smoke, network-ups voltages, unauthorized entry etc. of special rooms such as system rooms and ensures that the relevant persons are warned and reported without a possible detection. In addition to the ability to monitor system parameters, it provides integration with other systems in case of an event. In cases of sudden temperature increases and decreases, ups and network voltages, water and humidity raids, unauthorized entry, etc., the system room provides a warning in the form of e-mail or SMS. In this way, the alarm & technical malfunction that caused the error is detected as soon as possible and effective and fast measures are taken. FIRE DETECTION AND ALARM SYSTEM TEST EQUIPMENTS; Testing and regular maintenance of fire detection system equipment established by making serious investments in enterprises are among the needs that are ignored in our country. Platin Technology has offered suitable test gases, cleaning and control apparatus for all detector types such as smoke, heat, gas and carbon monoxide, which make up the fire detection system, to the use of professional operating and fire system maintenance companies. EMERGENCY ROUTING LUMINAIRES; In the event of a power outage in the industrial facilities, such as a fire, earthquake, the electrical energy of the building or building for safety reasons, the users of the automatic switch-on and evacuation in case of failure of normal lighting due to the opening of a circuit breaker or a fuse directing devices and systems. EMERGENCY ANNOUNCEMENT AND SOUNDING SYSTEM; Emergency announcement and public address systems in industrial facilities are the solutions used for the rapid evacuation and guidance of the employees in the buildings and safely in emergency situations. KEY MANAGEMENT SYSTEMS; Key management solutions that enable all areas and vehicles belonging to the business to easily access the keys when necessary and report key usage, preventing and securely protecting the keys. SECURITY AUTOMATION SOLUTIONS; It installs security automation systems against theft and sabotage in medium and small type projects. These systems, which are needed today, are the definitive solution to robberies and unauthorized access. These systems are less likely to have false alarms and only allow the system to intervene with the correct password. In security systems, there are products and systems with different detection features according to the purpose and protection system. Electronic systems are integrated with an alarm, instant scenarios are activated and necessary precautionary warnings are activated, where the security risks of large-scale areas such as Shopping centers, Plaza, Headquarters, Factory, Campus, etc. are minimized. are systems DISABLED LIFE SOLUTIONS; These are electronic solutions offered for disabled visitors and employees to meet their daily needs risk-free and comfortably within your business and to minimize possible risks. What are the risks? We offer solutions for the need for help and urgent struggle in wet areas, the need for medical assistance in general areas, and the risks of reaching exits without assistance in emergency evacuation processes. It offers weak current solutions that will minimize the risks of industrial areas. Please contact us for special solutions for your projects in Turkey and all countries in our service area.

Solo 811 Duman Dedektörü Test kiti Solo A10 Smoke Detector Test Aerosol All fire detection systems approved by smoke detector manufacturers Solo A10 is preferred by professionals for fire detector testing, thanks to its structure similar to real fire smoke.

insan sayma sistemleri ile ziyaretçi ve müşterileriniz analiz edin . Kaç kişi geldi ? kamera üzerinden otomatik sayma People Counting Systems Has there been fewer visitors, or has there been a decrease in the number of customers with no noticeable change in the number of visitors? Here is the answer to this critical question, Financial metrics alone cannot really help retailers measure store performance. You can observe that sales have dropped compared to the previous month or Year, but are you using data that helps you comment on why it went down? Did the store have fewer visitors, or did the number of customers decrease with no noticeable change in the number of visitors? The answer to this critical question is the most important factor that enables retailers to effectively analyze their sales figures, evaluate opportunities and ultimately increase their sales figures. By measuring the human traffic entering and leaving your store with the people counting software via Platin Technology Camera, - Analyze your store performances !! - How useful is advertising work? - How accurate are the store opening hours? - Is staff distribution optimized? - What is the Conversion Rate of the store? Allows you to find answers to your questions !! Unfortunately, the most basic metric of the retail industry is either not used at all or used incorrectly. If the managers do not monitor and analyze the store traffic, how do they manage their stores? Hundreds of people visit a store every day. While some of these visitors successfully become customers, hundreds of them leave the store without shopping. The ratio of the number of visitors converting to customers to the total number of visitors gives the conversion rate for a store. This ratio is the most basic metric of the retail industry. CONVERSION RATE = NUMBER OF CUSTOMERS THE NUMBER OF VISITORS INTERFERENCE - IMPACT FACTOR You can observe the effects of store and window designs, visual marketing and innovations, promotions, campaigns and discounts on the number of visitors. ADVERTISING EXPENSES OPTIMIZATION: While advertising and store organization are used to attract and influence customers, measuring human traffic is also used to measure how these organizations are delivering. Normally it is a success for a company to increase its sales by 7%, but there is one more point to be analyzed. If the traffic of this store has increased by 30%, it is observed that the sales potential of the store is fully utilized. By measuring human traffic, you find a relationship based on concrete data between sales and number of visitors, and accordingly, you optimize your advertising and promotion expenses. PERFORMANCE COMPARISON: A detailed analysis of human traffic allows you to compare store and non-store variables in different locations. It allows you to get comprehensive information about your staff at each store. In this way, you can easily compare the store performances with each other and make more fair and conscious evaluations about the personnel. For example, if there is a decrease in the sales figures of a store and the conversion rate is stable, it means that the reason for the decrease in sales figures is out of store factors rather than personnel performance.

ffe fireray beam dedektör ile etkin ışın tipi yangın duman algılama Fireray Beam Type Beam Detector FFE has designed and manufactured fire detection solutions for over 40 years in Fireray UK. Our Talentum®, Fireray®, Aviation Fire Extinguishers and Vibration Switches are trusted by plumbers, distributors and organizations to protect the world's most valuable, prestigious and strategic areas and assets. FFE started its life as Fire Extinguishing Enterprises in 1974. After building a solid business in fire detection in aviation, our product range covers the design, manufacture and supply of vibration switches to protect rotary plant and reciprocating machinery. Our commitment to fire detection and prevention has led to the development of the world's most reliable smoke detection beam; Fireray®. With more than half a million units installed worldwide, Fireray® has become the preferred choice of the world's leading smoke detection distributors and installers. With more than half a million units installed worldwide, Fireray® is the first choice for installers and engineers seeking Optical Beam Smoke Detection over large areas. Preferred by architects thanks to its compact design and the installers and engineers who value the opportunity to speak directly to designers in our UK headquarters; Fireray® relies on protecting the world's most iconic and historic buildings. You can get support from platinum technology experts for Fireray solutions throughout Turkey. Fireray® Fast Real Fire Detection Beam detector can be used as a smoke detection solution in difficult areas Easy to install: From the alarm panel low cost thanks to the 2-wire cable system to the detector It is suitable for historical / protected buildings where aesthetics have an important place. It is suitable for hazardous areas, high concentration areas and high ceiling buildings. Fireray® beam detector usage areas Airports Mosques Conference and Exhibition Centers Distillery Generators Hangers Historical buildings Hospitals Hotels and Casinos Production Facilities Schools Shopping malls Sports and Entertainment Centers Storage Turbine Rooms Warehouses Optical Beam Smoke Detector works on the light block principle. The light sensitive element of the Optical Beam Smoke Detector sees the light generated by the Emitter in a normal state. The receiver is set to a preset sensitivity level based on the percentage of total blocking. There are two types of Optical Beam Smoke Detectors, Projected and Projected. The type used is determined by the installation and ambient conditions and restrictions. Laser-type beam Smoke Detectors Transmitter (T) and Receiver (R) are installed up to 100 meters at each end of the area to be protected. The receiver is electrically connected to a Control Unit, the second is mounted at ground level. As the reflected reflections travel back to the Transmitter, the Projected Optical Beam Smoke Detectors are less sensitive to stray reflection. As a result, Reflected Optical Beam Smoke Detectors can operate within the narrower gaps left in the working environment. In addition, the Projected Optical Beam Smoke Detector Transmitter and Receiver units are generally compact and easily adapted to “aesthetic” architectural designs. See our related products below. Fireray 3000Fireray 3000 EExdReflective Beam Smoke Detectors Transmitter (T) and Receiver (R) are contained in one unit: Transceiver (TR). The transmitted infrared light beam is reflected back by a reflector (prism) mounted directly opposite this unit up to 100 meters. The Receiver connects to a Control Unit, which can be integrated into the Transceiver or mounted at ground level. The Reflected Optical Beam Smoke Detectors use less wiring for lower installation costs (power and wiring are only required at the Transceiver end) and only at the Transceiver end. requires alignment. However, the Reflected Optical Beam Smoke Detector can be vulnerable to reflective elements close to the IR beam path. As the reflector has a wide acceptance angle, it does not need to be accurately aligned as both ends of the Reflected Optical Beam Smoke Detector Fireray 5000Fireray 50R / 100R Our products protect people and property around the world from the risk of fire, it is a responsibility we take very seriously. FFE Ltd recognizes the importance of system integrity and recommends replacing routine detectors 10 years later. Talentum® became part of the FFE family in 2013. Developed in response to the challenges faced by mill owners, where conventional smoke detectors can trigger false alarms, Talentum® is the fastest flame detector in the world. As for the future; We are committed to maintaining excellence and innovation. Every year, we organize regular “trainings” to make sure we are the leader in fire and smoke detection to invest 8% of our future in product R&D and to ensure that our business practices are innovative in line with our products.

sadece gören kayıt eden kamera değil . analiz yaparak olayları anında tespit eden yazılım çözümleri Image and Event Analysis Software Due to the increase in the need for camera systems and the large volumes of the spaces used, it is necessary to use large numbers of cameras in projects. It will not always be possible to view the cameras with the human eye and to interpret the images. Due to these needs, we provide solutions with image-event analysis software that interpret the images and enable the previously determined scenarios to work. In the Image - Event Analysis software algorithms, images are viewed simultaneously and live, and the software also interprets events and runs scenarios. The software works 24/7 365 days in all environmental conditions. It does not need additional human power and concentration. Usage Areas of Image Analysis Software: Transportation and Logistics Areas: Monitoring potential threats and monitoring of vehicle and vehicle traffic inside and outside the facility, uncontrolled entry to risky areas, roaming inside the building, incoming attacks by overcoming barriers inside the building, uncontrolled objects, rule direction and environmental violations by monitoring security measures and Helps reduce on-site accidents. Urban Light Rail Networks: Thanks to advanced analytical modules such as social events, suspicious movements, uncontrolled objects, preventing access to uncontrolled forbidden areas at stations used extensively by all such risky society, it will help to operate safely and provide better protection to public service organizations. Especially those who prefer such places will reduce and control the vandalism incidents. Safe City Surveillance: Detection of traffic obstructing movements, direction violations, lane violations, rule violations, sudden crowds and chaos, suspicious vehicles, helps you to identify unattended objects faster. Campus Environments: Making the circulation inside the campus more secure helps you identify possible threats, sudden crowds and chaos, suspicious vehicles, and identify unattended objects faster. Energy and Utilities: Monitoring potential threats and tracking vehicle and vehicle traffic inside and outside the facility, Uncontrolled entry to risky areas, Circumventing inside the building, Incoming attacks by overcoming the barriers inside the building, uncontrolled objects, rule direction and environmental violations by monitoring security measures and facility Helps reduce internal accidents and emergency management. Retail industry: It helps to observe traffic in areas where high-value products are sold, to monitor products, to monitor violations in sensitive areas and to detect forgotten bags, etc., obstacles to occur in case of fire and emergency exits. Finance: The software prepared to manage security in the finance branch completely automates the cameras. Risk zone breach, Confusion, Threat, Bag forget-drop etc. risks are minimized. Events with Detection Reverse direction: The vehicle going in the opposite direction, the pedestrian jumping on the road can be easily detected through the software. Confusion, Chaos Intensity Detection: It is used to detect sudden density, chaos, chaos, etc. events in any area at railway stations, bus stations, airports, exhibition and fairgrounds, concert event areas, shopping malls, ticket sales points. It will be possible to prevent an undesirable situation with the determination and measures to be taken in time. Intrusion Detection: Although similar to the motion detection feature, this feature can be used to detect the use of unauthorized areas. This feature is in a structure that can be used easily for the safety of corridors, fire evacuation routes and technical spaces that are not normally used. This feature can be used in escalators for direction violations at entry points. Suspect Bag and Vehicle Tracking: This feature, which is used to generate an alarm when an object (such as a suitcase at an airport or train station) is abandoned in a busy corridor, is an important feature in the timely detection and management of dangerous situations. This functionality can also be used to detect suspicious incorrect parking or to detect if people or vehicles in certain areas stay for too long. On-camera analysis software is produced for hundreds of different scenarios according to the needs of the institutions. You can get support from Platin Technology experts for solutions specific to your project.

Inventor of the Talentum flame detector Inventor of the Talentum Flame Detector The Talentum® story began by the father of inventor Andrew Broadbent; A textile supervisor felt that the local fire service had become a fixture in his workplace. Traditional smoke detectors could not cope with the dusty mill environment, resulting in frequent false alarms. This posed a real risk of distracting the fire department from emergencies or creating a “cry wolf” scenario where the alarm would not be taken seriously. Andrew knew that the first evidence of a fire in a textile warehouse was not smoke, but sparks, and thus he would develop the world's first rearview infrared device for flame detection. Being able to detect a jitter in 27 milliseconds, it also becomes the fastest in the world. Such a fast detection and such a respected Talentum® solution, Project BLOODHOUND setting a new land speed record of 1000mph chose Talentum® as the flame detection device. . Like the BLOODHOUND Project team, we are assertive and do not believe we are standing still. Talentum® is constantly evolving and new features such as the Test Air Purification kit for exceptionally high dust environments are already planned. With Talentum®, you are one step ahead at risk and your sites and assets are kept safe. You can get support from platinum technology experts for Talentum flame detector solutions in Turkey. Features Can be used for indoor and outdoor areas Flame-proof, explosion-proof and high ambient temperature options Internal self-testing capability giving highest immunity to spurious flame sources Detects invisible flames from fuels such as hydrogen and other inorganic fuels. Immunity to the effects of wind, drafts and sunlight Where Does Talentum® Do? Talentum® is perfect for environments and industries where steam, smoke and dust are common. Agriculture Automotive Airplane Hangers Aviation Repair Mattress Fillers Biomass Storage and Processing Chemical plants Coal Handling and Milling Compressor Stations Dryers Dust Collection and Filtering Engine Rooms Felt manufacturing Fuel Loading Racks Generators High Voltage Equipment LNG / LPG Production Military and Marine Nuclear and Non-Nuclear Power Plants petrochemical Pharmaceutical Production Printing Refineries Spray Booths Storage tanks Tunnels Waste Recycling Woodworking An optical flame detector detects the heat and light generated by a flame. Using infrared (IR) sensing technology, flames can be detected through elements such as dust, steam and smoke; They are also immune to wind or draft influences. With the addition of an ultraviolet (UV) sensor, a flame detector becomes highly immune to false signals such as sunlight. Optical sensors inside the detector receive IR and / or UV radiation emitted by flames. The processor inside the detector analyzes the optical sensor signal waveforms and determines whether they represent flames and if so accepts them. If the signals do not match the internal algorithms for flames, they are considered to be false sources and rejected. Talentum® Dual IR Talentum® Triple IR Talentum® UV / Dual IR Product Lifetime Our products protect people and property around the world from the risk of fire, it is a responsibility we take very seriously. Talentum recommends replacing routine detectors after 10 years. Hochiki ESP İnteligent Adresli Yangın Algılama Sistemi Temel Avantajları ESP İnteligent Adresli Yangın Algılama Sistemi Öne Çıkanlar Hochiki, adresli fotoelektrik duman dedektörü , yangın alarmı kontrol paneli ile korunan alanlarda bulunan yangın algılama ekipmanı arasında neredeyse hatasız iletişim sağlayan yüksek bütünlüklü bir iletişim platformu olan ESP (Gelişmiş Sistemler Protokolü) tarafından kontrol edilir. Hochiki Adresli Dedektörler : ESP serisi, aşağıdakiler de dahil olmak üzere çeşitli akıllı ürünleri barındırır; yüksek performanslı sensörler, esnek giriş ve çıkış modülleri ve çeşitli yardımcılar. Kısa bir süre önce genişletilen ürün yelpazesi, artık 24 çalışma modu ve 10 yıllık bir CO hücre ömrü ile son derece gelişmiş bir CO çoklu sensörüne de sahiptir. ESP cihazları en zorlu ortamlar için bile uygundur ve çoğu durumda denizcilik onaylı, SIL onaylı veya SCI varyantı sunabiliriz. Ayrıca ESP bölge monitörleri, ESP adreslenebilir sistemleri Hochiki'nin geleneksel CDX serisiyle arabirim oluşturmak için kullanılabilir. Serinin en başında ALN-EN Fotoelektrik Duman Sensörü gelir. Hochiki'nin yüksek performanslı, düz tepki odası teknolojisini kullanarak, üstün bir yangın algılama kabiliyetini korurken yüksek düzeyde yanlış alarm bağışıklığı sağlar. EN54 standartlarının tüm gerekliliklerini aşar ve hiçbir rakibin teknolojisi ile rakipsizdir. Risk faktörlerinin değiştiği uygulamalar için Çoklu Sensör, yanlış alarmlara karşı gelişmiş bir bağışıklık ile optimum algılama sağlamak için kombinasyon halinde veya ayrı ayrı kullanılabilen hem bir fotoelektrik duman sensörü hem de bir ısı sensörü içerir. Çoklu ısı sensörleri, yangın kararına ulaşmada hem sabit sıcaklık hem de artış hızı ısı elemanlarını birleştirir. Hochiki Modülleri Kapsamlı bir Giriş ve Çıkış arabirimi yelpazesi, mevcut bir konvansiyonel bölgenin bağlanmasından duman damperlerinin kapatılmasına, yangın kapılarının kapatılmasına ve asansör kullanımının önlenmesine kadar tüm normal entegrasyon gereksinimlerini kapsar. Ayrıca cihaz döngüsünden 24 V elde edilecek ve ek ekipmana güç verilmesi için hüküm bulunmaktadır. Hochiki modüllerde birden fazla Giriş / Çıkış işlevi vardır. Ancak, yalnızca tek bir döngü adresi alırlar. Bu, istenen neden-sonuç gereksinimlerini elde etmek için gereken toplam fiziksel cihaz sayısını en aza indirerek çok uygun maliyetli bir sistem çözümü sağlar. Çoğu arabirim, kurulumu basitleştirmek için döngüden güç alır. Döngü beslemeli sirenler ve flaşörler ayrıca kurulum maliyetlerinin düşürülmesi yoluyla önemli ölçüde tasarruf sağlayabilir. Bu cihazlar son derece düşük seviyelerde elektrik akımı tüketir ve döngünün kapasitesini en üst düzeye çıkarır. Hochiki Sirenler Döngü beslemeli sirenler ve flaşörler ayrıca kurulum maliyetlerinin düşürülmesi yoluyla önemli ölçüde tasarruf sağlayabilir. Bu cihazlar son derece düşük seviyelerde elektrik akımı tüketir ve döngünün kapasitesini en üst düzeye çıkarır. EN54-23 uyumlu görsel alarm cihazları mevcuttur, üçüncü taraflarca onaylanmıştır ve en üst düzeyde esneklik sağlamak için standardın taleplerini aşacak şekilde tasarlanmıştır. Hochiki Paneller Yangın algılama sistemi ihtiyaçları ve işletmenin büyüklüğü ne olursa olsun modüler ve genişleyebilir yapısı ile hochiki adresli yangın algılama panelleri etkin ve doğru yangın algılama çözümü sunmaktadır.

We offer electronic solutions for worker health and safety ELECTRONIC SOLUTIONS FOR WORKER HEALTH AND SAFETY With the expertise of the World's Leading Brands Platinum Technology, We Offer Solutions in Projects throughout Turkey. You can use the SEARCH menu to quickly reach the product you are looking for. Flammable, Explosive Gas Detection Gases used in industry or generated during manufacturing or gases generated in storage areas that are concentrated above the risk limits pose a risk in terms of worker health and workplace safety. You can get support from Platin Technology experts for detailed information and solution. More information Toxic Chemical Detection and Alarm Toxic chemicals that are used in industrial areas due to the process or that arise with the process pose a risk. All substances that cause serious damage and death to living creatures and harm human health when inhaled, exposed or contacted are defined as "Toxic Gas". You can get support from Platin Technology experts for detailed information and solution. More information Industrial Fire Detection Platin Technology specialists offer solutions for the detection and early detection of fire in industrial facilities, with detailed analysis of the structure of the enterprise, and detecting equipment with the lowest error rate. More information Panic Button Emergency Assistance System Panic alarm, emergency medical response button and communication systems are installed in industrial facilities to quickly transmit information to security and health units in possible emergencies. Established panic alarm buttons are implemented in accordance with the existing infrastructure without requiring any modifications. More information Emergency Meeting Area Disaster Reporting In the emergency action plans included in the occupational health and safety practices, the need for the rapid evacuation of the building in accidents or disasters and the safe gathering of evacuated people in the gathering areas and accessing the information of the insiders has emerged. For detailed information, you can get support from Platin Technology experts. More information Audible and Illuminated Work Safety Warnings In industrial facilities and workforce-weighted enterprises, we offer solutions that support occupational safety that will warn the personnel when they enter the potential risky or instantaneously risky area with sound and light. More information Security Risk Prevention Solutions in Fire Doors Preventing and controlling the misuse of Fire and Emergency doors in businesses is one of the biggest problems. If you cannot control, they take serious risks, material and moral losses occur and they experience high losses. Unlocked and unsecured emergency exit doors constitute a complete crossing point for thieves. You can get support from Platin Technology experts for detailed information and solution. More information Audible and Illuminated Work Safety Warnings In industrial facilities and workforce-weighted enterprises, we offer solutions that support occupational safety that will warn the personnel when they enter the potential risky or instantaneously risky area with sound and light. More information İşçi Sağlığı Ve Güvenliği: Ürünler

we offer schools electronic security solutions specific to fire and security risks Special Solutions for Schools and Educational Institutions Our experts offer special solutions for schools, private teaching institutions, Education Campuses, Universities, Education and simulation areas, Day-Night nursing homes, Kindergartens, Kindergartens, etc. to minimize the security and operational risks specific to educational institutions. FIRE DETECTION AND WARNING SYSTEM: Controlling the fire risk with the fire detection system to be installed in all areas belonging to schools.It provides instant detection of the first occurrence of the fire in the form of particles and allows the fire to be intervened before it grows. For this purpose, the fire alarm systems installed by Platin Teknoloji prevent the life-threatening of the personnel in the environment and material damage to the building. The system includes a fire control panel. It evaluates the warnings coming from various type detection elements suitable for the needs of your business and activates the sirens, flashers, telephone dialer. It delivers detailed information to the relevant manager and security personnel. While all these events are taking place, it is ensured that the alarm scenarios previously prepared are activated by sending information to other systems from the moment the fire is detected. CLOSED CIRCUIT CAMERA SYSTEMS: Camera systems, which are used to minimize private security and operational risks in accordance with the special needs of the education sector, produce indispensable solutions for business security. We offer i camera solutions and DVR recording device and command control center solutions suitable for all kinds of business and manufacturing conditions. Our products do not only register. It produces alarm scenario solutions in order to prevent the occurrence of events, problems and risks by performing event analysis. All systems record in the structure and quality determined by the institution and provide access to images of appropriate quality when necessary. KEY MANAGEMENT SYSTEMS: It is ensured that the keys of the private areas of the school are securely stored and the keys can be easily accessed when necessary, and key management solutions are prevented and securely protected with key management solutions. ELECTRIC PANELS AUTOMATIC FIRE EXTINGUISHING: Cabin-type extinguishing systems that provide low initial investment and operating costs and high performance are used for electrical panels and cabins where risks are concentrated in educational institutions. It provides effective extinguishing with FM 200 and equivalent HFC227ea and HFC125 etc. extinguishing gases used in fire extinguishers. They are odorless, colorless, non-residual gases that do not harm electrical devices. WATER MOISTURE DETECTION AND ALARM SYSTEMS: Features are solutions that will prevent damage to the facility as a result of leakage and humidity that may arise out of control from mechanical areas, detect possible raids, warn the relevant parties and activate the water discharge engine, heating system, ventilation system in accordance with the scenario prepared. CABLE TRAYS, VENTILATION SYSTEMS FIRE DETECTION AND DETECTION SYSTEMS: With a special sensor cable to be installed in high risk and difficult to detect areas such as electrical installations and ventilation ducts, sudden temperature changes are detected at the points where it is located and fire is detected before it occurs. Linear Heat Detection is a versatile and economical fire detection product. Considering the initial investment, maintenance, operating costs and operating performance, .Extrem offers economical and performance solutions for fire detection needs. ACCESS CONTROL SYSTEMS: We offer solutions for controlling and reporting the circulation in the areas offered to students and staff in the school, campus. Due to the determined business, security and occupational safety needs, the doors of risky rooms are controlled by the access control system. Control application covers all specified areas. It is possible to report all movements and make the necessary controls online. The buildings belonging to the enterprise can be controlled and monitored from the same central software wherever they are in the world. FIRE DETECTION AND ALARM SYSTEM TEST EQUIPMENTS: Testing and regular maintenance of systems installed with fire detection equipment is one of the overlooked needs in our country. Platin Technology has offered suitable test gases, cleaning and control apparatus for all detector types such as smoke, heat, gas and carbon monoxide, which make up the fire detection system, to the use of professional operating and fire system maintenance companies. EMERGENCY ANNOUNCEMENT AND SOUNDING SYSTEM: Emergency announcement and voice-over systems installed in the facility are the solutions used for rapid evacuation in possible emergency situations that will provide the necessary ambiance by broadcasting music in suitable areas in daily life. DISABLED LIFE SOLUTIONS: These are electronic solutions offered to meet the daily needs of students, teachers, visitors and employees with disabilities within your business without risk and easily, and to minimize possible risks. What are the risks? We offer solutions to the need for help and urgent struggle in wet areas, the need for medical assistance in general areas, and the risks of reaching exits without assistance in emergency evacuation processes. DETECTION OF FLAMMABLE, EXPLOSIVE AND TOXIC CHEMICALS AND GASES: The gases generated during the use and storage of gases used for various purposes in areas such as workshops, laboratories, etc. pose a risk in terms of worker health and workplace safety. LASER TYPE FIRE DETECTION AND SMOKE DETECTION EQUIPMENTS: At points where high ceiling point type fire detection systems do not work efficiently, laser beam detectors are used to minimize operational and installation costs, economic and fire risks. The system ensures that the fire is detected at the time of its first occurrence by mutually controlling the beam of light it generates. Our experts offer solutions to minimize risks specific to the education sector. Please contact us for special solutions for your projects in Turkey and all countries in our service area.

iş merkezi , çok katlı binalar ve plazalar için elektronik güvenlik , yangın algılama ve zayıf akım çözümleri Our experts, who offer special solutions for General Directorates, Plazas, Business centers, Multi-storey buildings and plazas where there are thousands of people and visitors at the same time, where institutions, organizations and companies are common, offer the solutions below for multi-storey plaza and office buildings. FIRE DETECTION AND WARNING SYSTEM: Control of all office, administrative, mechanical areas and parking lots of the plazas against fire risk.It provides instant detection of the first formation of the fire in the form of particles and allows the fire to be intervened before it grows. For this purpose, the fire alarm systems installed by Platin Teknoloji prevent the life-threatening of the personnel in the environment and material damage to the building. The system includes a fire control panel. It evaluates the warnings coming from various type detection elements suitable for the needs of your business and activates the sirens, flashers, telephone dialer. It delivers detailed information to the call center and security point. While all these events are taking place, from the moment the fire is detected, it is ensured that the previously prepared alarm scenarios are activated by sending information to the elevator, ventilation system, pressurization fans, smoke evacuation system, turnstiles, etc. CLOSED CIRCUIT CAMERA SYSTEMS: Camera systems, which are used to minimize the risks in indoor and outdoor areas and special security and operational risks within the boundaries of the plaza, produce indispensable solutions for operational security. We offer camera solutions and NVR recording devices and command control center solutions suitable for all business and manufacturing conditions. Our products do not only register. It produces alarm scenario solutions in order to prevent the occurrence of events, problems and risks by performing event analysis. All systems record in the structure and quality determined by the relevant institution and ensure that images of appropriate quality are accessed when necessary. DETECTION OF FLAMMABLE, EXPLOSIVE AND TOXIC CHEMICALS AND GASES: Necessary perceptions are made to minimize the risks caused by flammable explosive gases and chemicals used in the mechanical areas of heating, cooling, etc. of all buildings, and to prevent damage to the personnel and the enterprise. Platinum technology engineers provide customized solutions for your business to identify these risks caused by gases and chemicals and to evacuate them before the risk grows. FIRE DETECTION WITH VERY SENSITIVE AIR SAMPLING AND ANALYSIS SYSTEMS: The sensitive laser sensor, which continuously samples air from the system room, ensures that the quality of the air passing through the sampling room is monitored and the fire is detected at the moment of its occurrence. LASER TYPE FIRE DETECTION AND SMOKE DETECTION EQUIPMENTS: At points where high ceiling point type fire detection systems do not work efficiently, laser beam detectors are used to minimize operational and installation costs, economic and fire risks. The system ensures that the fire is detected at the time of its first occurrence by mutually controlling the beam of light it generates. ELECTRIC PANELS AUTOMATIC FIRE EXTINGUISHING: Cabinet type extinguishing systems that provide low initial investment and operating costs and high performance are used for electrical panels and cabinets where risks are concentrated. It provides effective extinguishing with HFC227ea and HFC125 etc. extinguishing gases used in fire extinguishers. They are odorless, colorless, non-residual gases that do not harm electrical material. WATER MOISTURE DETECTION AND ALARM SYSTEMS: Prevention of damage to the establishment as a result of leakage and humidity that will occur out of control from risky areas for warehouse, boiler room, mechanical areas and building, Detection of possible floods, Warning of the relevant parties and according to the prepared scenario, the water evacuation engine heating system, ventilation system These are the solutions to put into use. AUTOMATIC FIRE EXTINGUISHING SYSTEMS: Special risks such as system room, operational areas, vault room etc. that will cause significant damage to the enterprise and solutions that will extinguish electrical fires in a very short time are offered, Automatic extinguishing systems to prevent damage to the business and manufacturing processes. The relevant extinguishing gas / chemical is selected and designed, taking into account the special situation of the establishment and the area where it will be established. The system user will make independent fire detection and initiate the extinguishing process. CABLE TRAYS, VENTILATION SYSTEMS FIRE DETECTION AND DETECTION SYSTEMS: With a special sensor cable to be installed in high risk and difficult to detect areas such as electrical installations and ventilation ducts, sudden temperature changes are detected at the points where it is located and fire is detected before it occurs. Linear Heat Detection is a versatile and economical fire detection product. Considering the initial investment, maintenance, operating costs and operating performance, .Extrem offers economical and performance solutions for fire detection needs. ACCESS CONTROL SYSTEMS: We offer solutions for controlling and reporting the staff visitor circulation in all areas of the business center. Due to the determined business, security and occupational safety needs, the doors of risky rooms are controlled by the access control system. We offer solutions such as personnel card, fingerprint, eye recognition, etc. at the entrances to these rooms. Access control application covers all determined areas starting from the first entry point of the enterprise. It is possible to report all movements and to make the necessary controls online. The buildings belonging to the enterprise can be controlled and monitored from the same central software wherever they are in the world. TURNSTILE AND BARRIER SOLUTIONS: Building and floor entrances are arranged and limited with turnstiles used in integration with the access control system in all areas where human traffic in the building needs to be controlled. Thus, it is used for the purpose of controlling the transitions at the points and places where the transition should be made within the order determined by the general directorate. All of our turnstiles are microprocessor-based and allow only one person to pass at a time. Turnstiles have automatic falling arm feature and illuminated and audible indicators. SYSTEM ROOM ENVIRONMENTAL MONITORING AND REPORTING SOLUTIONS: It has been developed to ensure that important technical rooms can operate without risk. It monitors the criteria such as heat, humidity, fire, smoke, network-ups voltages, unauthorized entry etc. of special rooms such as system room and ensures that the relevant persons are warned and reported without a possible detection. . In addition to the ability to monitor system parameters, it provides integration with other systems in case of an event. In cases of sudden temperature increases and decreases, ups and network voltages, water and humidity raids, unauthorized entry, etc., the system room provides a warning in the form of e-mail or SMS. In this way, the alarm & technical malfunction that caused the error is detected as soon as possible and effective and fast measures are taken. FIRE DETECTION AND ALARM SYSTEM TEST EQUIPMENTS: Testing and regular maintenance of fire detection system equipment established by making serious investments in enterprises are among the overlooked needs in our country. Platin Technology has offered suitable test gases, cleaning and control apparatus for all detector types such as smoke, heat, gas and carbon monoxide, which make up the fire detection system, to the use of professional operating and fire system maintenance companies. EMERGENCY ROUTING LUMINAIRES: In case of a power failure, especially in multi-storey buildings, in case of a power outage, such as fire, earthquake, the electrical energy of the building or building is interrupted for safety purposes, when a circuit breaker or a fuse is opened, it is automatically activated and evacuated. are devices and systems that guide users for EMERGENCY ANNOUNCEMENT AND SOUNDING SYSTEM: Emergency announcement and public address systems are the solutions used for the rapid evacuation and direction of the employees in the buildings and safely in emergency situations. SECURITY AUTOMATION SOLUTIONS: It installs security automation systems against theft and sabotage. These systems, which are needed today, are the definitive solution to robberies and unauthorized access. The possibility of false alarms of these systems is very low and they provide the opportunity to intervene in the system only with the correct password. There are products and systems with different detection features in security systems according to the purpose and protection system. Electronic systems integrated with alarms are systems in which the security risks of large-scale areas such as Head Office, regional directorate, branch, campus, etc. are minimized by instantly activating scenarios and taking necessary precautionary warnings. KEY MANAGEMENT SYSTEMS: It is ensured that all keys of the common areas in the building can be easily accessed when necessary and key management solutions that enable the reporting of key usages to prevent key confusion and to protect them securely. LIVING SOLUTIONS WITHOUT BARRIERS: These are electronic solutions offered for disabled visitors and employees to meet their daily needs risk-free and comfortably within your business and to minimize possible risks. What are the risks? We offer solutions to the need for help and urgent struggle in wet areas, the need for medical assistance in general areas, and the risks of reaching exits without assistance in emergency evacuation processes. It offers electronic security solutions to minimize the risks of multi-storey buildings, plazas and office areas. Please contact us for special solutions for your projects in Turkey and all countries in our service area.

We offer technological solutions to your business's security, fire, worker safety and disabled accessibility problems. ANSWERS Platin Teknoloji offers solutions across Turkey with the world's leading brands for sectoral risks and security problems specific to projects. Maritime and Marine Services Historical Artifact Restoration Solutions Industrial Facilities Hospitals and Healthcare institutions Business Centers and Plazas Defense industry Banking and finance Automotive Schools and Educational Institutions Solar power plants Merchandising and Retail Mining Schools and Educational Institutions Solar power plants Merchandising and Retail Mining

ESP 100-24 power supply Smart card reader for SIM-sized smart cards HID ® Omnikey ® 6121 Mobile Card Reader The OMNIKEY® product brand of HID Global, one of the world's leading manufacturers of innovative smart card readers, has developed a portable USB smart card reader. The OMNIKEY 6121 is a fully functional smart card reader for SIM sized smart cards and is particularly well suited for use with mobile devices. Applications for this reader include GSM applications downloading from internet to SIM card, W-LAN authentication, secure PC login, PKI for mobile users, digital signature, secure mobile banking and online transactions, loyalty programs, healthcare solutions and many more applications in the future. Main Features elegant design High speed data transmission All major operating systems supported Fully CCID compliant Hotplug Driver available keychain loop ESP 24 100-24 Power Supply Brochure

audible light emergency exit routing products integration and connectivity solutions for accessibility applications in existing buildings What is Audible Lighted Emergency Exit Routing? What is the IP address of the audible light emergency exit routing system requested with the 77.185.1017 pose explanations, which have emerged with the increasing accessibility applications in recent years? Today, in many buildings, when an emergency occurs such as fire, flood, earthquake, etc. , alarm sirens, flashers, horns placed in various parts of the building work in as wide an area as possible at the same time to warn people against a sudden danger. There are exit signs and exit signs used to direct the users inside the building to the emergency exit. However, in a smoke-filled environment, emergency signs created by visual guidance may be less pronounced or completely ineffective. Building occupants may not be familiar with the building and associated emergency exit routes, but they can still access emergency exits somehow with directions and signs. So, how will people in panic and shock, hearing and visually impaired individuals reach the emergency exits without help? For visually impaired people to evacuate the building quickly without additional support during the evacuation processes of buildings, conventional emergency direction luminaires and signs will not be sufficient and they will experience serious difficulties. Are there any signs? Solutions that will answer the question should be applied. Disabled audible light guiding luminaires are new generation emergency exit evacuation routing solutions. In short, you can define it as a sound exit armature. The engineering application of directional audio technology faces some problems. Commonly used emergency fire alarm sounds cause confusion for building occupants. Users in buildings may not know what to do when they hear the sound. For this reason, there is a need to clarify escapes in addition to the voice alarm and siren. Users who try to go out into the corridor and steer towards the escape stairs after the siren sound at which the emergency warning is made, will proceed confidently to hear the announcements that they will understand that they can reach the fire stairs for emergency escape when they approach the audible and illuminated emergency exit direction luminaire, when they move in the direction of the sound, and that they are approaching with an increasingly clear sound announcement. This message will enable them to move quickly and safely without the need for visual guidance and evacuation sign systems without having knowledge of the Building. Conventional fire alarm and voice alarm systems both emit an audio signal when an emergency occurs in the building. Disabled emergency exit guidance system with audible light is an additional evacuation aid; however, it is not a system that replaces the above-mentioned fire alarm and voice alarm system. Disabled emergency exit sound and light announcement fixtures should be placed above emergency exit doors and in complex corridor turns. However, emergency audio and light guidance products only on fire escape stairs and emergency exit doors may not provide enough directional sound to reach most of the users. In addition, there may be more than one exit in large, open and large buildings, but the sounds of more than one disabled audible lighted emergency exit routing product may interfere with each other and create confusion. For this reason, detailed project work should be done for disabled emergency sound and light guidance device equipment placement and integrated with the fire scenario. Considering this information It is possible to reach the fire doors and escapes with audible and illuminated announcements from the emergency exit doors. In an emergency, the environment can be noisy due to siren sounds. The emergency voice guidance warning sound should be at least 15 dB lower than the ambient sound level. Despite the ambient noise, it can be heard easily. Orientation can be determined It will make it easier to reach the exit points with the increasing sound level as you get closer. How to Integrate Sound Lighted Emergency Exit Guidance System in Existing Buildings? The fire detection system, which is the backbone of the evacuation in case of possible fire, earthquake, etc. in the buildings, will form the backbone of the products for directing the disabled with sound and light to the emergency exit and will enable them to be managed through the central system. In this case, we will encounter 2 different fire detection systems in the existing buildings. What are these systems? 1- Conventional Fire Detection Systems: The sensing panel used in the system consists of the regions where the sensing elements are connected. The number of zones is related to the capacity of the panel. 20 detectors can be connected to each zone. The panel also has inputs and outputs to connect fire alarm buttons and sirens. When any detector detects or the fire alarm button is pressed, a warning signal comes from the zone where the detection element belongs to the panel. For example: If any detector detects in a region where 20 detectors are connected, a warning will come from that region. (But it will not be clear from which detector the warning came.) 2- Addressable Fire Detection Systems: In addressable systems, there are loop lines to which the sensing elements are connected. The number of loop lines and the wiring distance depend on the panel used. 125-127 addressable elements (detector, button, input module, output module, addressable siren) can be connected to a loop line. The sensing elements in the loop can be divided into zones, and each sensing element can be individually detected by the panel thanks to the addressing software it contains. In other words, when any detector detects, the location of the detector can be determined individually on the panel or optionally on the PC where the projects of the building are loaded. Conventional systems and addressable systems are selected and dimensioned according to their application areas. Conventional elements are sufficient for systems with a small number of sensing elements and offer inexpensive solutions. How can we integrate sound and light emergency exit routing products into existing fire detection systems. 1. We can provide direct connection of conventional and addressable fire detection systems with the fire detection system by making a direct connection to the conventional siren lines that activate the sirens with 12-24 VDC at the time of alarm. With this connection, direct integration into the fire detection system is provided. There are solutions that can provide the same connection with a wireless transmitter that will receive information from the nearest siren line. You can control the control modules of the addressable fire detection systems and the emergency exit routing system devices with sound light and it will be possible to integrate them into the fire scenario. It is activated in possible emergencies and will be silent when disabled from the central system. There are products that can provide the same connection with a wireless transmitter that will receive information from the nearest loop line with the relay module. Sound and Light Emergency Exit Guidance System Product Selection Chart Sound and Light Emergency Exit Guidance System Frequently Asked Questions ? - HOW MUCH IS THE ANNOUNCEMENT TIME? - ANNOUNCEMENT WILL CONTINUE UNTIL THE ALARM TRIGGING THE SYSTEM CONTINUES. - CAN THE CONTENT OF THE ANNOUNCEMENT BE CHANGED? - STANDARD ANNOUNCEMENTS ON IT CAN BE REPLACED WITHOUT ADDITIONAL EQUIPMENT - WILL IT WORK IN ELECTRICITY FAILURE? - THE DEVICE WORKS CONTINUOUSLY FOR 24 HOURS IN ELECTRIC OUTPUT AND CAN MAKE 4 HOURS CONTINUOUS ANNOUNCEMENT. - WHAT IS THE INTENDED USE OF THE FLASHER ON IT? - EMERGENCY EXITS CAN BE PROVIDED FOR THE DISABLED WITH LIMITED VISION WITH FLASHERS COMPATIBLE WITH ''EN 54-23''. - IF A FIRE STARTS IN THE AREA TO BE evacuated, HOW DO WE AVOID PUTTING THE DISABLED PEOPLE AT RISK? -UP TO 20 SENSORS CAN BE CONNECTED TO THE DEVICE USING WIRED - WIRELESS DETECTOR INPUT. IN THIS WAY, THE SMOKE IN THE AREA IS PROVIDED TO BE DETECTED AND ANNOUNCEMENTS ARE ACTIVITIZED TO ENSURE EVOLUTION IS MADE FROM OTHER POINTS. FOR OUR DISABLED VOICE LIGHT GUIDANCE PRODUCTS

Calectro   Havalandırma Kanalı Yangın Algılama  ve Alarm Teknolojisi  Türkiye 'de Calectro Flood and Moisture Detection Systems Calectro was founded in Gothenburg in 1969 by a young technician, Karl Johan Pettersen. The company was established as an agency company for suppliers in Switzerland and Denmark. Including program electronic thermostats, level controls, time relays etc. The main idea was to find customers with special needs and develop them in close cooperation with the customer. This quickly led to the development of the first electronic overfill protection approved for oil tanks. A completely new electronic freezer protection has also been developed through close contact with a number of control and regulatory companies. In the 1970s and 1980s the company expanded significantly, and in the late 1980s it was expanded to include its own development and production, including Calectro's offering. One-pipe smoke detector for the UG-1 ventilation system, which has become an instant success. Since then, Calectro has offered to develop quality products from accredited suppliers, as well as products developed specifically for its customers. 50 years after its inception, Calectro is a full-fledged technology and distribution company with dealers in many countries and a strong Swedish customer base. Perhaps the best known product is the Uniguard® single-pipe smoke detector, currently used by many project firms in the control and regulation industry in Turkey, Sweden and Europe. Water and Moisture Leak Detection Systems in Platinum Technology; Thanks to this system applied to system rooms, cash registers, storage areas and places affected by water and moisture, the system will activate the siren unit in case of moisture or water formation that may be a risk. According to the pre-prepared scenario, the water discharge engine will activate the heating system and the ventilation system. and if it occurs outside of working hours, it will transmit information by calling the users' phones. Flood detection and alarm system can send mail and sms according to the requests. You can also keep all information in the event memory and report it. With the smart phone application, you can manage the system, report it and receive instant notifications. You can reach Turkey-wide Calectro flood and moisture detection products and special prices for your projects from Platinum Technology. Digital Type Detection Systems - Equipment used - Water detection sensor - Humidity detection sensor - Control Panel - Siren - Telephone search device - Web connection module - SMS module Water Humidity and Leak Detection System Application Areas IT / Server system Rooms Electrical Rooms Heating Cooling centers Data Centers · Hotels Kitchen / Toilet & Vending Areas Hospitals Empty Complexes Supermarkets · Museums Art Galleries Archive Facilities smoke detection in ventilation ducts The purpose of smoke detection in Calectro ventilation ducts is to detect smoke in ventilation systems at an early stage and to send an alarm to the control unit when detected. They can then quickly implement countermeasures such as closing dampers and initiating forced ventilation to limit the spread of smoke. How does single tube smoke detection work in ducts? The system has an air probe (called a venturi tube) integrated control unit cf58d_3194 It is based on bb3b-136bad5cf58d_ (the Uniguard smoke detector is also available with an external control unit). The venturi tube delivers air from the duct to the detector housing installed outside the duct, where a smoke detector detects potential fire particles in the air. In the event of an alarm, the smoke detector sends a signal to the control unit via relays, which then closes the dampers, stops the fans / activates the siren and forwards the alarm to the automation center . The aerodynamic design of the enclosure and tube is crucial to the ability to detect small levels of smoke particles in the air at an early stage Advanced venturi tube technology Uniguard's patented venturi tube is equipped with aerodynamic flanges, the most efficient way to draw air from the depths of the entire ventilation duct and deliver it to the smoke detector. This facilitates the detection of flue gases even at small doses and low air velocities. The effect of the venturi tube has been measured and documented by external laboratories. Flow-optimized enclosure Uniguard's patented enclosure series (UG-3/4/5) has been specially designed using simulation software to achieve maximum flue gas concentration around the smoke detector. In combination with the venturi tube, the enclosures create unmatched sensing performance even at low air volumes. It also has an indicator for easy inspection of the airflow. Automatic sensitivity adjustment Uniguard's smoke detectors have a built-in, automatic sensitivity adjustment that measures the baseline value in airflow each day and compensates for possible changes in the system over time. This minimizes the risk of unwanted alarms and unnecessary maintenance. Led Status Indicator The Uniguard UG-3 version has both an alarm indicator on the smoke detector and LEDs on the back to make it easy to check the alarm status in confined spaces.

eaton yangın algılama alarm ve ihbar sistemleri cooper EATON Fire Detection, Warning and Alarm Systems Eaton offers you its expertise in the development of fire alarm systems based on strong heritage from names such as Cooper, Menvier, JSB, Nugelec and Fulleon. Eaton works with industry-leading organizations as well as its customers to meet the highest standards; It has increased its recognition globally with its products that you can see in many places such as stadiums, multi-storey buildings, government buildings, airports, bus terminals, train stations, hospitals, nursing homes, industrial facilities, retail outlets and social facilities. Eaton; produces market leading addressable and conventional fire alarm systems that are compatible with specific application requirements, efficient, user-friendly and can be configured according to specific applications. Eaton offers complete complete fire system solutions and manufactures all of its products. You can safely use it as a completely complete fire detection and alarm system, as all system components are fully compatible with each other. All equipment complies with international standards and this conformity is certified. It is absolutely vital that all elements of the fire detection system are fully compatible with each other. To support this philosophy, our large multidisciplinary research and development team based in Doncaster is responsible for integrating the latest technology into Eaton's Fire Systems Business range. Eaton's fire systems business products have international approvals, the CF3000 and CF1000 series are Europe's first touchscreen analog fire panels available in 27 languages at your fingertips. Cooper Eaton Fire detection systems Turkey-wide solutions at Platin Teknoloji. Eaton Philosophy Investing in people Partnering with our clients to develop open, long-term relationships Have an unpretentious, open and honest approach to the business Continuous investment in research and development Investing in production facilities to keep them at world standards To produce products that fully comply with the standards Working environmentally - in the products we design and the facilities we make them To have high ethical standards eaton complies with standards. EN 54 CF1100VDS Electronic Addressable Fire Alarm Control Panel - 1 Loop, 200 Address Capacity, Touchscreen LCD Display, 16 Zone LEDs, 2 Siren Outputs, Power Supply CF1200VDS Electronic Addressable Fire Alarm Control Panel - 2 Loops, 400 Address Capacity, Touchscreen LCD Display, 16 Zone LEDs, 2 Siren Outputs, Power Supply CF2000GCPD Electronic Addressable Fire Alarm Control Panel - 2 Loops, 400 Address Capacity, LCD Display, 32 Zone LEDs, 2 Siren Outputs, Power Supply, Non-Networkable CF30002G Electronic Addressable Fire Alarm Control Panel - 2 Loops, 400 Address Capacity, Touchscreen LCD Display, 96 Zone LEDs, 4 Siren Outputs, Power Supply CF30004G Electronic Addressable Fire Alarm Control Panel - 4 Loops, 800 Address Capacity, Touchscreen LCD Display, 96 Zone LEDs, 4 Siren Outputs, Power Supply CTPR3000 Full Function Repeater Panel, LCD Touch Screen, Network Connection with CF3000 and CF1000 Series Control Panels CAP320-EU Electronic Addressable Optical Smoke Detector, Internal Short Circuit Isolator CAPT340 Electronic Addressable Combined Optical Smoke and Heat Detector with Internal Short Circuit Isolator CAH330-EU Electronic Addressable Constant Temperature and Temperature Rise Rate Detector with Internal Short Circuit Isolator CBG370S Electronic Addressable Fire Alarm Button with Internal Short Circuit Isolator CBG370WP Electronic Addressable Manual Call Point with Internal Short Circuit Isolator, Outdoor Type IP65 CSI350 Loop T-Connection Module CIO351 Electronic Addressable, Independently Programmable 3 Channel Input / Output Module with Internal Short Circuit Isolator (Reset during reset) CIO351S Electronic Addressable, Independently Programmable 3 Channel Input / Output Module with Internal Short Circuit Isolator (Resets during Alarm Silencing) CFC301 3-Channel Technical Input / Output Interface Unit CZMU352 Electronic Addressable Zone Supervision Module with Internal Short Circuit Isolator CMIO353 Electronic Addressable, Single Channel Input / Output Module, 230V AC Relay Output, with Internal Short Circuit Isolator CSC354 Electronic Addressable, Independently Programmable 4 Output Sounder Control Module, Internal Short Circuit Isolator, Power Supply CAS380 Electronic Addressable Socket Type Electronic Siren, 95dB, With Internal Short Circuit Isolator CASBB384 Electronic Addressable Socket Type Flasher Electronic Siren With Internal Short Circuit Isolator

ACA ES 12 Ekonomik engelli sesli ve ışıklı acil çıkış kapısı yönlendirme anons armatürü ile acil durumda ses ve ışıkla yangın kaçış kapılarına yönlendirilmesi çözümleri. ACA ES 12 DISABLED SOUND LIGHT GUIDANCE ACA ES12 Voice and Light Announcement Emergency Exit Guidance System for Visually and Hearing Impaired People In public buildings, social and cultural areas, Port, Station, Station, Shopping areas, Stores, Bank, Post center, Market, etc.In case of fire or emergency people are directed to the exits with Emergency Exit signposts placed for evacuation of the building. In accordance with the regulation of accessibility from these buildings, it is necessary to ensure that the buildings are directed to the Emergency exit doors and evacuated from the building in a safe manner in case of fire or emergency. According to the architectural structure of the system buildings, the fire exit corridors and the areas where the fire doors are located, point-by-point announcement units are installed according to their architectural and constructional features and a direction-description announcement about the evacuation point is recorded. Audio descriptions should be concise '' Emergency exit is here '', '' Door is here '', '' Exit is here '' Voice and light announcement device and emergency announcement system are generally confused with each other. Voice alarm provides announcement to be heard at all points of the building The audible, illuminated emergency routing fixture, on the other hand, enables the emergency exit door to be reached point by point by following the sound with a sound announcement that increases as it approaches the door. What is Disabled Sound and Light Emergency Exit Guidance? How to Integrate Sound Lighted Emergency Exit Guidance System in Existing Buildings? For All Our Disabled Audio Light Guidance Products '' Trying to produce a sound that will suppress the sound of the emergency announcement and the sound of the siren will cause the sounds of the device used for emergency exit routing to be mixed with each other. '' It is the sound to be heard when approaching the desired door and the sounds of the doors do not interfere with each other. It provides the emergency exit evacuation by starting the direction directions with the point announcement with the command received from the alarm system or the emergency button, and continuing the point announcement and voice guidance repeatedly until the fire alarm system or emergency buttons return to their previous position, directing them to the nearest emergency exit doors in the building where the visually impaired are located. In buildings with more than one exit door or floors, the point disability emergency announcement units detect the smoke density in their area and direct them to the other floor or emergency exit doors with different announcements, preventing the visually impaired from entering the fire zone. Frequently asked question: What is the purpose of the flasher on the device conforming to the EN 54 standard? Notifying hearing-impaired individuals that an emergency has occurred To enable the hearing-impaired individual to reach the emergency exit door with the flasher light. Providing access to the door with the flasher light that creates violence that even individuals with low vision can see ACA ES12 Series disabled voice guiding fixture advantages: Direct connection can be made to the conventional siren line of all addressable, Conventional fire detection system brands, regardless of brand, EN54 compliant. Wired and wireless connection options that will provide easy application without modification in existing buildings, EN -54 compliance. Integrated battery and smart charging circuit for outage operation, Changeable and prioritized announcement options. Working in full compliance with the building fire scenario with 4 different sound recordings. Evacuation, evacuation through another door, prohibited passage, Fire scenario. Software that tracks battery and battery life and health status. Legal and uninterrupted communication with 868 mHz wireless connection frequency. Easy changeable sound recording, Live, from PC, etc.

Hırsız alarm ve güvenlik otomasyon sistemleri Burglar Alarm and Security Systems Platinum technology offers an end to new generation security risks Security system, Burglar detection, alarm and notification system solutions. It establishes systems against theft and sabotage. These systems, which are needed today, are the definitive solution to robberies and unauthorized access. The possibility of false alarms of these systems is very low and they provide the opportunity to intervene in the system only with the correct password. There are products and systems with different detection features in security systems according to the purpose and protection system. Security Automation Systems: The alarm system, in which the burglar alarm system and other electronic systems are integrated, are the systems in which the security risks of large-scale areas such as Shopping malls, Plaza, Headquarters, Factory, Campus etc. Burglar Alarm Systems: These are systems established to monitor, deter and warn uncontrolled access to areas such as workplaces, houses, offices etc. Generally used products in systems; Alarm panels, PIR Motion detectors, Beam detectors, optical smoke detectors, heat detectors, Gas detectors, Glass break detectors, Impact sensors, Beam detectors, Phone seekers, GSM seekers, Internal and external sirens, Magnetic contacts. Alarm panels: They are of 2 types, which can be connected to the center (with communicator) and local (without a communicator). The choice of panel capacity is determined by the size of the project. If the area to be protected is large and the number of detectors is large, the number of zones of the panel should be considered. System and panel control is possible with a keypad. All programming is done from this password unit. The panels used are microprocessor controlled and have a wide variety of features. Since the alarm panels are battery powered, they are not affected by power outages and have extra protection against sabotage. Since the panel includes a communicator, it can continuously send digital information over the telephone line. Thus, it is possible to monitor the operation and control of the system 24 hours from the center to which it is connected. By providing web connection of new generation alarm panels, it is possible to control, monitor and monitor instantly, remotely and closely, from smart phones. PIR Detectors: It is the type of detector that detects the movements of creatures entering the protection area without permission and instantly sends information to the panel. It has a wide variety of alternatives according to its place of use and characteristics. Animal detection, optical, wireless are among these options. Optical Smoke Detectors: Detector type that detects the smoke formed in the protection area and sends information to the panel. Heat Detectors: Detector type that senses the heat increase in the protection area and sends information to the panel. Gas Detectors: The type of detector that detects the gas leak occurring in the protection area and sends information to the panel. Glass Break Detectors: The type of detector that detects the sound of glass breakage in the protection area and sends information to the panel. Impact sensors: The type of detector that senses the vibration in the protection area, where it is applied and sends information to the panel. Beam detectors: The type of detector that is applied to windows in the protected area and sends information to the panel by detecting when intrusion occurs. Phone Dialer: These are the modules designed to call other different phone numbers starting from the first number stored in the memory and send audible alerts when an alarm occurs in the protection area. GSM Dialer: It is a product that provides reliable communication, designed to be used in areas with no telephone lines, interruptions or problems. External Sirens: These are sirens designed to be used in outdoor environments, compatible with all security systems, resistant to all weather conditions and impacts, technical equipment to meet all your needs in your security systems and deterrent high sound power. Indoor Sirens: These are sounders with high sound power, designed for use in indoor environments, compatible with all security systems. Magnetic Contacts: It is the product that informs the alarm panel that doors and windows, which are usually attached to open and close surfaces such as doors and windows in the protection area, have been opened without permission. All alarm systems can be connected to the alarm control center via GSM line, terrestrial line and / or ADSL modem, and all alarm-fault information can be monitored remotely through this center. Platin Teknoloji identifies the technological security needs of its customers and produces solutions from GE UTC CADDX, TEXECOM, AJAX, DSC, PARADOX, HONEYWELL Series products. Limited stocks. Our warehouse is available WIRELESS ALARM SET CAMPAIGN

Ziton Fire Detection Equipment in stock Leading manufacturer Carrier Fire Ziton Fire Detection , Warning ve Alarm Systems Ziton Fire Alarm Systems Features that Make a Difference; • Simple and convenient front fire control paneli and • Fast Ziton Fire detection system installation and configuration • Automatic fire scenarios and programming feature • Ability to undo recent changes • Offline programming of the fire panel and uploading the configuration file to the USB device • Preferential cards and modules that can be easily integrated into the Ziton fire detection panel. • Remote maintenance and fault detection of the fire alarm panel over TCP/IP • In case of power cuts yang panel standby time up to 72 hours • Graphical EN54 compliant LCD display with icon support • Ziton-specific language options that can be easily changed from the fire panel • Surface / flush * / 19” rack* mounting Superior performance Features from single control panel applications to applications requiring small/medium network Ziton fire detection and alarm systems, one of the leading brands of UTC Carrier Fire & Security; UTC Ziton is offered throughout Turkey with the widespread network of Platinum technology. In addressable systems, there are optical, heat and combined fire detection detectors, input and output modules, alarm buttons, addressable sirens that can be connected to the loop lines to which the detection elements are connected. The number of the loop line and the wiring distance depend on the panel used. 127 addressable fire detection equipment can be connected to each loop line. Sensing elements in the loop can be divided into software regions, and each sensing element can be individually perceived by the panel thanks to the addressing software it contains. In other words, when any detector detects, the location of the detector can be determined individually on the panel or on the pc where the projects of the building, which can be used optionally, are loaded. Conventional systems and addressable systems are selected and sized according to their application locations. Ziton, Kilsen, Aritech Series from UTC Carrier fire detection brands, Turkey-wide system solutions of high-tech equipment are provided by Platin Technology and distributors, engineers and technical teams with more than 20 years of project design and application experience in the sector. Fire Alarm Systems Distinctive Features ziton Simple and convenient front panel control Fast system setup and configuration Increased automatic programming feature • Undo last changes feature Offline programming and ability to upload configuration file to USB device Easily configurable preferred cards and modules Remote maintenance and error detection over TCP / IP Up to 72 hours of standby time Graphical EN54 compliant icon supported LCD display Easy to change language options Surface / flush * / 19 ”rack * mounting Superior performance from single panel applications to applications requiring small / medium sized networks Advantages of Ziton series addressable systems 1- In Interactive Addressable systems, clear information of the place where the alarm, malfunction etc. information comes from can be reached. In conventional systems, region (floor) information comes. The net location of the detector must be checked for the region. 2- In addressable systems, alarm, error, loss, malfunction and calibration information of the detectors are displayed on the panel as a point. 3- In addressable systems, 127 equipment can be operated on each cable line. In conventional systems, this number is limited to 20-25 detectors. 4- In addressable systems, in the problem of the wiring line, the system provides access to information about the location of the continuing problem. In conventional systems, the part after the line is completely disabled. 5- Equipments such as input module, output module, siren module etc. from addressed systems can operate over the loop line. In conventional systems, general alarm and error information can be received from the panel. 6- In addressable systems, wide range of alarm scenarios that will be activated in case of fire can be applied. In summary, it offers solutions in large and medium-scale projects with low infrastructure, operating and initial investment costs thanks to its modular structure and technology. Ziton ZP3 Series Network Control Panels ZP3 control panels have 1, 2 and 4 loop capacity ZP3 series fire alarm panels that can be networked with each other, each supporting 127 x XX addressable devices. Ziton ZP3 fire alarm panels are compatible with both ZX series algorithm based, interactive and ZP series analog addressable field elements. These panels also have interfaces to fulfill the necessary network communication for medium and large-scale systems, fiber-optic and IP-based communication facilities. Repeater panels compatible with ZP3 control panels, computerized graphic monitoring software and interfaces used for integration with automation systems are also available as optional. Additional input / output circuits can be created with the cards that can be added to the panels, and panel type printers can be connected. Ziton MODULA Stand-Alone Control Panels MODULA series control panels have a structure that can be expanded modularly, starting from 1 loop to 8 loops, up to 1016 address capacity in total. It also supports conventional sensing circuits up to 48 zones. It is compatible with analog addressable field elements called ZP series. With its large LCD screen, alarm zone LEDs and easy programming alternatives, it fully meets all fire detection needs of medium and small scale applications. Multi-Sensor Algorithm Based, Interactive Fire Detectors ZX 832 algorithm-based, interactive fire detectors use their microprocessor and algorithms to generate alarm decisions depending on the smoke and temperature level coming from their sensors. ZX832 Detectors do not need to send any analog value to the panel and evaluate it there by generating the alarm decision completely in-house. Thanks to the algorithms used, false alarms are prevented and possible real alarms can be detected faster. Single and Multi Sensor Ziton Analog Addressable Fire Detectors ZP3 and MODULA are compatible with Ziton control panels, optical smoke and ionization smoke detectors, as well as multi-sensor detectors combined with optical smoke and temperature sensors, and point temperature detectors that can be programmed as both constant temperature and temperature rise rate. The analog values measured by the detectors are continuously sent to the control panel through the detection lines, and alarm and failure situations are decided by the algorithms installed in the control panels. Addressable Ziton Input, Output and Control Modules Addressing conventional type detectors and buttons, monitoring modules for monitoring the alarm and fault signals of smoke control devices such as fans and dampers, sprinkler systems, as well as audible / illuminated alarm devices, audible evacuation systems, smoke control devices and other building control systems to the specified fire scenarios Output modules and short circuit isolator modules required for proper activation are included in the analog addressable product group. Ziton modules are specially designed for in-panel rail mounting, providing ease of installation and assembly with their small dimensions. Ziton Addressable Audio / Light Warning Devices Addressable sound / light alarm devices are compatible with the addressable loop lines of the ZP3 and MODULA control panels. 124 of these addressable devices, which are capable of producing high sounds despite their low current consumption, can be connected to the same loop line together with detectors and modules and they can perform sufficient warning operations. One of the most important features of these devices is that they can be activated individually and they do not require additional cables for feeding. Addressable warning devices can also perform self-test procedures on their own, thanks to the test microphone inside. Intrinsically Safe Ziton Detector, Button and Modules One of the preferred methods for safe fire detection in industrial environments with flammable and explosive materials is applications using Intrinsically Safe (IS) devices. ZP3 and MODULA series panels offer a complete range of interfaces that can be connected to addressable loop lines, galvanic barrier, intrinsically safe single and multi-sensor detectors, button and input modules. Intrinsically safe barriers, detectors and audible / light warning devices have ATEX certificate for ia class explosive atmospheres. Our Ziton Fire Detection and Alarm Product range ZP3 serisi panelleri bir süredir seri üretimi sonlandırıldığı için mevcut projelerde yedek parça şeklinde tedarik edilmektedir. Ziton ZP2 Serisi Adreslenebilir Yangın Alarm Kontrol Panelleri ZP2-F1-19 Analog Adreslenebilir Yangın Alarm Kontrol Paneli - 1 Loop, 127 Adres Kapasitesi, Grafik LCD Ekran, 2 Programlanabilir Sesli Alarm Çıkışı, Güç Kaynağı ve Akü Şarj Ünitesi ile birlikte - Büyük Kabin, Türkçe Menü ZP2-F1-S-19 Analog Adreslenebilir Yangın Alarm Kontrol Paneli - 1 Loop, 127 Adres Kapasitesi, Grafik LCD Ekran, 2 Programlanabilir Sesli Alarm Çıkışı, Güç Kaynağı ve Akü Şarj Ünitesi ile birlikte- Küçük Kabin, Türkçe Menü ZP2-F2-19 Analog Adreslenebilir Yangın Alarm Kontrol Paneli - 2 Loop, 254 Adres Kapasitesi, Grafik LCD Ekran, 2 Programlanabilir Sesli Alarm Çıkışı, Güç Kaynağı ve Akü Şarj Ünitesi ile birlikte - Büyük Kabin, Türkçe Menü ZP2-F4-19 Analog Adreslenebilir Yangın Alarm Kontrol Paneli - 4loop , 508 Adres Kapasitesi, Grafik LCD Ekran, 2 Programlanabilir Sesli Alarm Çıkışı, Güç Kaynağı ve Akü Şarj Ünitesi ile birlikte - Büyük Kabin, Türkçe Menü Ziton ZP Serisi Kontrol Panelleri için Giriş/Çıkış Opsiyon Kartları 2010-2-NB ZP2 Analog Adreslenebilir Yangın Alarm Panelleri için Network Kartı ZP2-LB ZP2-F2-S için Genişletme Kartı, 2 Loop, 254 Adres Kapasitesi, 4 Programlanabilir Sesli Alarm Çıkışı ZP2-ZI-20 ZP2 Paneller için Zone LED Göstergesi - 20 zon için ZP2-ZI-24 ZP2-S Paneller için Zone LED Göstergesi - 24 zon için ZP2-ZI-40 ZP2 Paneller için Zone LED Göstergesi - 40 zon için 2010-2-232-KIT ZP2 Panelleri için RS232 Kit ( Yazıcı Bağlantısı için Kullanılmaktadır.) Ziton ZP2 Serisi Kontrol Panelleri için Grafik İzleme Yazılımı ve Lisanslar ATS8600 Grafik İzleme ve Kontrol Yazılımı, Başlangıç Paketi: maksimum 2 cihaz için ATS8605 Genişletme Lisansı (ATS8600 için) ATS8610 Grafik İzleme ve Kontrol Yazılımı, Business Paketi: maksimum 25 cihaz için ATS8640 Genişletme Lisansı (ATS8645 Eklenebilmesi için) ATS8645 İlave Yazılım (ilave edilecek ZP2 Panel Sayısı Kadar Kullanılmalıdır.) 2010-2-PAK-900 ZP2 Paneller için Apollo Driver 2010-2-PAK-NET128 Ziton Network Genişletme Lisansı - 32 nodes / 128 loops 2010-2-PAK-NET256 Ziton Network Genişletme Lisansı - 64 nodes / 256 loops 2010-2-PAK-RMBN ZP2 Panelleri için Haberleşme Arabirim Lisansı - BACnet IP 2010-2-PAK-RMMB ZP2 Panelleri için Haberleşme Arabirim Lisansı - Modbus IP 2010-2-PAK-RMSDK Adreslenebilir Yangın Panel Aksesuarı, Uzak Kontrol ve IP üzerinden SDK Paylaşımı Tüm Türkiye Geneli UTC Ziton Yangın Algılama ve Alarm Panelleri Platin Teknoloji'de .

Solo 365 Duman Dedektörü Test kiti Solo A10 Smoke Detector Test Aerosol Solo-365 solo 365 duman dedektörü teti s Solo-365 kartuş solo 365 test ekipmanları kartuşu Solo-365 test ekipmanı solo 365 test ekipmanı iç detay Solo-365 solo 365 duman dedektörü teti s 1/3 proximity sensor Automatic smoke generation as the detector enters and exits the chamber Consumables Compartment Neatly accommodates all consumables for easy replacement Delayed Test Perfect for testing non-chamber aspirating systems or detectors Clean Chamber and Cell Allows easy viewing of the detector and rapid removal of smoke after testing LED lantern Automatically illuminates when light levels drop, allowing easy alignment with the detector Status LEDs Provides notification of unit mode status All fire detection systems approved by smoke detector manufacturers Solo A10 is preferred by professionals for fire detector testing, thanks to its structure similar to real fire smoke.