Site Search Results

Islak hacim wc banyo acil ipli panik alarm sistemi Disabled Toilet Rope Emergency Call Device The emergency call apparatus in accessible toilets created for barrier-free living is specially designed and manufactured for the project and can be operated by pulling a rope, so that it can be reached from the toilet bowl or when falling on the ground. The emergency call apparatus consists of 2 parts. 1. rope button: hanging from the ceiling on both sides of the toilet, with an average height of 75 cm from the floor and a gap of 60-70 cm between them. 2. Emergency call rope: It is positioned on all walls of the toilet at a height of 30 cm to 50 cm from the floor. The roped emergency call button and apparatus to be built on the walls of the toilet are intended to enable people who fall down while using the toilet due to illness or other reasons to reach them from any side of the toilet. Who Should Respond to a Rope Call Button Alarm? In case of a possible panic, the alarm will be activated by using the rope call. While environmental assistance can be provided with an active warning on the door, in businesses with 24/7 security service, it must be conveyed to the security guards with an audible and visual warning. The security guards will quickly coordinate the emergency response with the medical team. How Should Rope Calls Be Used in Areas Where There Are No Health & Safety Officers? It can be used in public areas to provide a warning with sound and light that can be heard outside the wet area and with a warning text indicating the nature of the alarm. How Should the Rope Call Panic Button Be Used at Home? By integrating with an alarm system, effective use will be ensured by ensuring that alarm information is sent to the call center or household in the form of messages, etc. in case of a possible alarm. FOR OUR OTHER ELECTRONIC ACCESSIBILITY SOLUTIONS Disabled Toilet Corded Emergency Panic Button and Call Appliance Application Examples

otomobil ve tüm motorlu araçların anahtarlarının yönetimi için saklama kutusu. Arabanın anahtarı kayboldu sorununa çözüm Automotive Key Management Solutions Supra indigo ® KeyBox key storage boxes: For the safe storage of keys that cause problems in all businesses such as logistics, maintenance, repair, second hand, service, sales, etc.in the automotive sector, to access them quickly when necessary and to prevent workforce losses that will occur as a result of momentary key losses. offers a solution. Key storage boxes are made of special aviation aluminum alloy and are durable in construction. In this way, it can be kept in the box on the vehicle, regardless of seasonal conditions and day or night. Fast secure key management can be provided with the encrypted key system specially created for the enterprise. In vehicles with new generation keyless operation feature, it is necessary to disable the feature in such vehicles because the key must be kept away from a certain distance in order to lock it, or to use new generation models produced for such keys. The solution for such vehicle keys is the max series. A special area inside the storage box ensures that the key is magnetically protected and prevents the doors from being opened even in the storage box hung on the vehicle glass. Automotive key storage boxes are ultra lightweight and have suitable storage capacity for automobile keys. Storage solutions for automobile keys Oversized vehicle key box Car Keybox

to communicate with platinum technology experts Contact Platin Teknolojik Yapı Sist ve İnş San Tic Ltd Şti Abdurrahman Nafiz Gürman District General Ali Rıza Gürcan Cd. No: 3/2, 34173 Merter / Gungoren / Istanbul, TURKEY info@platinteknoloji.com (+90) 212 489 15 20 (+90) 530 520 07 57 Contact Form Send Thank you for submitting!

akıllı direk ile solar güvenlik , panik alarm , kamera , anons , intercom, reklam ve belediyecilik çözümleri Smart, Environmental, Safe Pole It is time to switch from classic poles where lighting is provided in the streets and advertising postings are hung on some central areas, to smart poles. So what is there in the smart pole; Solar Led Armature LIGHTING for the main task of lighting Wi-Fi INTERNET to provide internet connection around Next generation smart cameras for security. Traffic analysis according to pole position, Social incident, Face recognition, Panic analysis, Perimeter security, Speed violation, Lane violation, Pedestrian protection etc. CAMERA Environmental data analysis with environmental data analysis software with temperature, rain, wind, air quality sensors. ENVIRONMENT Intelligent direct emergency security point SECURITY to quickly access security forces in case of possible emergency with panic button Voice and video conversation with security forces in case of emergency with intercom. COMMUNICATION In addition to generating revenue for municipalities, the body of the pole and the advertising areas on it will also provide public announcements to be shared effectively and instantly. ADVERTISEMENT With the environmentally friendly energy obtained from the solar panel, the charging station of the disabled vehicles, electric bicycles, scoters, etc. ENVIRONMENTAL ENERGY Charging station for mobile devices such as phones, tablets, etc. EMERGENCY It creates high comfort areas on streets, streets, parks, gardens and beaches with new generation smart, environmentally friendly and safe municipal applications. As you provide Lighting with a smart pole, you also provide WIFI for Internet access, analyze meteorological and environmental data. In emergencies, you reach the security forces and provide audio and video calls. Around the pole can be used as a safe area in case of emergency, you can broadcast social messages on the screens on it. With the energy obtained from the solar panel on it, you can become a charging point for environmentally friendly vehicles. You can run integrated advertising scenarios with the cameras on it. It will be an effective service point for municipalities providing local government and will be a solution that will generate a significant income.

acil durumlarda güvenlik ve sağlık birimlerine hızlıca bilgi aktarılması için panik alarm acil durum tıbbi yardım müdahale butonu ve haberleşme Panic Button Emergency Assistance System Panik Buton Acil Durum Yardım Sistemi: Görüntü Panic alarm, emergency medical response button and communication systems are installed in industrial facilities to quickly transmit information to security and health units in possible emergencies. Established panic alarm buttons are implemented in accordance with the existing infrastructure without requiring any modifications. The security risks of individuals and especially children living in metropolitan cities are increasing day by day. Due to the increasing risks, children are the most affected by the increasingly decreasing life comfort. Unfortunately, the right to have childish fun in playgrounds, sports and walking areas, picnic areas is not possible due to risks. We are developing projects in our country to ensure the safety of citizens of all ages. We are positioning additional emergency buttons to the camera system in running tracks, urban forests, playgrounds, children's playgrounds. With this application, you can reach the security guard 24/7 by pressing the panic button and ask for help. While the security guard who has reached the call talks with the person requesting help by voice and video, on the other hand, he can observe the surroundings with the cameras in the environment. can analyze the risk in detail. It can activate sound and light alerts positioned in the field to drive away the suspect. With these applications that we have developed with public institutions and especially municipalities, a safer area is created by ensuring that children have fun and play games in the parks in a safer manner. With the security center that can be accessed directly with the panic button, needs such as health assistance, police, police, fire brigade, etc. can be controlled from a single center. Quick intervention in health risks such as falls, fainting, etc. Quick intervention in child abduction and disappearance risks Quick response to the risks of substance addicts Prevention of all kinds of abuse, harassment, etc. Batting, fighting and preventing all kinds of incidents Prevention of theft, snatching and extortion The emergency phone can be easily integrated into an environment with the existing telephony infrastructure. Any analog exchange can be connected to the GSM network powerhouse or directly to a landline (PSTN). For example, to control the door lock, while the extra switch that comes with a single integrated intercom can also be added to control other devices. The integrated amplifier comes standard as well as a tamper switch connection option on the current security exchange. Simple programming is provided that will guide you through adjusting parameters directly from your phone, without the need to use a voice menu site or a PC. For All Panic Alarm Button Alternatives Panik Buton Acil Durum Yardım Sistemi: Product

Flood Detector Detection and Alarm Systems" Flood and Moisture Detection, Alarm Systems Thanks to this system applied to system rooms, cash registers, storage areas and places affected by water and moisture, the system will transfer information to the users who will activate the water discharge engine, heating system, ventilation system as required by the scenario in case of moisture or water formation. Flood detection and alarm system smartphone apps pop up message according to the demands. can send mail and sms. You can also keep all information in the event memory and report it. With the smart phone application, you can manage the system, report it and receive instant notifications. Flood risk in multi-storey buildings: Flood risks in mechanical areas: Due to the creation of mechanical areas in multi-storey buildings in the middle and upper floors of the building, possible leaks in installations containing water, such as heating, cooling, etc., pose serious risks on the floor and below the floor with water leakage. It offers solutions that you can follow instantly. In-floor water and moisture risks: In multi-storey buildings, we recommend the use of water-moisture detection solutions in suspended ceilings and under raised floors in order to detect risks early in order to prevent the problem from affecting the relevant floor and downstairs neighbors in possible installation-induced flooding within the floor. Sensors used for water and moisture detection in floor areas can be point type or effective detection can be made with textile-based nano technology spread type sensors. Sıvı Seviye Sensörü Tank ve Depo Sıvı Seviyesi Ölçüm Çözümleri

Mobil Araç Tipi Sigara Dumanı Algılama ve Alarm  Sistemi Mobile Vehicle Type Cigarette Smoke Detection and Alarm System How does this smell occur when there is a smoking ban in the vehicle. Of course, by smoking, if the windows are open, if the ventilation is operated, if the perfume is sprayed, the smell of tobacco smoke penetrates the tissues of the vehicle. Rental Cars, Company vehicles, Common use pool vehicles and Vehicles in the Fleet Our Problem is Cigarette Smell. The smell of cigarette smoke heard in the vehicle is called third-hand smoke. What is it? Third-hand smoke: It is the smoke that affects people entering a place where smoking was previously smoked, although there was no smoking in the vehicle. It has been scientifically proven that the smoke penetrating into the clothes, skin and hair of smokers, as well as on items such as interiors, seats, mats, can affect the health of other people using the vehicle even if the environment is ventilated. Solution It is an in-vehicle cigarette, tobacco smoke detection and reporting system. Even if he smokes a cigarette, instant information comes to you instantly and you can return to the past and report. What is Mobile Measurement? With the cigarette smoke sensor installed in the vehicle, it is our service that can continuously measure and keep the ambient conditions under control, instantly transmits the measurement values to the Data Center over the internet and warns when the specified values are exceeded. With this service, your measured values are recorded retrospectively and can be reported instantly. What Does Mobile Measurement Offer You? In-vehicle cigarette smoke allows you to follow the environment values automatically and in real time with a tobacco detector. In case of cigarette smoke detection, it notifies you via alarm, e-mail, sms and application on the mobile device. Alert values, type and frequency are easily adjusted. Mobile Measurement service is provided from Turkey's first highly equipped Data Center. Your data is stored in areas with high security standards. FEATURES Mobile Cigarette Smoke Meter consists of a device and sensor / sensors The devices are GSM connected. Sensors are cable structure. Your instantaneous measured values are saved on the Mobile Data Center in an immutable and indelible form. The ambient condition information of your device is stored free of charge for 1 year. You can configure variables such as the threshold intervals for which your device will warn, how long / frequency and with which method it will be warned after the threshold violation, via the web portal. By logging into the system via the web page where you can track your device, you can get historical daily / weekly / monthly or desired time interval reports. In what types of vehicles can I use the Mobile Smoke Measurement service? Rental Cars Fleet vehicles Company Vehicles Urban Minibus Intercity Bus Truck, Light Truck, Tow Truck Ambulance, Firefighter, Safety vehicles Mobile work machines You can reach all our cigarette smoke detection and alarm solutions here. Tüm Sigara Dumanı Algılama ve Alarm Çözümlerimize Buradan Ulaşabilirsiniz

FM 200 Gas Automatic Extinguishing Systems FM 200 Gas Automatic Extinguishing Systems New generation automatic fire extinguishing solutions for valuable and non-risky areas, The electronic system detects the fire. FM200 gas is discharged to the environment, It quickly destroys oxygen. The burning stops. Simple fast secure FM-200 is one of the systems that are accepted in the world and used in many projects to protect the world's most critical and irreplaceable assets, and is respected worldwide for its performance in projects and tests. Automatic gas extinguishing systems using FM-200 gas are used at hundreds of thousands of different points. Many fire suppression systems can cause significant damage to fire extinguishing processes and even destroy protected areas. FM 200 extinguishing systems should be used to protect valuable places against possible fires and to prevent damage caused by other extinguishing systems. Fm 200 extinguishing systems do not harm people and the area they protect. In the event of a possible fire, it distributes the environment quickly and cleanly and fulfills its duty without leaving oily residue, particles or water behind. FM-200 stops fires quickly by suppressing the oxygen in the environment. FM-200 Advantages: Stopping electrical fires that will cause significant damage in as short as 10 seconds provides the fastest fire protection of private areas. Since the fire is quickly taken under control, it provides less damage, lower repair costs and an extra fire measure for business information, documents and business processes. FM-200 can be used safely in places where people are present. There are superior differences in FM-200® fire suppression systems in applications, FM-200 requires less cylinders (storage space), pressurized with nitrogen and pressurized cylinders are stored. It can take up seven times less storage space than conventional systems. FM200 Gas System Features: - It is colorless, odorless and non-conductive. - It does not damage ozone. Its atmospheric life is 31-42 years. - It extinguishes physically. - Does not leave any residue after extinguishing, does not require cleaning. - It can be used safely in places where people are present. - It is the most widely used Halon 1301 alternative. - It is economical. - Takes up little space. Discharge time is 10 seconds. FM200 Gas System Components: It consists of FM 200 chemical agent, mainly four components and accessories of these components. 1. FM-200 Components: The cylinder in which the FM-200 gas is stored consists of the cylinder protector and the FM-200 discharge nozzle. 2. Control Panel: It is the brain of the system, it is used to view, monitor and activate the detection system and equipment. 3. Detection and Warning Elements: Detection detectors and accessories in the system, sounders that give audible and visual warnings, are the external equipment of the system that fulfill the function of eyes and ears. System Design and Operation: The amount of gas required for the volume to be protected by FM-200, vapor is calculated according to NFPA 12 and ISO 14520 standards and rules, FM 200 tube suitable for the gas amount is selected, FM-200 discharge nozzles are placed at the required points in the room installed with a cross zone fire detection system, With the activation of the smoke detectors, current is sent from the panel to the solenoid valve of the FM-200 system, All FM-200 gas is evacuated to the protected volume within 10 seconds at most. System operation can be done automatically or manually. Examples of Wide Usage Areas IT / Server Rooms Electrical Rooms Data Centers Safes · Museums Art Galleries Archive Facilities

We offer technological solutions to your business's security, fire, worker safety and disabled accessibility problems. ANSWERS Platin Teknoloji offers solutions across Turkey with the world's leading brands for sectoral risks and security problems specific to projects. Maritime and Marine Services Historical Artifact Restoration Solutions Industrial Facilities Hospitals and Healthcare institutions Hospitals and Healthcare institutions Business Centers and Plazas Defense industry Banking and finance Automotive Automotive Schools and Educational Institutions Solar power plants Merchandising and Retail Mining Schools and Educational Institutions Solar power plants Merchandising and Retail Mining

We offer videowall solutions Video Wall Systems Platinum Technology offers Video Wall solutions for uninterrupted and detailed monitoring of images suitable for operational needs in television studios, camera control centers, power plants, command and control centers. Advertising and Promotional Video Wall Applications: With Platinum Technology Video Wall Applications, it is very easy to manage its content. With UEC Series displays, there is no need to search for large areas and serious modifications to find the required space for a 29.9 mm deep yet thin video wall and (1.18) video wall. These ultra-thin displays can be mounted with little protrusion from the wall to accommodate your tough work environment and are designed to take up less space. With wide optional mounting accessories suitable for many mounting areas, slim and light design features, platinum technology video Walls will be the solution for easy installation even in the narrowest areas of your organization. We offer narrow bezel products to provide unobtrusive images and a wide field of view on close and continuous digital displays. Using the embedded content management solution, Platinum Technology Samsung Smart Signage Platform (SSSP). It eliminates the need for a Video Wall to purchase an additional PC or media player for each display. It can play content created with a powerful system-on-chip (SoC) operating, SSSP VideoWall authoring program or console applications. Supports MagicInfo VideoWall application, Embedded MagicInfo ™ VideoWall S Player provides easy viewing of video walls up to 4 x 4, providing content managers with powerful control over video walls of various sizes and configurations for seamless viewing. Please contact Platin Teknoloji Video Wall engineers for alternative 2x2 4x4 3x3 4x2 etc. solutions.! Corporate IPTV solutions HOTEL IP TV SOLUTIONS Our Ip TV solutions developed for hotels Designed for modern hotels that prioritize superior functionality and operational efficiency, the Samsung HD690 Series SMART Hospitality Screens offer an excellent TV experience thanks to a range of comfortable, built-in TV management features and functions for guest satisfaction. IT managers can remotely control the TV and manage content in each room in one simple step with the IP-based LYNK SINC 3.0, using a hotel's existing IP infrastructure. These features allow hotel staff to make changes without entering each hotel room, eliminating high maintenance costs and the need to purchase additional STBs. Newly updated to include value-added features such as an upgraded IP-based LYNK SIC and a comfortable Bluetooth music player, the HD690 Series displays combine superior entertainment and efficiency. The upgraded LYNK SINC solution simplifies the process of verifying the entrance, exit and network status of each room, even generating a welcome message on the screen when a guest enters the room. Hotel staff can select a TV or a group of TVs and remotely program during work / leave hours, even update firmware and reboot. LYNK SINC's new function IPTV Standalone Solution can be used without SINC content with a free license. With this function, hotel staff can control the content by editing the IPTV channel and copying the channel list to a USB device and then transferring it to any TV. In this way, administrators can effectively present IP TV to their guests without purchasing additional solutions. Offer your guests interactive entertainment with a wide range of built-in applications. H. Browser offers the superior home entertainment and special content management that today's hotel guests have hoped for, along with interactive web services. With H. Browser, hotels do not have to purchase, install and maintain additional equipment such as VoD set-top boxes (STBs). The IP-based open platform H. Browser allows System Integrators (SIs) to provide fully custom web browser solutions that offer superior interactive services and features for both free and VoD content. H. Since the browser is based on Internet programming languages such as HTML5 and Java Script®, Sls can easily develop and use durable and custom hotel solutions. Solution development is made possible by Samsung technical support, Samsung's advanced display hardware and Samsung Sls collaboration. Present a wide range of content to your guests with the advanced Home Screen Menu, a low-cost solution that does not require network infrastructure. New enhanced features allow hotels to display their logo and use video and image playback features previously offered as a single function. Hotels can easily implement enhanced features without the need for a network by replicating via USB in factory mode. Guests can conveniently view resources such as time, date and hotel information, and access frequently used TV features in user mode. The Customizable Home Screen Menu reduces the cost burden of consumer TV for hotels that have to buy Hospitality TVs that otherwise offer built-in solutions. Increase guest entertainment options with comfortable wireless connectivity HOSPITAL IPTV SOLUTIONS Our Ip TV solutions developed for hospital applications Designed for modern hotels that prioritize superior functionality and operational efficiency, Samsung SMART hospital Displays offer an excellent TV experience thanks to a range of comfortable, built-in TV management features and functions for guest satisfaction. IT managers can remotely control the TV and manage content in each room in one simple step with the IP-based LYNK SINC 3.0, using a hotel's existing IP infrastructure. These features allow hotel staff to make changes without entering each hotel room, eliminating high maintenance costs and the need to purchase additional STBs. Newly updated to include value-added features such as an upgraded IP-based LYNK SIC and a comfortable Bluetooth music player, the HD690 Series displays combine superior entertainment and efficiency.

smoke sabre duman dedektörü test sprey tüpü ile etkin yangın algılama dedektör testi Solo A10 Smoke Detector Test Aerosol All fire detection systems approved by smoke detector manufacturers Solo A10 is preferred by professionals for fire detector testing, thanks to its structure similar to real fire smoke.

eaton yangın algılama alarm ve ihbar sistemleri cooper EATON Fire Detection, Warning and Alarm Systems Eaton offers you its expertise in the development of fire alarm systems based on strong heritage from names such as Cooper, Menvier, JSB, Nugelec and Fulleon. Eaton works with industry-leading organizations as well as its customers to meet the highest standards; It has increased its recognition globally with its products that you can see in many places such as stadiums, multi-storey buildings, government buildings, airports, bus terminals, train stations, hospitals, nursing homes, industrial facilities, retail outlets and social facilities. Eaton; produces market leading addressable and conventional fire alarm systems that are compatible with specific application requirements, efficient, user-friendly and can be configured according to specific applications. Eaton offers complete complete fire system solutions and manufactures all of its products. You can safely use it as a completely complete fire detection and alarm system, as all system components are fully compatible with each other. All equipment complies with international standards and this conformity is certified. It is absolutely vital that all elements of the fire detection system are fully compatible with each other. To support this philosophy, our large multidisciplinary research and development team based in Doncaster is responsible for integrating the latest technology into Eaton's Fire Systems Business range. Eaton's fire systems business products have international approvals, the CF3000 and CF1000 series are Europe's first touchscreen analog fire panels available in 27 languages at your fingertips. Cooper Eaton Fire detection systems Turkey-wide solutions at Platin Teknoloji. Eaton Philosophy Investing in people Partnering with our clients to develop open, long-term relationships Have an unpretentious, open and honest approach to the business Continuous investment in research and development Investing in production facilities to keep them at world standards To produce products that fully comply with the standards Working environmentally - in the products we design and the facilities we make them To have high ethical standards eaton complies with standards. EN 54 CF1100VDS Electronic Addressable Fire Alarm Control Panel - 1 Loop, 200 Address Capacity, Touchscreen LCD Display, 16 Zone LEDs, 2 Siren Outputs, Power Supply CF1200VDS Electronic Addressable Fire Alarm Control Panel - 2 Loops, 400 Address Capacity, Touchscreen LCD Display, 16 Zone LEDs, 2 Siren Outputs, Power Supply CF2000GCPD Electronic Addressable Fire Alarm Control Panel - 2 Loops, 400 Address Capacity, LCD Display, 32 Zone LEDs, 2 Siren Outputs, Power Supply, Non-Networkable CF30002G Electronic Addressable Fire Alarm Control Panel - 2 Loops, 400 Address Capacity, Touchscreen LCD Display, 96 Zone LEDs, 4 Siren Outputs, Power Supply CF30004G Electronic Addressable Fire Alarm Control Panel - 4 Loops, 800 Address Capacity, Touchscreen LCD Display, 96 Zone LEDs, 4 Siren Outputs, Power Supply CTPR3000 Full Function Repeater Panel, LCD Touch Screen, Network Connection with CF3000 and CF1000 Series Control Panels CAP320-EU Electronic Addressable Optical Smoke Detector, Internal Short Circuit Isolator CAPT340 Electronic Addressable Combined Optical Smoke and Heat Detector with Internal Short Circuit Isolator CAH330-EU Electronic Addressable Constant Temperature and Temperature Rise Rate Detector with Internal Short Circuit Isolator CBG370S Electronic Addressable Fire Alarm Button with Internal Short Circuit Isolator CBG370WP Electronic Addressable Manual Call Point with Internal Short Circuit Isolator, Outdoor Type IP65 CSI350 Loop T-Connection Module CIO351 Electronic Addressable, Independently Programmable 3 Channel Input / Output Module with Internal Short Circuit Isolator (Reset during reset) CIO351S Electronic Addressable, Independently Programmable 3 Channel Input / Output Module with Internal Short Circuit Isolator (Resets during Alarm Silencing) CFC301 3-Channel Technical Input / Output Interface Unit CZMU352 Electronic Addressable Zone Supervision Module with Internal Short Circuit Isolator CMIO353 Electronic Addressable, Single Channel Input / Output Module, 230V AC Relay Output, with Internal Short Circuit Isolator CSC354 Electronic Addressable, Independently Programmable 4 Output Sounder Control Module, Internal Short Circuit Isolator, Power Supply CAS380 Electronic Addressable Socket Type Electronic Siren, 95dB, With Internal Short Circuit Isolator CASBB384 Electronic Addressable Socket Type Flasher Electronic Siren With Internal Short Circuit Isolator

Hırsız alarm ve güvenlik otomasyon sistemleri Burglar Alarm and Security Systems Platinum technology offers an end to new generation security risks Security system, Burglar detection, alarm and notification system solutions. It establishes systems against theft and sabotage. These systems, which are needed today, are the definitive solution to robberies and unauthorized access. The possibility of false alarms of these systems is very low and they provide the opportunity to intervene in the system only with the correct password. There are products and systems with different detection features in security systems according to the purpose and protection system. Security Automation Systems: The alarm system, in which the burglar alarm system and other electronic systems are integrated, are the systems in which the security risks of large-scale areas such as Shopping malls, Plaza, Headquarters, Factory, Campus etc. Burglar Alarm Systems: These are systems established to monitor, deter and warn uncontrolled access to areas such as workplaces, houses, offices etc. Generally used products in systems; Alarm panels, PIR Motion detectors, Beam detectors, optical smoke detectors, heat detectors, Gas detectors, Glass break detectors, Impact sensors, Beam detectors, Phone seekers, GSM seekers, Internal and external sirens, Magnetic contacts. Alarm panels: They are of 2 types, which can be connected to the center (with communicator) and local (without a communicator). The choice of panel capacity is determined by the size of the project. If the area to be protected is large and the number of detectors is large, the number of zones of the panel should be considered. System and panel control is possible with a keypad. All programming is done from this password unit. The panels used are microprocessor controlled and have a wide variety of features. Since the alarm panels are battery powered, they are not affected by power outages and have extra protection against sabotage. Since the panel includes a communicator, it can continuously send digital information over the telephone line. Thus, it is possible to monitor the operation and control of the system 24 hours from the center to which it is connected. By providing web connection of new generation alarm panels, it is possible to control, monitor and monitor instantly, remotely and closely, from smart phones. PIR Detectors: It is the type of detector that detects the movements of creatures entering the protection area without permission and instantly sends information to the panel. It has a wide variety of alternatives according to its place of use and characteristics. Animal detection, optical, wireless are among these options. Optical Smoke Detectors: Detector type that detects the smoke formed in the protection area and sends information to the panel. Heat Detectors: Detector type that senses the heat increase in the protection area and sends information to the panel. Gas Detectors: The type of detector that detects the gas leak occurring in the protection area and sends information to the panel. Glass Break Detectors: The type of detector that detects the sound of glass breakage in the protection area and sends information to the panel. Impact sensors: The type of detector that senses the vibration in the protection area, where it is applied and sends information to the panel. Beam detectors: The type of detector that is applied to windows in the protected area and sends information to the panel by detecting when intrusion occurs. Phone Dialer: These are the modules designed to call other different phone numbers starting from the first number stored in the memory and send audible alerts when an alarm occurs in the protection area. GSM Dialer: It is a product that provides reliable communication, designed to be used in areas with no telephone lines, interruptions or problems. External Sirens: These are sirens designed to be used in outdoor environments, compatible with all security systems, resistant to all weather conditions and impacts, technical equipment to meet all your needs in your security systems and deterrent high sound power. Indoor Sirens: These are sounders with high sound power, designed for use in indoor environments, compatible with all security systems. Magnetic Contacts: It is the product that informs the alarm panel that doors and windows, which are usually attached to open and close surfaces such as doors and windows in the protection area, have been opened without permission. All alarm systems can be connected to the alarm control center via GSM line, terrestrial line and / or ADSL modem, and all alarm-fault information can be monitored remotely through this center. Platin Teknoloji identifies the technological security needs of its customers and produces solutions from GE UTC CADDX, TEXECOM, AJAX, DSC, PARADOX, HONEYWELL Series products. Limited stocks. Our warehouse is available WIRELESS ALARM SET CAMPAIGN

audible light emergency exit routing products integration and connectivity solutions for accessibility applications in existing buildings What is Audible Lighted Emergency Exit Routing? What is the IP address of the audible light emergency exit routing system requested with the 77.185.1017 pose explanations, which have emerged with the increasing accessibility applications in recent years? Today, in many buildings, when an emergency occurs such as fire, flood, earthquake, etc. , alarm sirens, flashers, horns placed in various parts of the building work in as wide an area as possible at the same time to warn people against a sudden danger. There are exit signs and exit signs used to direct the users inside the building to the emergency exit. However, in a smoke-filled environment, emergency signs created by visual guidance may be less pronounced or completely ineffective. Building occupants may not be familiar with the building and associated emergency exit routes, but they can still access emergency exits somehow with directions and signs. So, how will people in panic and shock, hearing and visually impaired individuals reach the emergency exits without help? For visually impaired people to evacuate the building quickly without additional support during the evacuation processes of buildings, conventional emergency direction luminaires and signs will not be sufficient and they will experience serious difficulties. Are there any signs? Solutions that will answer the question should be applied. Disabled audible light guiding luminaires are new generation emergency exit evacuation routing solutions. In short, you can define it as a sound exit armature. The engineering application of directional audio technology faces some problems. Commonly used emergency fire alarm sounds cause confusion for building occupants. Users in buildings may not know what to do when they hear the sound. For this reason, there is a need to clarify escapes in addition to the voice alarm and siren. Users who try to go out into the corridor and steer towards the escape stairs after the siren sound at which the emergency warning is made, will proceed confidently to hear the announcements that they will understand that they can reach the fire stairs for emergency escape when they approach the audible and illuminated emergency exit direction luminaire, when they move in the direction of the sound, and that they are approaching with an increasingly clear sound announcement. This message will enable them to move quickly and safely without the need for visual guidance and evacuation sign systems without having knowledge of the Building. Conventional fire alarm and voice alarm systems both emit an audio signal when an emergency occurs in the building. Disabled emergency exit guidance system with audible light is an additional evacuation aid; however, it is not a system that replaces the above-mentioned fire alarm and voice alarm system. Disabled emergency exit sound and light announcement fixtures should be placed above emergency exit doors and in complex corridor turns. However, emergency audio and light guidance products only on fire escape stairs and emergency exit doors may not provide enough directional sound to reach most of the users. In addition, there may be more than one exit in large, open and large buildings, but the sounds of more than one disabled audible lighted emergency exit routing product may interfere with each other and create confusion. For this reason, detailed project work should be done for disabled emergency sound and light guidance device equipment placement and integrated with the fire scenario. Considering this information It is possible to reach the fire doors and escapes with audible and illuminated announcements from the emergency exit doors. In an emergency, the environment can be noisy due to siren sounds. The emergency voice guidance warning sound should be at least 15 dB lower than the ambient sound level. Despite the ambient noise, it can be heard easily. Orientation can be determined It will make it easier to reach the exit points with the increasing sound level as you get closer. How to Integrate Sound Lighted Emergency Exit Guidance System in Existing Buildings? The fire detection system, which is the backbone of the evacuation in case of possible fire, earthquake, etc. in the buildings, will form the backbone of the products for directing the disabled with sound and light to the emergency exit and will enable them to be managed through the central system. In this case, we will encounter 2 different fire detection systems in the existing buildings. What are these systems? 1- Conventional Fire Detection Systems: The sensing panel used in the system consists of the regions where the sensing elements are connected. The number of zones is related to the capacity of the panel. 20 detectors can be connected to each zone. The panel also has inputs and outputs to connect fire alarm buttons and sirens. When any detector detects or the fire alarm button is pressed, a warning signal comes from the zone where the detection element belongs to the panel. For example: If any detector detects in a region where 20 detectors are connected, a warning will come from that region. (But it will not be clear from which detector the warning came.) 2- Addressable Fire Detection Systems: In addressable systems, there are loop lines to which the sensing elements are connected. The number of loop lines and the wiring distance depend on the panel used. 125-127 addressable elements (detector, button, input module, output module, addressable siren) can be connected to a loop line. The sensing elements in the loop can be divided into zones, and each sensing element can be individually detected by the panel thanks to the addressing software it contains. In other words, when any detector detects, the location of the detector can be determined individually on the panel or optionally on the PC where the projects of the building are loaded. Conventional systems and addressable systems are selected and dimensioned according to their application areas. Conventional elements are sufficient for systems with a small number of sensing elements and offer inexpensive solutions. How can we integrate sound and light emergency exit routing products into existing fire detection systems. 1. We can provide direct connection of conventional and addressable fire detection systems with the fire detection system by making a direct connection to the conventional siren lines that activate the sirens with 12-24 VDC at the time of alarm. With this connection, direct integration into the fire detection system is provided. There are solutions that can provide the same connection with a wireless transmitter that will receive information from the nearest siren line. You can control the control modules of the addressable fire detection systems and the emergency exit routing system devices with sound light and it will be possible to integrate them into the fire scenario. It is activated in possible emergencies and will be silent when disabled from the central system. There are products that can provide the same connection with a wireless transmitter that will receive information from the nearest loop line with the relay module. Sound and Light Emergency Exit Guidance System Product Selection Chart Sound and Light Emergency Exit Guidance System Frequently Asked Questions ? - HOW MUCH IS THE ANNOUNCEMENT TIME? - ANNOUNCEMENT WILL CONTINUE UNTIL THE ALARM TRIGGING THE SYSTEM CONTINUES. - CAN THE CONTENT OF THE ANNOUNCEMENT BE CHANGED? - STANDARD ANNOUNCEMENTS ON IT CAN BE REPLACED WITHOUT ADDITIONAL EQUIPMENT - WILL IT WORK IN ELECTRICITY FAILURE? - THE DEVICE WORKS CONTINUOUSLY FOR 24 HOURS IN ELECTRIC OUTPUT AND CAN MAKE 4 HOURS CONTINUOUS ANNOUNCEMENT. - WHAT IS THE INTENDED USE OF THE FLASHER ON IT? - EMERGENCY EXITS CAN BE PROVIDED FOR THE DISABLED WITH LIMITED VISION WITH FLASHERS COMPATIBLE WITH ''EN 54-23''. - IF A FIRE STARTS IN THE AREA TO BE evacuated, HOW DO WE AVOID PUTTING THE DISABLED PEOPLE AT RISK? -UP TO 20 SENSORS CAN BE CONNECTED TO THE DEVICE USING WIRED - WIRELESS DETECTOR INPUT. IN THIS WAY, THE SMOKE IN THE AREA IS PROVIDED TO BE DETECTED AND ANNOUNCEMENTS ARE ACTIVITIZED TO ENSURE EVOLUTION IS MADE FROM OTHER POINTS. FOR OUR DISABLED VOICE LIGHT GUIDANCE PRODUCTS

Dünyanın ilk ve etkin hava örneklemeli tip erken yangın algılama sisteminin mucidi  Vesda Xtralis Ürünleri Türkiye'de . Platin Teknoloji uzmanlığı ve ayrıcalığı ile  VESDA OSID New generation Beam Detector Revolutionizing very early warning smoke detection with VESDA, the company has reinvented smoke detection for outdoor areas with Outdoor Smoke Imaging Detection (OSID). OSID by Xtralis provides reliable, cost-effective smoke detection for open areas where fire detection presents unique challenges and very early warning is not always a priority. Solutions for all areas with complex high ceilings with the new generation Beam detector Using imaging technology based on the CMOS Imager, the OSID series offers fast setup and superior detection performance that cannot be achieved using a single photo receiver. A CMOS imager is equivalent to hundreds of thousands of photocells. Automatic setup reduces setup time from hours to minutes. CMOS imagers locate detection targets (Transmitter or Reflector) and lock onto it, eliminating building motion issues. The CMOS imager also allows to minimize drastically false alarms caused by foreign body ingress and sunlight saturation. In its simplest configuration, OSID-R (Reflector) uses a viewer and a reflector. It works according to the principle of dimming the light using infrared rays and performs intelligent analysis at the pixel level of its reflector, which offers superior performance. Power and connection occur only in the imager, and the OSID-R only requires a single standard reflector on the opposite wall (not a larger reflector the farther you go). Alongside this stepping model is OSID-DE (Double-ended), which uses a similar CMOS sensor with wired or battery-operated transmitter(s) roughly aligned on the opposite wall within the protected area. The transmitter sends both infrared and ultraviolet coded light signals to the imager. The innovative use of dual light frequencies in an open path device allows OSID-DE to distinguish between real smoke and other solid objects. It offers high resistance to sudden and temporary clouds of dust and vapor, significantly reducing false alarms. The OSID range of outdoor smoke detectors offers a great package for reliable smoke detection in large or open areas. Using CMOS imaging technology, OSID not only provides reliable smoke detection, but is designed for fast setup and reliable operation throughout the detector's lifetime. Installers no longer face lengthy and costly setup processes and callbacks; and end users are no longer bothered by annoying or false alarms about building movement; dust or beam interruption. OSID offers a reliable alternative to heat or flame detectors, which typically start much later in the fire development cycle. Osid Beam Detector Product Options Headunits Xtralis OSI-10 Imager 7° Horizontal, 4° Vertical Shield, min. 30m, max 150m range, use only with standard power emitter, 8mA@1xemitter, 10mA@7xemitter Xtralis OSI-90 Imager 80° Horizontal, 48° Vertical Protection, min. 6m, max 34m range (with standard powerful emitter), min. 12m, max 68m range (with high power emitter) Reflectives Xtralis OSE-SP-01 Standard Power Emitter with Internal Battery Xtralis OSE-SPW Standard Power Emitter, 24V DC External Powered Xtralis OSE-HPW High Power Emitter, External Power Input, 800mA@24V DC Xtralis OSE-HP-01 High Power Emitter with Internal Battery

Calectro   Havalandırma Kanalı Yangın Algılama  ve Alarm Teknolojisi  Türkiye 'de Calectro Flood and Moisture Detection Systems Calectro was founded in Gothenburg in 1969 by a young technician, Karl Johan Pettersen. The company was established as an agency company for suppliers in Switzerland and Denmark. Including program electronic thermostats, level controls, time relays etc. The main idea was to find customers with special needs and develop them in close cooperation with the customer. This quickly led to the development of the first electronic overfill protection approved for oil tanks. A completely new electronic freezer protection has also been developed through close contact with a number of control and regulatory companies. In the 1970s and 1980s the company expanded significantly, and in the late 1980s it was expanded to include its own development and production, including Calectro's offering. One-pipe smoke detector for the UG-1 ventilation system, which has become an instant success. Since then, Calectro has offered to develop quality products from accredited suppliers, as well as products developed specifically for its customers. 50 years after its inception, Calectro is a full-fledged technology and distribution company with dealers in many countries and a strong Swedish customer base. Perhaps the best known product is the Uniguard® single-pipe smoke detector, currently used by many project firms in the control and regulation industry in Turkey, Sweden and Europe. Water and Moisture Leak Detection Systems in Platinum Technology; Thanks to this system applied to system rooms, cash registers, storage areas and places affected by water and moisture, the system will activate the siren unit in case of moisture or water formation that may be a risk. According to the pre-prepared scenario, the water discharge engine will activate the heating system and the ventilation system. and if it occurs outside of working hours, it will transmit information by calling the users' phones. Flood detection and alarm system can send mail and sms according to the requests. You can also keep all information in the event memory and report it. With the smart phone application, you can manage the system, report it and receive instant notifications. You can reach Turkey-wide Calectro flood and moisture detection products and special prices for your projects from Platinum Technology. Digital Type Detection Systems - Equipment used - Water detection sensor - Humidity detection sensor - Control Panel - Siren - Telephone search device - Web connection module - SMS module Water Humidity and Leak Detection System Application Areas IT / Server system Rooms Electrical Rooms Heating Cooling centers Data Centers · Hotels Kitchen / Toilet & Vending Areas Hospitals Empty Complexes Supermarkets · Museums Art Galleries Archive Facilities smoke detection in ventilation ducts The purpose of smoke detection in Calectro ventilation ducts is to detect smoke in ventilation systems at an early stage and to send an alarm to the control unit when detected. They can then quickly implement countermeasures such as closing dampers and initiating forced ventilation to limit the spread of smoke. How does single tube smoke detection work in ducts? The system has an air probe (called a venturi tube) integrated control unit cf58d_3194 It is based on bb3b-136bad5cf58d_ (the Uniguard smoke detector is also available with an external control unit). The venturi tube delivers air from the duct to the detector housing installed outside the duct, where a smoke detector detects potential fire particles in the air. In the event of an alarm, the smoke detector sends a signal to the control unit via relays, which then closes the dampers, stops the fans / activates the siren and forwards the alarm to the automation center . The aerodynamic design of the enclosure and tube is crucial to the ability to detect small levels of smoke particles in the air at an early stage Advanced venturi tube technology Uniguard's patented venturi tube is equipped with aerodynamic flanges, the most efficient way to draw air from the depths of the entire ventilation duct and deliver it to the smoke detector. This facilitates the detection of flue gases even at small doses and low air velocities. The effect of the venturi tube has been measured and documented by external laboratories. Flow-optimized enclosure Uniguard's patented enclosure series (UG-3/4/5) has been specially designed using simulation software to achieve maximum flue gas concentration around the smoke detector. In combination with the venturi tube, the enclosures create unmatched sensing performance even at low air volumes. It also has an indicator for easy inspection of the airflow. Automatic sensitivity adjustment Uniguard's smoke detectors have a built-in, automatic sensitivity adjustment that measures the baseline value in airflow each day and compensates for possible changes in the system over time. This minimizes the risk of unwanted alarms and unnecessary maintenance. Led Status Indicator The Uniguard UG-3 version has both an alarm indicator on the smoke detector and LEDs on the back to make it easy to check the alarm status in confined spaces.

ACA ES 12 Ekonomik engelli sesli ve ışıklı acil çıkış kapısı yönlendirme anons armatürü ile acil durumda ses ve ışıkla yangın kaçış kapılarına yönlendirilmesi çözümleri. ACA ES 12 DISABLED SOUND LIGHT GUIDANCE ACA ES12 Voice and Light Announcement Emergency Exit Guidance System for Visually and Hearing Impaired People In public buildings, social and cultural areas, Port, Station, Station, Shopping areas, Stores, Bank, Post center, Market, etc.In case of fire or emergency people are directed to the exits with Emergency Exit signposts placed for evacuation of the building. In accordance with the regulation of accessibility from these buildings, it is necessary to ensure that the buildings are directed to the Emergency exit doors and evacuated from the building in a safe manner in case of fire or emergency. According to the architectural structure of the system buildings, the fire exit corridors and the areas where the fire doors are located, point-by-point announcement units are installed according to their architectural and constructional features and a direction-description announcement about the evacuation point is recorded. Audio descriptions should be concise '' Emergency exit is here '', '' Door is here '', '' Exit is here '' Voice and light announcement device and emergency announcement system are generally confused with each other. Voice alarm provides announcement to be heard at all points of the building The audible, illuminated emergency routing fixture, on the other hand, enables the emergency exit door to be reached point by point by following the sound with a sound announcement that increases as it approaches the door. What is Disabled Sound and Light Emergency Exit Guidance? How to Integrate Sound Lighted Emergency Exit Guidance System in Existing Buildings? For All Our Disabled Audio Light Guidance Products '' Trying to produce a sound that will suppress the sound of the emergency announcement and the sound of the siren will cause the sounds of the device used for emergency exit routing to be mixed with each other. '' It is the sound to be heard when approaching the desired door and the sounds of the doors do not interfere with each other. It provides the emergency exit evacuation by starting the direction directions with the point announcement with the command received from the alarm system or the emergency button, and continuing the point announcement and voice guidance repeatedly until the fire alarm system or emergency buttons return to their previous position, directing them to the nearest emergency exit doors in the building where the visually impaired are located. In buildings with more than one exit door or floors, the point disability emergency announcement units detect the smoke density in their area and direct them to the other floor or emergency exit doors with different announcements, preventing the visually impaired from entering the fire zone. Frequently asked question: What is the purpose of the flasher on the device conforming to the EN 54 standard? Notifying hearing-impaired individuals that an emergency has occurred To enable the hearing-impaired individual to reach the emergency exit door with the flasher light. Providing access to the door with the flasher light that creates violence that even individuals with low vision can see ACA ES12 Series disabled voice guiding fixture advantages: Direct connection can be made to the conventional siren line of all addressable, Conventional fire detection system brands, regardless of brand, EN54 compliant. Wired and wireless connection options that will provide easy application without modification in existing buildings, EN -54 compliance. Integrated battery and smart charging circuit for outage operation, Changeable and prioritized announcement options. Working in full compliance with the building fire scenario with 4 different sound recordings. Evacuation, evacuation through another door, prohibited passage, Fire scenario. Software that tracks battery and battery life and health status. Legal and uninterrupted communication with 868 mHz wireless connection frequency. Easy changeable sound recording, Live, from PC, etc.

Ziton Fire Detection Equipment in stock Leading manufacturer Carrier Fire Ziton Fire Detection , Warning ve Alarm Systems Ziton Fire Alarm Systems Features that Make a Difference; • Simple and convenient front fire control paneli and • Fast Ziton Fire detection system installation and configuration • Automatic fire scenarios and programming feature • Ability to undo recent changes • Offline programming of the fire panel and uploading the configuration file to the USB device • Preferential cards and modules that can be easily integrated into the Ziton fire detection panel. • Remote maintenance and fault detection of the fire alarm panel over TCP/IP • In case of power cuts yang panel standby time up to 72 hours • Graphical EN54 compliant LCD display with icon support • Ziton-specific language options that can be easily changed from the fire panel • Surface / flush * / 19” rack* mounting Superior performance Features from single control panel applications to applications requiring small/medium network Ziton fire detection and alarm systems, one of the leading brands of UTC Carrier Fire & Security; UTC Ziton is offered throughout Turkey with the widespread network of Platinum technology. In addressable systems, there are optical, heat and combined fire detection detectors, input and output modules, alarm buttons, addressable sirens that can be connected to the loop lines to which the detection elements are connected. The number of the loop line and the wiring distance depend on the panel used. 127 addressable fire detection equipment can be connected to each loop line. Sensing elements in the loop can be divided into software regions, and each sensing element can be individually perceived by the panel thanks to the addressing software it contains. In other words, when any detector detects, the location of the detector can be determined individually on the panel or on the pc where the projects of the building, which can be used optionally, are loaded. Conventional systems and addressable systems are selected and sized according to their application locations. Ziton, Kilsen, Aritech Series from UTC Carrier fire detection brands, Turkey-wide system solutions of high-tech equipment are provided by Platin Technology and distributors, engineers and technical teams with more than 20 years of project design and application experience in the sector. Fire Alarm Systems Distinctive Features ziton Simple and convenient front panel control Fast system setup and configuration Increased automatic programming feature • Undo last changes feature Offline programming and ability to upload configuration file to USB device Easily configurable preferred cards and modules Remote maintenance and error detection over TCP / IP Up to 72 hours of standby time Graphical EN54 compliant icon supported LCD display Easy to change language options Surface / flush * / 19 ”rack * mounting Superior performance from single panel applications to applications requiring small / medium sized networks Advantages of Ziton series addressable systems 1- In Interactive Addressable systems, clear information of the place where the alarm, malfunction etc. information comes from can be reached. In conventional systems, region (floor) information comes. The net location of the detector must be checked for the region. 2- In addressable systems, alarm, error, loss, malfunction and calibration information of the detectors are displayed on the panel as a point. 3- In addressable systems, 127 equipment can be operated on each cable line. In conventional systems, this number is limited to 20-25 detectors. 4- In addressable systems, in the problem of the wiring line, the system provides access to information about the location of the continuing problem. In conventional systems, the part after the line is completely disabled. 5- Equipments such as input module, output module, siren module etc. from addressed systems can operate over the loop line. In conventional systems, general alarm and error information can be received from the panel. 6- In addressable systems, wide range of alarm scenarios that will be activated in case of fire can be applied. In summary, it offers solutions in large and medium-scale projects with low infrastructure, operating and initial investment costs thanks to its modular structure and technology. Ziton ZP3 Series Network Control Panels ZP3 control panels have 1, 2 and 4 loop capacity ZP3 series fire alarm panels that can be networked with each other, each supporting 127 x XX addressable devices. Ziton ZP3 fire alarm panels are compatible with both ZX series algorithm based, interactive and ZP series analog addressable field elements. These panels also have interfaces to fulfill the necessary network communication for medium and large-scale systems, fiber-optic and IP-based communication facilities. Repeater panels compatible with ZP3 control panels, computerized graphic monitoring software and interfaces used for integration with automation systems are also available as optional. Additional input / output circuits can be created with the cards that can be added to the panels, and panel type printers can be connected. Ziton MODULA Stand-Alone Control Panels MODULA series control panels have a structure that can be expanded modularly, starting from 1 loop to 8 loops, up to 1016 address capacity in total. It also supports conventional sensing circuits up to 48 zones. It is compatible with analog addressable field elements called ZP series. With its large LCD screen, alarm zone LEDs and easy programming alternatives, it fully meets all fire detection needs of medium and small scale applications. Multi-Sensor Algorithm Based, Interactive Fire Detectors ZX 832 algorithm-based, interactive fire detectors use their microprocessor and algorithms to generate alarm decisions depending on the smoke and temperature level coming from their sensors. ZX832 Detectors do not need to send any analog value to the panel and evaluate it there by generating the alarm decision completely in-house. Thanks to the algorithms used, false alarms are prevented and possible real alarms can be detected faster. Single and Multi Sensor Ziton Analog Addressable Fire Detectors ZP3 and MODULA are compatible with Ziton control panels, optical smoke and ionization smoke detectors, as well as multi-sensor detectors combined with optical smoke and temperature sensors, and point temperature detectors that can be programmed as both constant temperature and temperature rise rate. The analog values measured by the detectors are continuously sent to the control panel through the detection lines, and alarm and failure situations are decided by the algorithms installed in the control panels. Addressable Ziton Input, Output and Control Modules Addressing conventional type detectors and buttons, monitoring modules for monitoring the alarm and fault signals of smoke control devices such as fans and dampers, sprinkler systems, as well as audible / illuminated alarm devices, audible evacuation systems, smoke control devices and other building control systems to the specified fire scenarios Output modules and short circuit isolator modules required for proper activation are included in the analog addressable product group. Ziton modules are specially designed for in-panel rail mounting, providing ease of installation and assembly with their small dimensions. Ziton Addressable Audio / Light Warning Devices Addressable sound / light alarm devices are compatible with the addressable loop lines of the ZP3 and MODULA control panels. 124 of these addressable devices, which are capable of producing high sounds despite their low current consumption, can be connected to the same loop line together with detectors and modules and they can perform sufficient warning operations. One of the most important features of these devices is that they can be activated individually and they do not require additional cables for feeding. Addressable warning devices can also perform self-test procedures on their own, thanks to the test microphone inside. Intrinsically Safe Ziton Detector, Button and Modules One of the preferred methods for safe fire detection in industrial environments with flammable and explosive materials is applications using Intrinsically Safe (IS) devices. ZP3 and MODULA series panels offer a complete range of interfaces that can be connected to addressable loop lines, galvanic barrier, intrinsically safe single and multi-sensor detectors, button and input modules. Intrinsically safe barriers, detectors and audible / light warning devices have ATEX certificate for ia class explosive atmospheres. Our Ziton Fire Detection and Alarm Product range ZP3 serisi panelleri bir süredir seri üretimi sonlandırıldığı için mevcut projelerde yedek parça şeklinde tedarik edilmektedir. Ziton ZP2 Serisi Adreslenebilir Yangın Alarm Kontrol Panelleri ZP2-F1-19 Analog Adreslenebilir Yangın Alarm Kontrol Paneli - 1 Loop, 127 Adres Kapasitesi, Grafik LCD Ekran, 2 Programlanabilir Sesli Alarm Çıkışı, Güç Kaynağı ve Akü Şarj Ünitesi ile birlikte - Büyük Kabin, Türkçe Menü ZP2-F1-S-19 Analog Adreslenebilir Yangın Alarm Kontrol Paneli - 1 Loop, 127 Adres Kapasitesi, Grafik LCD Ekran, 2 Programlanabilir Sesli Alarm Çıkışı, Güç Kaynağı ve Akü Şarj Ünitesi ile birlikte- Küçük Kabin, Türkçe Menü ZP2-F2-19 Analog Adreslenebilir Yangın Alarm Kontrol Paneli - 2 Loop, 254 Adres Kapasitesi, Grafik LCD Ekran, 2 Programlanabilir Sesli Alarm Çıkışı, Güç Kaynağı ve Akü Şarj Ünitesi ile birlikte - Büyük Kabin, Türkçe Menü ZP2-F4-19 Analog Adreslenebilir Yangın Alarm Kontrol Paneli - 4loop , 508 Adres Kapasitesi, Grafik LCD Ekran, 2 Programlanabilir Sesli Alarm Çıkışı, Güç Kaynağı ve Akü Şarj Ünitesi ile birlikte - Büyük Kabin, Türkçe Menü Ziton ZP Serisi Kontrol Panelleri için Giriş/Çıkış Opsiyon Kartları 2010-2-NB ZP2 Analog Adreslenebilir Yangın Alarm Panelleri için Network Kartı ZP2-LB ZP2-F2-S için Genişletme Kartı, 2 Loop, 254 Adres Kapasitesi, 4 Programlanabilir Sesli Alarm Çıkışı ZP2-ZI-20 ZP2 Paneller için Zone LED Göstergesi - 20 zon için ZP2-ZI-24 ZP2-S Paneller için Zone LED Göstergesi - 24 zon için ZP2-ZI-40 ZP2 Paneller için Zone LED Göstergesi - 40 zon için 2010-2-232-KIT ZP2 Panelleri için RS232 Kit ( Yazıcı Bağlantısı için Kullanılmaktadır.) Ziton ZP2 Serisi Kontrol Panelleri için Grafik İzleme Yazılımı ve Lisanslar ATS8600 Grafik İzleme ve Kontrol Yazılımı, Başlangıç Paketi: maksimum 2 cihaz için ATS8605 Genişletme Lisansı (ATS8600 için) ATS8610 Grafik İzleme ve Kontrol Yazılımı, Business Paketi: maksimum 25 cihaz için ATS8640 Genişletme Lisansı (ATS8645 Eklenebilmesi için) ATS8645 İlave Yazılım (ilave edilecek ZP2 Panel Sayısı Kadar Kullanılmalıdır.) 2010-2-PAK-900 ZP2 Paneller için Apollo Driver 2010-2-PAK-NET128 Ziton Network Genişletme Lisansı - 32 nodes / 128 loops 2010-2-PAK-NET256 Ziton Network Genişletme Lisansı - 64 nodes / 256 loops 2010-2-PAK-RMBN ZP2 Panelleri için Haberleşme Arabirim Lisansı - BACnet IP 2010-2-PAK-RMMB ZP2 Panelleri için Haberleşme Arabirim Lisansı - Modbus IP 2010-2-PAK-RMSDK Adreslenebilir Yangın Panel Aksesuarı, Uzak Kontrol ve IP üzerinden SDK Paylaşımı Tüm Türkiye Geneli UTC Ziton Yangın Algılama ve Alarm Panelleri Platin Teknoloji'de .

Adresli Gaz Algılama  Alarm ve İhbar Sistemleri ile aynı hat üzerinden çok gaz algılama çözümleri Addressable Multi Gas Detection Alarm and Warning Systems We offer addressable gas detection and automation solutions that enable the detection of flammable, explosive and toxic gases that can be found in the same area in many areas in industrial facilities over a single line and system. After the gas is detected, we can easily provide evacuation scenarios according to the nature of the gas by integrating with other systems. Multi Gas Control Panel features Communication over single line cable Possibility of analog or addressable connection up to 256 detectors. Exproof detector connection on the same line Different alarm scenarios for each detection with up to 256 relay outputs Can be programmed via computer. Instant viewing on computer. Automatic integration with other systems Printer printer port DETECTABLE GAS AND CHEMICALS LIST METHANE (METHANE) EXPLOSIVE LPG EXPLOSIVE FUEL STEAM EXPLOSIVE BUTAN (BUTANE) EXPLOSIVE PROPANE (PROPANE) EXPLOSIVE HEXANE (HEXANE) EXPLOSIVE HYDROGEN (HYDROGEN) EXPLOSIVE ACETONE (ACETONE) FLAMMABLE, FLAMMABLE BUTYL ALCOHOL (BUTYL ALCOHOL) FLAMMABLE, FLAMMABLE CYCLOPENTANE (CYCLOPENTANE) EXPLOSIVE ETHYL ACETATE FLAMMABLE, FLAMMABLE ETHYLETHER FLAMMABLE FLAMMABLE HEPTANE (HEPTANE) FLAMMABLE FLAMMABLE ISO BUTYL ALCOHOL (ISO BUTYL ALCOHOL) FLAMMABLE FLAMMABLE ISO PROPYL ALCOHOL (ISO PROPYL ALCOHOL) FLAMMABLE FLAMMABLE METHYL ETHYL KETONE (METHYL ETHYL KETONE) FLAMMABLE FLAMMABLE PENTAN (PENTANE) FLAMMABLE FLAMMABLE TOLUENE (TOLUENE) FLAMMABLE FLAMMABLE ACETYLENE (ACETYLENE) FLAMMABLE FLAMMABLE BENZENE (BENZENE) FLAMMABLE FLAMMABLE STYRENE FLAMMABLE FLAMMABLE HYDROGEN SULPHIDE (H2S) TOXIC SULFUR DIOXIDE (SULPHUR DIOXIDE - SO2) TOXIC CHLORINE (CHLORINE - CL2) TOXIC CARBON MONOXIDE CO POISONER CARBON DIOXIDE (CO2) POISONER NITROGEN DIOXIDE (NITROGEN DIOXIDE - NO2) POISONER NITRIC OXIDE (NITRIC OXIDE - NO) POISONER VINYL ACETATE FLAMMABLE FLAMMABLE JP8 (JET PROPELLER) FLAMMABLE FLAMMABLE ETHYLENE OXIDE (ETO) FLAMMABLE FLAMMABLE AMMONIA (AMMONIA) POISONER XYLENE (XYLENE) TOXIC TRI METHYL BENZENE (TRI METHYLBENZENE) POISONER PROPYLENE (PROPYLENE) FLAMMABLE FLAMMABLE NONANE (NONANE) FLAMMABLE FLAMMABLE METHYL ALCOHOL (METHYL ALCOHOL) FLAMMABLE FLAMMABLE ISO PENTAN (ISO PENTANE) FLAMMABLE FLAMMABLE İSO BÜTAN (ISO BUTANE) FLAMMABLE FLAMMABLE ETHYLENE (ETHYLENE) FLAMMABLE FLAMMABLE ETHYL ALCOHOL (ETHYL ALCOHOL) FLAMMABLE FLAMMABLE ETAN (ETHANE) FLAMMABLE FLAMMABLE CYCLOHEXANE (CYCLOHEXANE) FLAMMABLE FLAMMABLE BUTYL ACETATE FLAMMABLE FLAMMABLE ACETIC ACID (ACETIC ACID) FLAMMABLE FLAMMABLE

iş merkezi , çok katlı binalar ve plazalar için elektronik güvenlik , yangın algılama ve zayıf akım çözümleri Our experts, who offer special solutions for General Directorates, Plazas, Business centers, Multi-storey buildings and plazas where there are thousands of people and visitors at the same time, where institutions, organizations and companies are common, offer the solutions below for multi-storey plaza and office buildings. FIRE DETECTION AND WARNING SYSTEM: Control of all office, administrative, mechanical areas and parking lots of the plazas against fire risk.It provides instant detection of the first formation of the fire in the form of particles and allows the fire to be intervened before it grows. For this purpose, the fire alarm systems installed by Platin Teknoloji prevent the life-threatening of the personnel in the environment and material damage to the building. The system includes a fire control panel. It evaluates the warnings coming from various type detection elements suitable for the needs of your business and activates the sirens, flashers, telephone dialer. It delivers detailed information to the call center and security point. While all these events are taking place, from the moment the fire is detected, it is ensured that the previously prepared alarm scenarios are activated by sending information to the elevator, ventilation system, pressurization fans, smoke evacuation system, turnstiles, etc. CLOSED CIRCUIT CAMERA SYSTEMS: Camera systems, which are used to minimize the risks in indoor and outdoor areas and special security and operational risks within the boundaries of the plaza, produce indispensable solutions for operational security. We offer camera solutions and NVR recording devices and command control center solutions suitable for all business and manufacturing conditions. Our products do not only register. It produces alarm scenario solutions in order to prevent the occurrence of events, problems and risks by performing event analysis. All systems record in the structure and quality determined by the relevant institution and ensure that images of appropriate quality are accessed when necessary. DETECTION OF FLAMMABLE, EXPLOSIVE AND TOXIC CHEMICALS AND GASES: Necessary perceptions are made to minimize the risks caused by flammable explosive gases and chemicals used in the mechanical areas of heating, cooling, etc. of all buildings, and to prevent damage to the personnel and the enterprise. Platinum technology engineers provide customized solutions for your business to identify these risks caused by gases and chemicals and to evacuate them before the risk grows. FIRE DETECTION WITH VERY SENSITIVE AIR SAMPLING AND ANALYSIS SYSTEMS: The sensitive laser sensor, which continuously samples air from the system room, ensures that the quality of the air passing through the sampling room is monitored and the fire is detected at the moment of its occurrence. LASER TYPE FIRE DETECTION AND SMOKE DETECTION EQUIPMENTS: At points where high ceiling point type fire detection systems do not work efficiently, laser beam detectors are used to minimize operational and installation costs, economic and fire risks. The system ensures that the fire is detected at the time of its first occurrence by mutually controlling the beam of light it generates. ELECTRIC PANELS AUTOMATIC FIRE EXTINGUISHING: Cabinet type extinguishing systems that provide low initial investment and operating costs and high performance are used for electrical panels and cabinets where risks are concentrated. It provides effective extinguishing with HFC227ea and HFC125 etc. extinguishing gases used in fire extinguishers. They are odorless, colorless, non-residual gases that do not harm electrical material. WATER MOISTURE DETECTION AND ALARM SYSTEMS: Prevention of damage to the establishment as a result of leakage and humidity that will occur out of control from risky areas for warehouse, boiler room, mechanical areas and building, Detection of possible floods, Warning of the relevant parties and according to the prepared scenario, the water evacuation engine heating system, ventilation system These are the solutions to put into use. AUTOMATIC FIRE EXTINGUISHING SYSTEMS: Special risks such as system room, operational areas, vault room etc. that will cause significant damage to the enterprise and solutions that will extinguish electrical fires in a very short time are offered, Automatic extinguishing systems to prevent damage to the business and manufacturing processes. The relevant extinguishing gas / chemical is selected and designed, taking into account the special situation of the establishment and the area where it will be established. The system user will make independent fire detection and initiate the extinguishing process. CABLE TRAYS, VENTILATION SYSTEMS FIRE DETECTION AND DETECTION SYSTEMS: With a special sensor cable to be installed in high risk and difficult to detect areas such as electrical installations and ventilation ducts, sudden temperature changes are detected at the points where it is located and fire is detected before it occurs. Linear Heat Detection is a versatile and economical fire detection product. Considering the initial investment, maintenance, operating costs and operating performance, .Extrem offers economical and performance solutions for fire detection needs. ACCESS CONTROL SYSTEMS: We offer solutions for controlling and reporting the staff visitor circulation in all areas of the business center. Due to the determined business, security and occupational safety needs, the doors of risky rooms are controlled by the access control system. We offer solutions such as personnel card, fingerprint, eye recognition, etc. at the entrances to these rooms. Access control application covers all determined areas starting from the first entry point of the enterprise. It is possible to report all movements and to make the necessary controls online. The buildings belonging to the enterprise can be controlled and monitored from the same central software wherever they are in the world. TURNSTILE AND BARRIER SOLUTIONS: Building and floor entrances are arranged and limited with turnstiles used in integration with the access control system in all areas where human traffic in the building needs to be controlled. Thus, it is used for the purpose of controlling the transitions at the points and places where the transition should be made within the order determined by the general directorate. All of our turnstiles are microprocessor-based and allow only one person to pass at a time. Turnstiles have automatic falling arm feature and illuminated and audible indicators. SYSTEM ROOM ENVIRONMENTAL MONITORING AND REPORTING SOLUTIONS: It has been developed to ensure that important technical rooms can operate without risk. It monitors the criteria such as heat, humidity, fire, smoke, network-ups voltages, unauthorized entry etc. of special rooms such as system room and ensures that the relevant persons are warned and reported without a possible detection. . In addition to the ability to monitor system parameters, it provides integration with other systems in case of an event. In cases of sudden temperature increases and decreases, ups and network voltages, water and humidity raids, unauthorized entry, etc., the system room provides a warning in the form of e-mail or SMS. In this way, the alarm & technical malfunction that caused the error is detected as soon as possible and effective and fast measures are taken. FIRE DETECTION AND ALARM SYSTEM TEST EQUIPMENTS: Testing and regular maintenance of fire detection system equipment established by making serious investments in enterprises are among the overlooked needs in our country. Platin Technology has offered suitable test gases, cleaning and control apparatus for all detector types such as smoke, heat, gas and carbon monoxide, which make up the fire detection system, to the use of professional operating and fire system maintenance companies. EMERGENCY ROUTING LUMINAIRES: In case of a power failure, especially in multi-storey buildings, in case of a power outage, such as fire, earthquake, the electrical energy of the building or building is interrupted for safety purposes, when a circuit breaker or a fuse is opened, it is automatically activated and evacuated. are devices and systems that guide users for EMERGENCY ANNOUNCEMENT AND SOUNDING SYSTEM: Emergency announcement and public address systems are the solutions used for the rapid evacuation and direction of the employees in the buildings and safely in emergency situations. SECURITY AUTOMATION SOLUTIONS: It installs security automation systems against theft and sabotage. These systems, which are needed today, are the definitive solution to robberies and unauthorized access. The possibility of false alarms of these systems is very low and they provide the opportunity to intervene in the system only with the correct password. There are products and systems with different detection features in security systems according to the purpose and protection system. Electronic systems integrated with alarms are systems in which the security risks of large-scale areas such as Head Office, regional directorate, branch, campus, etc. are minimized by instantly activating scenarios and taking necessary precautionary warnings. KEY MANAGEMENT SYSTEMS: It is ensured that all keys of the common areas in the building can be easily accessed when necessary and key management solutions that enable the reporting of key usages to prevent key confusion and to protect them securely. LIVING SOLUTIONS WITHOUT BARRIERS: These are electronic solutions offered for disabled visitors and employees to meet their daily needs risk-free and comfortably within your business and to minimize possible risks. What are the risks? We offer solutions to the need for help and urgent struggle in wet areas, the need for medical assistance in general areas, and the risks of reaching exits without assistance in emergency evacuation processes. It offers electronic security solutions to minimize the risks of multi-storey buildings, plazas and office areas. Please contact us for special solutions for your projects in Turkey and all countries in our service area.

Provide control without touching your hand with the Contactless Button Panic Alarm Button Panic alarm emergency medical response button systems are installed to quickly transmit information to the security and health units in possible emergencies in closed areas where people are gathered. Established panic alarm buttons are implemented in existing shopping malls without the need for modification. Thanks to the system, which has been applied by Platinum technology experts for many years, it is ensured that the necessary medical assistance can be reached quickly in possible accidents in the shopping mall, and rapid intervention to safety problems is ensured. The system consists of fixed wired / wireless panic buttons. Panic alarm and emergency intervention button works in integration with other existing security and camera systems for fast and effective intervention. Wired health button options Wireless health button options TCP / IP health button options As an option, alarm, malfunction and error information of the whole system is kept. It is possible to follow up all alarms that will come from the field on the central management screen, and monitor possible device malfunctions. It is offered as an option to send detailed alarm information via SMS. It is possible to provide the call automatically for the health, security unit and ambulance in charge of the enterprise. Friday, February 26, 2016 Official newspaper Number: 29636 From the Ministry of Customs and Trade: REGULATION ON SHOPPING MALLS ARTICLE 8 - (1) An emergency medical response unit of at least twenty square meters is established in an easily accessible place of the shopping center in order to provide the first response in emergency medical situations and to provide referral to the nearest hospital in case of need. (2) At the entrance of the emergency medical response unit, there is a letter and sign of "Emergency Medical Response Unit". The location of the emergency medical response unit is indicated by signposts. (3) At least one emergency medicine technician or emergency medicine technician in the shopping center with a sales area of less than twenty thousand square meters, at least one emergency medicine technician and at least one emergency medicine technician or emergency medicine technician in the shopping center with a space of twenty thousand to fifty thousand square meters, Two emergency medical technicians, at least one emergency medical technician and emergency medicine technician in the shopping center with a sales area of fifty thousand to one hundred thousand square meters, and at least one emergency medical technician and medical doctor in the shopping center with a sales area of one hundred thousand square meters or more. (4) First aid materials and equipment in the quality and quantity determined by the Ministry of Health are kept in the emergency medical response unit. (5) A sufficient number of emergency medical status buttons are placed in visible parts of the common use areas in the shopping center and retail businesses larger than four hundred square meters in order to communicate with the emergency medical response unit. (6) The services envisaged in this article may also be provided by purchasing services from private healthcare providers. Where are Contactless No Touch Buttons Used? Door release button Vending button crosswalk button Machine start button Light switch button Emergency exit button Emergency stop button wc dryer button wc towel dispenser button Emergency button It has an ergonomic and modern design. Sensor detection distance can be adjusted between 5-20cm. Output times can be adjusted up to 1-25 seconds. It informs the user with its blue-green LEDs. It is high performance and reliable. It has a supply voltage range of 12VDC-24VDC. It is designed to be used indoors. You can get support from Platinum Technology experts for panic button solutions that enable all disabled and non-disabled individuals to quickly access help from the relevant unit in case of a possible health, security, etc. panic situation.