Site Search Results

Securiton Early Fire Detection Specialist Securiton AG belongs to the Swiss Securitas Group and has been in full technical security service since its establishment in 1948. With its pioneering spirit and far-sighted approach, it was developed as an approved specialist for high standards of safety. Years of partnership-based collaboration with clients, consultants, government agencies and authorities is proof of our extensive knowledge and confidence in quality. Today, Securiton designs, installs and maintains systems for the security industry and defense technology both in Switzerland and worldwide. As a competent consultant and a recognized plumber, Securiton offers a wide range of security systems for fire detection, burglary / hold alarm systems, personal protection, access control, video surveillance, property and environmental protection. You can get support from Platin Technology experts in Turkey-wide projects. SecuriRAS ASD suction smoke detectors: the complete range for any application Securiton's smoke absorbing smoke detectors are among the most sensitive and reliable early warning systems to fires. Securiton offers a full range of models that make the lightning-fast detection of fires both scalable and cost-effective for any monitoring area.SecuriRAS ASD 531 - simple and convenient for small facilities ASD 531 for fast commissioning and professional use of smaller areas and facilities. It is available to everyone without the need for monitoring and training. The detector is configured directly on the device without the need for a computer and the operation is uncomplicated. As with the two large models, it is equipped with a tried and tested HD detector with LVSC (large volume smoke chamber). This results in exceptional sensitivity combined with an impressive long service life.SecuriRAS ASD suction smoke detectors: the complete range of models for any application Securiton's smoke absorbing smoke detectors are among the most sensitive and reliable early warning systems to fires. Securiton offers a full range of models that make the lightning-fast detection of fires both scalable and cost-effective for any monitoring area.SecuriRAS ASD 531 - simple and convenient for small facilities ASD 531 for fast commissioning and professional use of smaller areas and facilities. It is available to everyone without the need for monitoring and training. The detector is configured directly on the device without the need for a computer and the operation is uncomplicated. As with the two large models, it is equipped with a tried and tested HD detector with LVSC (large volume smoke chamber). This results in exceptional sensitivity combined with an impressive long service life.SecuriSens ADW 535 line type heat detector: Detecting fires in extreme conditions Fires are more common in hazardous areas - conventional fire detectors quickly reach their limits. Securiton's smart line heat detector works perfectly even under the harshest conditions. Fully automatic monitoring of large areas, resistance to corrosive gases, excessive humidity and high temperatures, or distinguishing between false alarms and real dangers - state-of-the-art line The list of requirements for a type heat detector is both long and exhaustive. SecuriSens ADW 535 heat detector - uncompromising operation Fire detection should be possible in all ambient conditions - not only in good weather and room temperatures. Whether in the gas and oil industry, chemical production facilities or vehicle storage halls, loading platforms and road tunnels, the ADW 535 comes into its own where other systems fail.

HID ® Omnikey ® 3021 USB Card Reader High performance Omnikey smart card reader with USB interface One of the world's leading innovative smart card reader manufacturers HID Global offers a high-performance smart card reader in a small form factor for desktop and mobile use with the OMNIKEY® 3021 USB. The OMNIKEY® 3021 is an easy-to-install USB device suitable for all contact smart card transactions such as online banking or digital signature applications. ​ Main Features elegant design Small form factor suitable for the letter shop All major operating systems supported High speed data transmission

Genesis Edwards Siren Flasher Equipment Founded in 1872 by Robert Edwards and David Rousseau, the Edwards Company has a rich history of success. 1872- Edwards and Company was founded by Robert Edwards and David Rousseau to discover the new "Electric" phenomenon and to manufacture, sell and install battery-powered gas-fitting igniters. Among the company's first customers is a New York City church where the sextons previously climbed a 100-meter ladder to the light gas armatures above the rows. 1873 Rousseau withdraws from the partnership and is replaced by Adam Lungen. They invented and developed an electric doorbell and a burglar alarm. 1880 - The Edwards Company leaves the basement of the Lungen family's jewelery shop, moves into a three-story facility, and begins to manufacture wooden canals and enclosures for burglar alarms. 1881 - Robert Edwards receives his first patent for an electric bell. Other patents quickly followed: a retractable warning device (1882); an electric gas burner lighter (1883) for push button operation; and an electric door opener (1884). 1884 - Edwards displayed its products at the first electricity fair in the United States. Held in Philadelphia, was called the "Electricity Exhibition, National Electricians Conference". 1886 - Alongside burglar alarms and fixture igniters, the Edwards catalog lists electrically wound clocks, program systems, and coils for the first time. 1896 - Edwards stopped installing electrical devices and limited his activities to the design and manufacture of signaling, communication, and protection equipment. 1900 - Horizontally operated piston bell designed. The basic design is used for today's Edwards AdaptaBel. 1901- First national distributor of "household electrical appliances" appointed by Edwards Company. 1903 - The New York Stock Exchange bell was set to initiate the start and end of each day trading. 1912 - Edwards car call is introduced, reporting all-weather conditions for department stores. 1915 - Bronze Medal of Honor for electrical products awarded to Edwards at the Panama-Pacific Fair, San Francisco, CA. 1917 - Waterproof bells and submarine detection devices made for the Navy, a special telegraph apparatus developed for the Signal Corps. 1927- The Holland Tunnel is opened with Edwards emergency signaling installed on 2-mile twin tubes. Electrical devices ordered from Edwards for the White House. 1929 - Montreal Curb Exchange orders "Silent Call" alerts. Edwards & Company of Canada is formed. 1935 - Lungen buzz vibrating probe at the bottom of the world's deepest oil well 11,300 feet below the earth's surface. Edwards guard tour, sprinkler and fire alarm system installed at Rockefeller Center in New York City. 1936 - New glass-breaking fire stations are introduced to replace the hammer and chain types. 1938- Boeing Aircraft Co. Edwards signaling devices and signaling systems for double-deck flying clipper ships. 1941 - The world's largest car ferry, Midland City leaves Michigan waterways equipped with Edwards waterproof signals. Budd Co. has equipped its latest "Silver Meteor" trains with Edwards reporters. 1945- Edwards, Fifth Army-Navy E. 1948 - Edwards-made fire alarms are installed on SS President Cleveland and SS President Wilson, new cruise ships traveling around the world. The James H. McGraw Award, Manufacturer Medal of the Year, was presented to RS Edwards. 1950- New Edwards factory opens in Owen Sound, Ontario, Canada. 1951- Teardrop fire alarm station introduced: Called "a model of impeccable simplicity" by the Associated Press. 1956 - Production facilities for distributor products transferred to the new Pittsfield, Maine plant. 1961 - An audiovisual nurse call with patient privacy feature shown at the American Hospital Association Exposition, Atlantic City, NJ. 1962 - Edwards Corporation becomes a business unit of General Signal Corporation. 1964- Edwards fire alarm system was determined for 52-storey Vertical Assembly Building in Cape Kennedy, the largest structure in the world. 1965- Edwards systems installed in the Visual Arts Museum designed by LeCorbusier for the Harvard University campus. 1966 - Manitoba, the largest municipal public system in Canada designed and established by Edwards, police and fire control centers for the city of Winnipeg. 1967 - Edwards supplies 77 fire alarm systems to Expo '67, Montreal. 1971- JFK Performing Arts Center was equipped with Edwards fire alarm system. 1973 - Edwards buys Electrons, Inc., maker of Cat. 280 series heat detector. 1976 - Edwards introduces a new ionization smoke detector. 1979- Edwards introduces new Greenline Series Fire Alarm Chimes. 1981- Edwards incorporates the latest microprocessor technology into the next generation of "programmable" signals with the launch of the Adaptatone product line. 1982 - Edwards begins a planned expansion of hazardous audio and visual signals that will result in the most up-to-date and complete line in the industry. 1984 - The first Edwards piezo-electric signals are introduced, demonstrating the adoption of the latest technology in light duty signaling. 1985 - Edwards begins expanding a planned industrial flasher and pointer products that will result in the highest quality and most complete line in the industry today. 1986 - A new, state-of-the-art photoelectric smoke detector is introduced by Edwards. 1994- Edwards buys the signaling product line from Thomas Industries' Benjamin Division. These new products, previously produced in Sparta, TN, are consolidated at the Pittsfield, Maine plant. 1994- Edwards brought its highly advanced, multi-element sensor technology to the "Commercial" fire alarm market. State-of-the-art production processes have been established in the Pittsfield factory to support the production of these products. 1998 - Edwards offers a new range of stackable visual signals, LED blinking, and steady visual signals and flashes. The new Triliptical stacklite is designed according to customer input. 2005 - Edwards was acquired by General Electric. Edwards merged with Kalatel, Sentrol and EST businesses to become part of GE Security. The company was well placed to be an international leader in video, fire and access control. 2010 - GE Security was acquired by United Technologies Corporation. Edwards Signaling has become part of the Detection and Alert business under UTC Fire & Security. Today. . . With headquarters in Farmington, CT, manufacturing in Pittsfield, ME, distribution in Portland, TN, and Sales and Service locations around the world, it seems like a very long road to the basement of Lungen's jewelery store. Yet many of the different products Edwards manufactures today are direct descendants of gas armature igniters, electric bells, and program systems that went into the design and construction of structures more than a century ago. 860 Series Electronic Horn / Flasher Horn Xenon flash light source Flash speed 60 fpm at 1 meter 100 dB / 90 dB at 10 ft Nexus 105 AC Klaxon Electronic Tone Siren Flasher 5J Xenon beacon Quarter turn fittings for ease of installation 113dB at 1 meter / 103dB at 10ft (max); 105dB at 1 ... Nexus 105 DC Klaxon Electronic Tone Siren Flasher 5J Xenon or high efficiency LED Three alarm stages Quarter turn fittings for ease of installation Low inrush current Nexus 110 AC Klaxon Electronic Tone Siren Flasher 5J Xenon or high efficiency LED Low voltage AC variant Three alarm stages Quarter turn fasteners for ease of installation. Nexus 110 DC Klaxon Electronic Tone Siren Flasher 5J Xenon or high efficiency LED Three alarm stages Quarter turn fittings for ease of installation Low inrush current (LED ... Nexus 120 AC Klaxon Electronic Tone Siren Flasher 5J Xenon beacon Three alarm stages Quarter turn fasteners for ease of installation 120dB at 1 meter / 110dB at 10ft. (max.) .. Nexus 120 DC Klaxon Electronic Siren Flashlights - Xenon or LED Flasher 5J Xenon or high efficiency LED Three alarm stages Quarter turn fasteners 120dB at 1 meter / 110dB for ease of installation. Nexus 105 AC Klaxon Electronic Tone Siren Light 5J Xenon beacon Quarter turn fittings for ease of installation 113dB at 1 meter / 103dB at 10ft (max); 105dB at 1 ... Nexus 110 AC Klaxon Electronic Tone Siren Flasher 5J Xenon or high efficiency LED Low voltage AC variant Three alarm stages Quarter turn fasteners for ease of installation ... Nexus 120 DC Klaxon Electronic Siren Flashlights - Xenon or LED Flasher 5J Xenon or high efficiency LED Three alarm stages Quarter turn fasteners for ease of installation 120dB at 1 meter / 110dB ... 95 Series Horn-type 85 dB Audible / Visual Flasher AdaptaBeacon Light Duty Strobe Weatherproof Optically designed fresnel lens Built-in, base-mounted horn - 85 dB at 3.05 m (10 feet) Immunity ... 51SIN Series Horn PLC Compatible AdaptaBeacon® Fixed Outdoor Lights Weatherproof Built-in base mounted horn 85 dB at 10 feet (3,05 m) Cast base, ... 51 Series Horn PLC Compatible AdaptaBeacon Flashing Light Flasher Weatherproof Built-in base mounted horn of 85 dB at 10 feet (3.05 m) Cast base, 108 Series Multiple Status LED 3 LED visual signals in one compact housing Option to add an additional module for a fourth light using one. G1R-HDVM-E Genesis Series Electronic Sounder-Beacon, Red, EN54-23 Approved UTC Edwards G1R-VM-E Genesis Series Electronic Flasher, Red, EN54-23 Approved UTC Edwards G1R-HD-E Genesis Series Electronic Siren, Red UTC Edwards G1RB-MP Genesis Series Surface Mount Box for Sounders / Beacons, Red UTC Edwards

Digitex Community Emergency and Disaster Warning System Digitex brand offers integrated disaster management, emergency sound and warning siren systems. Comprehensive solutions can be offered with sirens that communicate with IP-based and alternative sources. Primary digitex products are warning systems for mass notification with graphical interfaces for sirens control (digital map) and high power DSE Electronic Sirens. Besides standard offerings, Platan also designs and manufactures special devices. Main users of Digitex systems are: Civil Defense, Fire Services, Medical Rescue Teams, Army and other rescue services, industrial facilities and the commercial sector. On the Platin Technology side, with Digitex products sold in Turkey and the Turkish Republics, it offers sound and siren systemic warning solutions in accordance with the emergency and disaster management scenarios of all major cities, regardless of size. For detailed information, you can reach Platinum Technology Experts.

Linear Cable Type Fire Detection Systems Kablo Tipi Yangın Algılama Sistemleri: Görüntü In case of fire detection problems that cannot be solved by conventional fire detection detectors in tunnels, ventilation ducts, shafts, cable trays, power plants and industrial facilities, special cable type sensors to be installed at risky points and sudden temperature changes at the points are detected and fire is detected with Linear cable type fire detectors. Linear Heat Detection is a versatile and economical fire detection product. Designed for use in a wide range of fire and heat detection applications, Linear cable is suitable for harsh environmental conditions where maintenance access is in the physical or hazardous area and / or where there is a requirement that cost-effective fire detection is installed. It can be used close to risky hazardous areas. Linear Heat Sensing cable is a combination of advanced polymer and digital technologies that can detect heat conditions anywhere along the length of the cable. The cable consists of a single heat sensitive polymer outer layer, insulated with two to three metallic conductors designed to break at specific process temperatures. These twisted conductors contact and change in ambient temperature allow to initiate a fire alarm condition from the control panel without calibration. Neither does this unique product need to be heated to initiate a fire alarm of a certain length, adding to the versatility. For more flexibility, Linear Heat Detection can be used with fire alarm control panels using one of the addressable monitor modules on the cable, or can be connected directly to a detection circuit by connecting cable. In addition, the option finding distance heat source interacts with linear heat detection fire Provides the control panel to determine and view the exact location, feet or meters from the panel. This small easy to install and maintain fire detection suite offers an enormous amount of valuable information. Easy installation and maintenance Minimal false alarm Provides hazard coverage to the cable at all points for maximum protection Compatible with Fike intelligent and conventional detection and fire alarm panels Available in a variety of lengths, cable sheathing and alarm temperatures for maximum flexibility. Scope of application Cable channels - Pans Conveyor belts Power Distribution apparatus: switchgear, transformers, motor control centers Dust collectors / additional chambers • Cooling Towers Warehouses / shelf storage • Mines Pipelines Bridges, piers, boats Refrigerated storage Tank areas Aircraft hangars Power plants • Factories Can the Protectowire Linear Heat Detector be used on control panels of other manufacturers? Yes, the electrical specifications of the Protectowire Linear Heat Detector are compatible with most manufacturer's control panels. The system designer should verify compatibility with the panel manufacturer of the Protectowire Linear Heat Detector. Due to the limitations in Protectowire length for each zone, the resistance of the conductors must be determined. Protectowire Control Panels are specially designed and approved for use with Protectowire Linear Heat Detectors and are recommended to ensure compatibility and ensure sole source system responsibility. What is the maximum listed range for each type of Protectowire Linear Heat Detector in the open field? The listed gap detector mounting layout will be used as a guide or starting point. Reduced space required based on factors such as ceiling height and construction, physical obstacles, air movement, or the authority to have Jurisdiction (AHJ). Maximum listed span for each type of Protectowire Linear Heat Detector as below: 30 feet (9.14m) to center, Type The range is listed for the Factory Mutual 155 ° F and 190 ° F points types EPC, EPR, XCR and XLT - TRI - 15 feet (4.6 meters) to the center. 25 feet (7.6 m) in the center - Protectowire 220 ° F and 280 ° F Types EPC and XCR.Protectowire 356 ° F Types EPC and XCR only points for proximity detection and do not have a range of points.Underwriters Laboratories (except Type TRI) all Gaps, Listed on models - 50 feet (15.24 meters) from the center. The TRI is FM and UL Listed approved only. Can the Protectowire Linear Heat Detector, with different alarm temperatures, be mounted in the same area? Yes, the Protectowire Linear Heat Detector (excluding Tri-Wire) may have the same internal structure and be directly spliced ​​in the same starting device circuit. This gives a single Protectowire Linear Heat Detector zone to protect multiple areas with different ambient temperatures. How is overheating or fire location detected in a Protectowire Linear Heat Detection zone? All Protectowire FireSystem control panels can be provided with the unique Alarm point location Meter. This feature allows control panels to display the linear distance (feet / meter) to the digital overheat point. Linear Cable Type Fire Detector Types PHSC-135-XLT Cable Type Temperature Detector - 57 ° C (meters) Protectowire PHSC-135-XLT-M Cable Type Temperature Detector - 57 ° C (meter) with Steel Wire PHSC-155-XCR Cable Type Temperature Detector - 68 ° C (meters) Protectowire PHSC-155-XCR-M Cable Type Temperature Detector - 68 ° C (meter) with Steel Wire PHSC-190-XCR Cable Type Temperature Detector - 88 ° C (meters) Protectowire PHSC-190-XCR-M Cable Type Temperature Detector - 88 ° C (meter) with Steel Wire PHSC-220-XCR Cable Type Temperature Detector - 105 ° C (meters) Protectowire PHSC-220-XCR-M Cable Type Temperature Detector - 105 ° C (meter) with Steel Wire PHSC-280-XCR Cable Type Temperature Detector - 138 ° C (meters) Protectowire PHSC-280-XCR-M Cable Type Temperature Detector - 138 ° C (meter) with Steel Wire PHSC-356-XCR Cable Type Temperature Detector - 180 ° C (meters) Protectowire PHSC-356-XCR-M Cable Type Temperature Detector - 180 ° C (meter) with Steel Wire PIM-120 Protectowire Mini Zone Interface Module - 1 Class B Detection Zone PIM-430 Protectowire Zone Interface Module - 2 Detection Zones PIM-430D Protectowire Zone Interface Module - 2 Detection Zones, Alarm Quantity Display PIM-430DE Protectowire Zone Interface Module - 2 Detection Zones, Alarm Meter Display, External Type Enclosed PIM-430DE-I Protectowire Intrinsically Safe Zone Interface Module - 2 Detection Zones, Alarm Meter Display, External Type Enclosed, 2 Zener Barriers Included PIM-430E Protectowire Zone Interface Module - 2 Detection Zones, External Type Enclosed PIM-430E-I Protectowire Intrinsically Safe Zone Interface Module - 2 Detection Zones, External Type Enclosed, 2 Zener Barriers Included

People Counting Systems Has there been fewer visitors, or has there been a decrease in the number of customers with no noticeable change in the number of visitors? Here is the answer to this critical question, Financial metrics alone cannot really help retailers measure store performance. You can observe that sales have dropped compared to the previous month or Year, but are you using data that helps you comment on why it went down? Did the store have fewer visitors, or did the number of customers decrease with no noticeable change in the number of visitors? The answer to this critical question is the most important factor that enables retailers to effectively analyze their sales figures, evaluate opportunities and ultimately increase their sales figures. By measuring the human traffic entering and leaving your store with the people counting software via Platin Technology Camera, - Analyze your store performances !! - How useful is advertising work? - How accurate are the store opening hours? - Is staff distribution optimized? - What is the Conversion Rate of the store? Allows you to find answers to your questions !! Unfortunately, the most basic metric of the retail industry is either not used at all or used incorrectly. If the managers do not monitor and analyze the store traffic, how do they manage their stores? Hundreds of people visit a store every day. While some of these visitors successfully become customers, hundreds of them leave the store without shopping. The ratio of the number of visitors converting to customers to the total number of visitors gives the conversion rate for a store. This ratio is the most basic metric of the retail industry. CONVERSION RATE = NUMBER OF CUSTOMERS THE NUMBER OF VISITORS INTERFERENCE - IMPACT FACTOR You can observe the effects of store and window designs, visual marketing and innovations, promotions, campaigns and discounts on the number of visitors. ADVERTISING EXPENSES OPTIMIZATION: While advertising and store organization are used to attract and influence customers, measuring human traffic is also used to measure how these organizations are delivering. Normally it is a success for a company to increase its sales by 7%, but there is one more point to be analyzed. If the traffic of this store has increased by 30%, it is observed that the sales potential of the store is fully utilized. By measuring human traffic, you find a relationship based on concrete data between sales and number of visitors, and accordingly, you optimize your advertising and promotion expenses. PERFORMANCE COMPARISON: A detailed analysis of human traffic allows you to compare store and non-store variables in different locations. It allows you to get comprehensive information about your staff at each store. In this way, you can easily compare the store performances with each other and make more fair and conscious evaluations about the personnel. For example, if there is a decrease in the sales figures of a store and the conversion rate is stable, it means that the reason for the decrease in sales figures is out of store factors rather than personnel performance.

Calectro Flood and Moisture Detection Systems Calectro was founded in Gothenburg in 1969 by a young technician, Karl Johan Pettersen. The company was established as an agency company for suppliers in Switzerland and Denmark. Including program electronic thermostats, level controls, time relays etc. The main idea was to find customers with special needs and develop them in close cooperation with the customer. This quickly led to the development of the first electronic overfill protection approved for oil tanks. A completely new electronic freezer protection has also been developed through close contact with a number of control and regulatory companies. In the 1970s and 1980s the company expanded significantly, and in the late 1980s it was expanded to include its own development and production, including Calectro's offering. One-pipe smoke detector for the UG-1 ventilation system, which has become an instant success. Since then, Calectro has offered to develop quality products from accredited suppliers, as well as products developed specifically for its customers. 50 years after its inception, Calectro is a full-fledged technology and distribution company with dealers in many countries and a strong Swedish customer base. Perhaps the best known product is the Uniguard® single-pipe smoke detector, currently used by many project firms in the control and regulation industry in Turkey, Sweden and Europe. Water and Moisture Leak Detection Systems in Platinum Technology; Thanks to this system applied to system rooms, cash registers, storage areas and places affected by water and moisture, the system will activate the siren unit in case of moisture or water formation that may be a risk. According to the pre-prepared scenario, the water discharge engine will activate the heating system and the ventilation system. and if it occurs outside of working hours, it will transmit information by calling the users' phones. Flood detection and alarm system can send mail and sms according to the requests. You can also keep all information in the event memory and report it. With the smart phone application, you can manage the system, report it and receive instant notifications. You can reach Turkey-wide Calectro flood and moisture detection products and special prices for your projects from Platinum Technology. Digital Type Detection Systems - Equipment used - Water detection sensor - Humidity detection sensor - Control Panel - Siren - Telephone search device - Web connection module - SMS module Water Humidity and Leak Detection System Application Areas IT / Server system Rooms Electrical Rooms Heating Cooling centers Data Centers · Hotels Kitchen / Toilet & Vending Areas Hospitals Empty Complexes Supermarkets · Museums Art Galleries Archive Facilities

Electric Safety Locks The access control system is used to monitor the entrances and exits of the people, to limit the rooms they will use in the building, to track and report the movements of the users. It is made of various materials that need to be controlled. Effective electric lock solutions for Steel, Glass, Aluminum, Sheet, Wood, Decorative doors Magnetic Locks Metal doors, glass doors, which are desired to be electrically controlled, are products that will be effective solutions for heavy or sensitive doors. Effective locking with up to 500 kg holding force Electric Strikes They are products that will be effective solutions in areas in doors made of materials such as aluminum and wood, which are desired to be electrically controlled. Electromagnetic Locks Double-sided doors are the solution for locking automatic mechanism electric doors when they are out of use. Cabinet, Cabinet Locks It is the ideal locking solution for cabinet, drawer, showcase and cabinet doors and for doors that do not require high holding force. Due to its much smaller size compared to standard locks, it allows it to be used in places where other locks cannot be applied. Panic Bar Type Lock Striker It is designed to be used with panic bars used in fire and emergency exit doors. It is an effective electric locking solution. Electric Door Opening and Closing It is the solution for automatic electrically opening and closing of existing doors. Doors can be used without contact. High Security Lock Striker Suitable for steel and aluminum doors that are used extensively and require high security striker solutions. Sliding Door Type Electric Locks Effective safe lock solutions for the control of sliding doors that are difficult to control electrically

Rack Cabinet Electrical Lock and Control Systems In every large corporation with IT Operation, from the entrance to the building to the entrance of the system room, many and various identity and authorization control (physical security) processes, including biometric, are subjected.  However, once inside the system room, there is no control in access to the cabinet, including disk, backup, server, network devices and even patch panel: it is considered "safe". There may be tracking systems such as cameras, but these can only be used for tracking and / or retrospective tracking. Theoretically, each cabinet is kept locked in the System Room; However, since this method is not practical in practice, these keys are either all the same, are not subject to a follow-up process or are not used at all: authorization, logging and alarm management are not made in accessing the cabinet. Solu Rack cabinet type are access control applications. Special protection cages are installed only for critical systems (Firewall, HSM, etc.) that must be under lock and key at all times. However, many people, including system admin, data networker, electrician, fireman, alarmist, security guard, cleaner and even visitor, can reach the side of the system cabinets (controlled or uncontrolled). In addition, it is necessary to keep the cabinet doors constantly closed not only for safety, but also for maintaining the ambient air conditioning (temperature) balance. • Unlike the cabinets in the Data Center, stand-alone server / system / network cabinets in remote offices are located in locked but no access control rooms or in the office. Entry and exit to these environments are not monitored. There is no information available when and by whom the cabinet door was opened or whether it was closed or locked. There is a high security risk here. In the proposed solution: It is controlled from the Management System in the center thanks to its Ethernet connection and IP address. Access to the cabinet is under surveillance. Alarms are generated even with authorized access at inconvenient times. It can be opened remotely if needed. With the Cabinet Physical Access Control, space loss in the Data Center is eliminated. Each user enters the system room only with his / her card authorized to access the system cabinet. Access to other users' cabinets is denied. The opening and closing of each cabinet door is followed. Integrated System Management Software: • Runs on a physical or virtual Windows PC based on MS-SQL. • Authorization, Logging and Alarm management is done online, via date, time, person and card. • Door can be opened remotely for emergency management. • Various users can access simultaneously in client-server architecture. • User information can be retrieved from MS Active Directory. • It can be connected to existing Access Control System and Umbrella Alarm Management software via SNMP V.2. For your detailed questions, please contact Platin Technology Experts.

WC, Bathroom String Panic Alarm Systems It is the creation of panic alarm systems in the roped wet area (WC Washbasin) in order to quickly identify possible emergency and help requests among the necessary precautions to be taken for our elderly, sick and disabled individuals to continue their lives comfortably and safely in all areas. FOR OUR OTHER ELECTRONIC ACCESSIBILITY SOLUTIONS Kablosuz İpli Çağrı Sistemi Röle Çıkışlı İpli Çağrı Sistemi Wet area wc rope call button system and central alarm management software

Historical Artifact Restoration Solutions We offer wireless solutions for Electronic security weak current systems and technological requirements that arise during the restoration phase such as Historical Artifacts, Mansions, Mansions, Museums, Stone Buildings, Palaces. WIRELESS FIRE DETECTION AND WARNING SYSTEM; Control of all points belonging to the building to be restored against fire risk.With our wireless solutions, our wireless solutions enable the detection of the first occurrence of the fire in the form of a particle and intervention to the fire before it grows. For this purpose, the fire alarm systems installed by Platin Teknoloji primarily prevent the personnel in the environment from being in life-threatening danger and the building from material damages. There is a fire control panel in the system. It evaluates the warnings coming from various type detection elements suitable for the needs of your business and activates the sirens, flashers, telephone dialer. It transmits detailed information to the call center and the security point. During all these events, from the moment of fire detection, to the elevator, ventilation system, pressurization fans, Smoke evacuation system. It is ensured that previously prepared alarm scenarios are activated by sending information to systems such as, turnstiles etc. WIRELESS CLOSED CIRCUIT CAMERA SYSTEMS; Camera systems used to minimize the security and operational risks of restored buildings, museums, historical artifacts produce indispensable solutions for operational safety. We offer i camera solutions and DVR recording device and command control center solutions suitable for all business conditions. Our products do not only register. It produces alarm scenario solutions in order to prevent the occurrence of events, problems and risks by performing event analysis. AUTOMATIC FIRE EXTINGUISHING OF ELECTRIC PANELS TO PREVENT HISTORICAL WORK FIRES; Cabinet type extinguishing systems are used for electrical panels and cabins where fire risks are concentrated, providing low initial investment and operating costs and high performance. It provides effective extinguishing with the extinguishing gases such as HFC227ea and HFC125 etc. used in fire extinguishers. They are odorless, colorless, non-residual gases that do not harm electrical material. WATER MOISTURE DETECTION AND ALARM SYSTEMS; These are the solutions to prevent damage to the establishment as a result of leakage and moisture by following the possible flood and flood in the restored buildings, to detect possible floods, to warn the relevant people and to activate the water discharge engine, heating system, ventilation system in accordance with the prepared scenario. SYSTEM ROOM TRACKING AND REPORTING SOLUTIONS; It has been developed for important technical rooms to work without risk. It monitors the criteria such as temperature, humidity, fire, smoke, network-ups voltages, unauthorized access, etc. of special rooms such as the system room, and ensures that the relevant persons are warned and reported from a possible detection. In addition to the ability to monitor system parameters, it provides integration with other systems in case of an event. In cases of sudden temperature increases and decreases, ups and network voltages, water and humidity raids, unauthorized entry, etc., the system room provides a warning in the form of e-mail or SMS. In this way, the alarm & technical malfunction that caused the error is detected as soon as possible and effective and fast measures are taken. KEY MANAGEMENT SYSTEMS; Key management solutions that enable all areas and vehicles belonging to the business to easily access the keys when necessary and report key usage, preventing and securely protecting the keys. DISABLED LIFE SOLUTIONS; These are electronic solutions offered to meet the daily needs of disabled visitors and employees in your business without risk and easily and to minimize possible risks. We offer solutions for the need for help and urgent struggle in wet areas, the need for medical assistance in general areas, and the risks of reaching exits without assistance in emergency evacuation processes. It offers wireless weak current solutions that will minimize security risks for all restoration projects. Please contact us for special solutions for your projects in Turkey and all countries in our service area.

Industrial Gas Detection and Alarm Systems Situations that occur as a result of the concentration of gases used in the industry, produced during manufacturing or in storage areas at higher levels at the risk limits create a risk in terms of worker health and workplace safety, and cause damage to the business and products. Platinum technology engineers offer customized solutions for your business to identify these risks caused by industrial gases and to evacuate them before the risk grows. The resulting risks and their consequences are completely different for each gas and business. '' How many detectors do I need? And where can I find them? '' Two of the most frequently asked questions about gas detection systems, and are probably the two most difficult answers. Unlike other types of safety-related detectors, such as smoke detectors, the location and quantity of detectors required in different applications are not clearly defined. Only the right placement and product selection will be made with field risk analyzes and experiences. For the detection and measurement of flammable gases or Oxygen, standards such as EN 60079-29-2 and others regarding the selection, installation, use and maintenance of the instrument are available. For example, international codes such as the National Electrical Code (NEC) or the Canadian Electrical Code (CEC) application can be used in situations. In addition, certain regulatory bodies have published specifications, giving minimum gas detection requirements for specific applications. These references are useful, but they fall short in most applications, so the focus should be on business-specific risk analysis and solutions rather than a very general application. The placement of the detectors should be determined with the advice of experts with gas distribution expert knowledge, together with the knowledge of operating engineers, Platinum Technology engineers, Occupational health and safety experts and security personnel. Lists of the gases used in the business should be made and Detectors should be installed in the environments where they are most concentrated, at a height suitable for the structure of the gases and at the points where the possibility of gas condensation is the highest. Places requiring the most protection in an industrial facility would be around gas boilers, compressors, pressure storage tanks, cylinders or pipelines. The areas most likely to leaks are filling or discharge valves, gauges, flanges, T-joints, etc. connections. There are simple and quite often salient considerations that help to determine the detector location: To detect gases lighter than air (e.g. Methane and Ammonia) you should use detectors, highly mounted and preferably a collection cone. Detectors used to detect gases heavier than air should be installed at a lower level, air is heavier than gases (Butane and Sulfur Dioxide). Depending on the natural or forced air currents as a result of the gas leak, the distribution of the gas may be in different places, this situation must be taken into account. The operating conditions must be taken into account. Butane and ammonia, for example, should be used under the free pressure of a process line that is normally heavier than air but at a higher temperature so that the gas can fall rather than rise. Detectors should be placed in a small way of high pressure parts to allow gas clouds to form. Otherwise, any gas leak can be detected. While settling, conditions such as maintenance, external factors, etc. should be taken into consideration and automatic actions (scenarios) to be performed as a result of gas detection should be determined. Platin Teknoloji will produce solutions to your problems with its expert staff in industrial gas detection and alarm systems. LIST OF DETECTABLE GAS AND CHEMICALS IN THE INDUSTRY DETECTABLE GAS AND CHEMICALS LIST METHANE (METHANE) EXPLOSIVE LPG EXPLOSIVE FUEL STEAM EXPLOSIVE BUTAN (BUTANE) EXPLOSIVE PROPANE (PROPANE) EXPLOSIVE HEXANE (HEXANE) EXPLOSIVE HYDROGEN (HYDROGEN) EXPLOSIVE ACETONE (ACETONE) FLAMMABLE, FLAMMABLE BUTYL ALCOHOL (BUTYL ALCOHOL) FLAMMABLE, FLAMMABLE CYCLOPENTANE (CYCLOPENTANE) EXPLOSIVE ETHYL ACETATE FLAMMABLE, FLAMMABLE ETHYLETHER FLAMMABLE FLAMMABLE HEPTANE (HEPTANE) FLAMMABLE FLAMMABLE ISO BUTYL ALCOHOL (ISO BUTYL ALCOHOL) FLAMMABLE FLAMMABLE ISO PROPYL ALCOHOL (ISO PROPYL ALCOHOL) FLAMMABLE FLAMMABLE METHYL ETHYL KETONE (METHYL ETHYL KETONE) FLAMMABLE FLAMMABLE PENTAN (PENTANE) FLAMMABLE FLAMMABLE TOLUENE (TOLUENE) FLAMMABLE FLAMMABLE ACETYLENE (ACETYLENE) FLAMMABLE FLAMMABLE BENZENE (BENZENE) FLAMMABLE FLAMMABLE STYRENE FLAMMABLE FLAMMABLE HYDROGEN SULPHIDE (H2S) TOXIC SULFUR DIOXIDE (SULPHUR DIOXIDE - SO2) TOXIC CHLORINE (CHLORINE - CL2) TOXIC CARBON MONOXIDE CO POISONER CARBON DIOXIDE (CO2) POISONER NITROGEN DIOXIDE (NITROGEN DIOXIDE - NO2) POISONER NITRIC OXIDE (NITRIC OXIDE - NO) POISONER VINYL ACETATE FLAMMABLE FLAMMABLE JP8 (JET PROPELLER) FLAMMABLE FLAMMABLE ETHYLENE OXIDE (ETO) FLAMMABLE FLAMMABLE AMMONIA (AMMONIA) POISONER XYLENE (XYLENE) TOXIC TRI METHYL BENZENE (TRI METHYLBENZENE) POISONER PROPYLENE (PROPYLENE) FLAMMABLE FLAMMABLE NONANE (NONANE) FLAMMABLE FLAMMABLE METHYL ALCOHOL (METHYL ALCOHOL) FLAMMABLE FLAMMABLE ISO PENTAN (ISO PENTANE) FLAMMABLE FLAMMABLE İSO BÜTAN (ISO BUTANE) FLAMMABLE FLAMMABLE ETHYLENE (ETHYLENE) FLAMMABLE FLAMMABLE ETHYL ALCOHOL (ETHYL ALCOHOL) FLAMMABLE FLAMMABLE ETAN (ETHANE) FLAMMABLE FLAMMABLE CYCLOHEXANE (CYCLOHEXANE) FLAMMABLE FLAMMABLE BUTYL ACETATE FLAMMABLE FLAMMABLE ACETIC ACID (ACETIC ACID) FLAMMABLE FLAMMABLE DETECTOR INSTALLATION HEIGHTS FOR DETECTABLE GAS AND CHEMICALS 30LPG P-3035 P-3033 1,830 cm Above Ground 31METAN P-3135 P-3133 4.4 - 5 30 cm Down Ceiling 32PETROL STEAM P-3235 P-3233 1,230 cm Above Ground 33n BÜTAN P-3335 P-3333 1,630 cm Above Ground 34PROPAN P-3435 P-3433 2,130 cm Above Ground 35HEKZAN P-3535 P-3533 1,130 cm Above Ground 36HİDROGEN P-3635 - 430 cm Down Ceiling 37PENTAN P-3735 P-3733 1,530 cm Above Floor 38TOLÜEN P-3835 P-3833 1.2 - 1.27 30 cm Above Ground 39METANOL P-3935 - 6 - 6.7 100 cm Above Ground 40HEPTAN P-4035 - 1.0530 cm Above Ground 41OKTAN P-4135 - 130 cm Above Ground 42ETANOL P-4235 - 3 - 3.3 30 cm Above Ground 43ISO PROPANOL P-4335 - 230 cm Above Ground 45ASETON P-4535 - 2,6 - 3 30 cm Above Ground 46 METHYL ETHYL KETON P-4635 - 1,830 cm Above Ground 47ETHYL ACETATE P-4735 - 230 cm Above Ground 49ETHYLENE P-4935 - 2,7100 cm Above Ground 50ACETIC ACID P-5035 - 430 cm Above Ground 51BUTYL ACETATE P-5135 - 1,430 cm Above Ground 52 Cyclo Hexane P-5235 - 1,330 cm Above Ground 53CYCLO PENTAN P-5335 - 1.5 - 2 30 cm Above Ground 54DİOKSAN P-5435 - 230 cm Above Ground 55ETAN P-5535 - 330 cm Above Ground 56BUTYL ALCOHOL P-5635 - 130 cm Above Ground 57STYLEN P-5735 - 1,130 cm Above Ground 58PROPYLEN P-5835 - 2,430 cm Above Ground 59XYLENE P-5935 - 1.3530 cm Above Ground 60ASETLEN P-6035 - 3150 cm Above Ground 61BENZEN P-6135 - 330 cm Above Ground 63VINYL ACETATE P-6335 - 2,630 cm Above Ground 70HYDROCARBON (HC) P-7035 P-7033 * Specific to the Gas to be Detected 73JP8 AIRCRAFT FUEL P-7335 - 0.6 - 0.7 30 cm Above Ground

VESDA OSID New generation Beam Detector Revolutionizing very early warning smoke detection with VESDA, the company has reinvented smoke detection for outdoor areas with Outdoor Smoke Imaging Detection (OSID). OSID by Xtralis provides reliable, cost-effective smoke detection for open areas where fire detection presents unique challenges and very early warning is not always a priority. Solutions for all areas with complex high ceilings with the new generation Beam detector Using imaging technology based on the CMOS Imager, the OSID series offers fast setup and superior detection performance that cannot be achieved using a single photo receiver. A CMOS imager is equivalent to hundreds of thousands of photocells. Automatic setup reduces setup time from hours to minutes. CMOS imagers locate detection targets (Transmitter or Reflector) and lock onto it, eliminating building motion issues. The CMOS imager also allows to minimize drastically false alarms caused by foreign body ingress and sunlight saturation. In its simplest configuration, OSID-R (Reflector) uses a viewer and a reflector. It works according to the principle of dimming the light using infrared rays and performs intelligent analysis at the pixel level of its reflector, which offers superior performance. Power and connection occur only in the imager, and the OSID-R only requires a single standard reflector on the opposite wall (not a larger reflector the farther you go). ​ Alongside this stepping model is OSID-DE (Double-ended), which uses a similar CMOS sensor with wired or battery-operated transmitter(s) roughly aligned on the opposite wall within the protected area. The transmitter sends both infrared and ultraviolet coded light signals to the imager. The innovative use of dual light frequencies in an open path device allows OSID-DE to distinguish between real smoke and other solid objects. It offers high resistance to sudden and temporary clouds of dust and vapor, significantly reducing false alarms. The OSID range of outdoor smoke detectors offers a great package for reliable smoke detection in large or open areas. Using CMOS imaging technology, OSID not only provides reliable smoke detection, but is designed for fast setup and reliable operation throughout the detector's lifetime. Installers no longer face lengthy and costly setup processes and callbacks; and end users are no longer bothered by annoying or false alarms about building movement; dust or beam interruption. OSID offers a reliable alternative to heat or flame detectors, which typically start much later in the fire development cycle. Osid Beam Detector Product Options Headunits Xtralis OSI-10 Imager 7° Horizontal, 4° Vertical Shield, min. 30m, max 150m range, use only with standard power emitter, 8mA@1xemitter, 10mA@7xemitter ​ Xtralis OSI-90 Imager 80° Horizontal, 48° Vertical Protection, min. 6m, max 34m range (with standard powerful emitter), min. 12m, max 68m range (with high power emitter) ​ Reflectives Xtralis OSE-SP-01 Standard Power Emitter with Internal Battery Xtralis OSE-SPW Standard Power Emitter, 24V DC External Powered Xtralis OSE-HPW High Power Emitter, External Power Input, 800mA@24V DC Xtralis OSE-HP-01 High Power Emitter with Internal Battery

Jam Aqua Alarm Flood detection and alarm systems. JAM Aqualarm, which has been producing water leak detection and environmental monitoring systems since 1982, continues to establish new generation systems worldwide. With its long years of knowledge in water detection, JAM offers solutions suitable for projects specific risks. Platinum technology experts will guide you through all processes, from design to implementation, to provide customized solutions to your risks, from Industrial facilities to Plazas. Jam Aqua Alarm Su You Can Access Flood Detection and Alarm Solutions from the Links Below Jam CDBi-485 Flood Detector Jam UDP-24 Flood Detection Detector Jam UDIN-24 Infrared Flood Detection Detector Jam UDOF-24 Flood Channel Detection Detector Jam UDC-24 Flood Detection Detector Module

Addressable Type Cigarette Smoke Detection and Alarm System In order to monitor and prevent cigarette consumption in uncontrolled areas, cigarette smoke detection practices will protect people's health and workplace from risks, as well as increase work efficiency. Restrictions on smoking in workplaces create significant benefits for the business and employees. Providing a healthier and safer working opportunity in the workplace where there is no smoking tobacco smoke for the employees; For non-smokers, prevention of unintentional cigarette smoke damage, which is called passive smoking, enables smokers to get rid of addiction over time. For the workplace and employers, the increase in labor productivity, reduction of fire and safety risks, and absence of unpleasant cigarette smell in various areas within the enterprise will provide advantages. According to the researches, it has been determined that smokers have a higher risk of disease and more lost workforce than non-smokers. Moreover, the time spent by smokers to smoke also leads to a loss of production time and a decrease in workplace efficiency. Cigarette smoke detector applications to monitor and prevent smoking in uncontrolled areas of non-smoking in workplaces will not only protect people's health but also increase work efficiency. Addressed Type Cigarette-Tobacco Smoke Detection and Alarm Systems: In addressable tobacco smoke detection systems, there are loop lines to which the detection elements are connected. The number of loop lines and the wiring distance depends on the panel used. 125 -127 addressed elements (detector, button, input module, output module, addressed siren) can be connected to a loop line. Sensing elements in the loop can be divided into zones and each sensing element can be individually perceived by the panel thanks to the addressing software it contains. In other words, when any detector detects, the location of the detector can be determined individually on the panel or on the pc where the projects of the building, which can be used optionally, are loaded. Conventional systems and addressable systems are selected and sized according to their application locations. Conventional elements are sufficient for systems with a small number of sensing elements and offer economical solutions. Advantages of addressable cigarette smoke detection systems 1- In addressable cigarette smoke detection systems, clear information of the location of the detector can be reached. In conventional systems, region (floor) information comes. The net location of the detector must be checked for the region. 2- In addressed cigarette smoke detection systems, the alarm and error information of the detectors are displayed on the panel. 3- In addressable cigarette smoke detection systems, 127 - 125 equipment can be operated over each cable line, depending on the model. This number is limited to 20 detectors in conventional systems. 4- In addressed cigarette smoke detection systems, the system continues to work in the problem of the wiring line, providing information about where the problem is. In conventional systems, the part after the line is completely disabled. 5- In addressable cigarette smoke detection systems, equipment such as input module, output module, siren module, etc. can operate over the loop line. In conventional systems, general alarm and error information can be received from the panel. 6- In addressable cigarette smoke detection systems, wide range of alarm scenarios can be applied to be activated when tobacco smoke is detected. You can reach all our cigarette smoke detection and alarm solutions here.

Hanwha The name of the company, which is Samsung Techwin, was updated and became Hanwha Techwin. Platin Teknoloji Turkey is a project partner. Hanwha Techwin Europe offers robust and reliable video surveillance products designed to meet the current and future needs of security professionals. Our cameras, video recorders and other IP-based devices are manufactured to rigorous standards that reflect the precision engineering heritage that has been synonymous with the Hanwha brand. What sets Hanwha Techwin apart is a long list of innovative features that, when taken together in our products, offer our customers tangible benefits and exceptional value. Many of the technologies that underlie these features are unique to Hanwha Techwin. Hanwha Techwin Europe is one of the first manufacturers to realize the value of providing end users with the option to run software solutions such as video analytics from endpoints, such as from within the camera. One of the strengths of our Open Platform WiseNetIII DSP chipset, which underlies the latest generation of high resolution cameras, is that it gives our customers complete freedom to choose the perfect combination of software applications and VMS (video management software) that best suit their individual needs. Offering “Best in Class” products and solutions is only one part of the process of delivering a complete video surveillance solution; The strength of each of Hanwha Techwin products is enhanced by unrivaled pre- and post-sales support, many of which score highly in independent product tests. The heart of the range of support services, including system design, technical support and a full two-year warranty, lies in education. Hanwha Techwin Europe's security solutions are widely available in Europe through a wide network of distributors ABOUT HANWHA GROUP Founded in 1952, Hanwha Group is one of the top ten businesses in South Korea and is a "FORTUNE Global 500" company. Hanwha Group has 52 local subsidiaries and 146 global networks in three main sectors: manufacturing and construction, finance and services, and leisure. As an industry leader for over 60 years, Hanwha's manufacturing and construction businesses operate in a wide variety of areas, from basic chemicals and advanced materials to real estate development and total solar energy solutions. The finance network, covering banking, insurance, asset management and securities, is the largest non-bank financial group in South Korea. Its businesses in the services and leisure sector offer first-class lifestyle services in retail and leisure. Platin Technology experts, who are Hanwha Techwin closed circuit camera systems project partners, will offer special solutions to your institutions.

Nano Technology Automatic Panel Suppression Solutions A short-cut and definitive solution against electrical fires Extinguish the fire at the initial stage in the range of 50 V - 1000 V a in all your electrical panels, without distinction between large and small, with nano technology. Cable type products contain tens of thousands of Nano capsules that store the fire extinguishing agent and guarantee to stop the fire when it reaches the activation temperature. The polymeric shell of the micro-capsules keeps the fireproofing compound ready to work for years. When a fire occurs, the Nano-capsule shell explodes and each Nano capsule becomes a stand-alone "micro fire extinguisher". * Products of various shapes and sizes produced with Nano Technology can remain in "standby mode" for years. * Automatically detects the flame without allowing it to grow, and extinguishes it at the source as soon as it occurs. * It prevents the fire immediately from occurring. Various composite materials with innovative fire prevention ability How does it work ? The cable type is produced with Nano technology and is widely used around the world. Such materials contain microcapsules, inside which is the active ingredient with fire extinguishing properties. When the activation temperature is reached, the microcapsule shell bursts and discharges the liquid fire extinguishing agent inside as a gas. The O2 concentration in the environment decreases, the extinguishing gas concentration increases. With the cooling effect, heat is absorbed and fire is prevented. Where to use ? Weak current panels Main distribution boards Switchgear up to 1000 V Compensation boards Automation PLC panels Secondary boards Industrial panels In machinery in industrial facilities In short, in all areas where electricity is used How is it assembled? Nano technology cable type extinguisher will be sufficient to wrap it in a way that it covers the entire panel and fix it with a cable tie. They are ideal fire retardants for electrical fields. It does not require electronic sensor or similar systems. It does not need an electrical connection. It is maintenance free. It does not create visual pollution. It does not require any modification. It is easy to assemble. What is a nano capsule? Nano capsule is a technique widely used in many industries. Our product, which uses nanotechnology, is the first example in the world to apply the nano capsule technology in the field of fire extinguishing. There are thousands of Nano capsules that guarantee extinguishing when the activation temperature is reached. The nanocapsule shell bursts and discharges the liquid fire extinguishing agent inside as a gas. The O2 concentration in the environment decreases, the extinguishing gas concentration increases. With the cooling effect, heat is absorbed and fire is prevented. Keeps the environment where it is applied in suitable environments ready for uninterrupted fire for 5 years. How long are they? It is guaranteed for 5 years at -50, + 80 'C environment.

Smoke Test Tablet Smoke tablet offered as a solution for ventilation installation, chimney, sealing, odor test and smoke evacuation equipment testing that require artificial smoke in the environment. It has a structure that will provide the necessary intense smoke quickly. . With the intense smoke obtained, impermeability and device performance tests can be performed easily. . Smoke Tablet / Cartridge / Generator: It defines the test apparatus produced for chimney draft test, which emits smoke without creating flame and soot when burned. Smoke Tablets 45 second smoke tablet (Available in Stocks) 10 cartridges / box Smoke Color: white weight approx: 3 g / cartridge Size approx: 32 x Ø 14 mm Smoke Volume approx: 2,5 m³ Burning time approx: 45 sec. Compliant to BS 5440-1, Ds 675, Test Method ISO 5659-2. Use for testing: Smoke Alarms, Air Filters, Hoods, Air Balancing, Fans, Photography, Special Effects and much more. Not used in sensitive environments, contains large amounts of chloride 90 second smoke tablet (Special order) Allows to produce smoke in use 150 second smoke tablet (Special order) Allows to produce smoke in use 240 second smoke tablet (Special order) Allows to produce smoke in use 300 second smoke tablet (Special order) Allows to produce smoke in use Smoke Cartridges features Cartridges made of environmentally friendly plastic. Moisture-sealed smoke pellets. Reinforced base for minimal heat transfer. There are only smoke pellets made of high-content chemicals. It is guaranteed for 3 years from the date of delivery. Contains no zinc, rubber powder or mothballs. More than 250 security tests have been carried out. There is a warranty mark on the bottom. Comes in a consumer pack or large pack. Fume Tablet Usage Areas Energy Saving insulation test Ventilation Channel Test Draft Test Leak detection Security tests Negative Pressure Chambers Positive Pressure Rooms Fume Hoods Exhaust fans Stage and Screen Effects Photo Effects Air Balancing test Filtration Test Dust Removal Systems Fire and Smoke Alarm Test Poultry and Livestock Education Heat Exchangers Tanks and Piping Kitchen Hoods Electronic Air Filters Asbestos Reduction Radon Reduction Mechanical system risk management. Waste Treatment Systems

What is Smoke Tablet? Smoke tablet offered as a solution for ventilation installation, chimney, sealing, odor test and smoke evacuation equipment testing that require artificial smoke in the environment. It has a structure that will provide the necessary intense smoke quickly. . With the intense smoke obtained, impermeability and device performance tests can be performed easily. . Smoke Tablet / Cartridge / Generator: It defines the test apparatus produced for chimney draft test, which emits smoke without creating flame and soot when burned. Smoke Tablets 45 second smoke tablet (Available in Stocks) 10 cartridges / box Smoke Color: white weight approx: 3 g / cartridge Size approx: 32 x Ø 14 mm Smoke Volume approx: 2,5 m³ Burning time approx: 45 sec. Compliant to BS 5440-1, Ds 675, Test Method ISO 5659-2. Use for testing: Smoke Alarms, Air Filters, Hoods, Air Balancing, Fans, Photography, Special Effects and much more. Not used in sensitive environments, contains large amounts of chloride 90 second smoke tablet (Special order) Allows to produce smoke in use 150 second smoke tablet (Special order) Allows to produce smoke in use 240 second smoke tablet (Special order) Allows to produce smoke in use 300 second smoke tablet (Special order) Allows to produce smoke in use Smoke Cartridges features Cartridges made of environmentally friendly plastic. Moisture-sealed smoke pellets. Reinforced base for minimal heat transfer. There are only smoke pellets made of high-content chemicals. It is guaranteed for 3 years from the date of delivery. Contains no zinc, rubber powder or mothballs. More than 250 security tests have been carried out. There is a warranty mark on the bottom. Comes in a consumer pack or large pack. Fume Tablet Usage Areas Energy Saving insulation test Ventilation Channel Test Draft Test Leak detection Security tests Negative Pressure Chambers Positive Pressure Rooms Fume Hoods Exhaust fans Stage and Screen Effects Photo Effects Air Balancing test Filtration Test Dust Removal Systems Fire and Smoke Alarm Test Poultry and Livestock Education Heat Exchangers Tanks and Piping Kitchen Hoods Electronic Air Filters Asbestos Reduction Radon Reduction Mechanical system risk management. Waste Treatment Systems

Our Special Solutions for the Mining Sector We offer electronic solutions to the security risks that will occur in all processes from mining, transportation, storage to processing. FIRE DETECTION AND WARNING SYSTEM: Controlling all points of the mine against the risk of fire, such as closed open areas, mines, tunnels, etc., enables the detection of the first occurrence of the fire in the form of particles and to intervene in the fire before it grows. For this purpose, the fire alarm systems installed by Platin Teknoloji prevent the life-threatening of the personnel in the environment and material damage to the building. The system includes a fire control panel. It evaluates the warnings coming from various type detection elements suitable for the needs of your business and activates the sirens, flashers, telephone dialer. It delivers detailed information to the call center and security point. While all these events are happening, from the moment the fire is detected, it is ensured that the previously prepared alarm scenarios are activated by sending information to the elevator, ventilation system, pressurization fans, smoke evacuation system, turnstiles, etc. CLOSED CIRCUIT CAMERA SYSTEMS: Camera systems used to minimize the security and operational risks specific to your needs of mining facilities produce indispensable solutions for operational safety. We offer i camera solutions and DVR, NVR recorder and command control center solutions suitable for all business and manufacturing conditions. Our products do not only register. It produces alarm scenario solutions in order to prevent the occurrence of events, problems and risks by performing event analysis. DETECTION OF FLAMMABLE, EXPLOSIVE AND TOXIC CHEMICALS AND GASES: Gases used in various processes in mines and operating facilities, chemicals, gases generated during manufacturing, or concentrations of gases emitted in storage areas pose a risk in terms of worker health and workplace safety. causes damage. Platinum technology engineers offer customized solutions for your business to identify these risks caused by industrial gases and to evacuate them before the risk grows. FIRE DETECTION WITH VERY SENSITIVE AIR SAMPLING AND ANALYSIS SYSTEMS: The system ensures that the sensitive laser sensor, which continuously samples air from the environment, follows the quality of the air passing through the sampling room and ensures that the fire is detected at the moment of its occurrence. LASER TYPE FIRE DETECTION AND SMOKE DETECTION EQUIPMENTS: At points where high ceiling point type fire detection systems do not work efficiently, laser beam detectors are used to minimize operational and installation costs, economic and fire risks. The system ensures that the fire is detected at the time of its first occurrence by mutually controlling the beam of light it generates. ELECTRIC PANELS AUTOMATIC FIRE EXTINGUISHING: Cabin-type extinguishing systems that provide low initial investment and operating costs and high performance are used for electrical panels and cabinets where risks are concentrated. It provides effective extinguishing with HFC227ea and HFC125 etc. extinguishing gases used in fire extinguishers. They are odorless, colorless, non-residual gases that do not harm electrical material. WATER MOISTURE DETECTION AND ALARM SYSTEMS: These are the solutions to prevent damage to the facility as a result of leakage and humidity that will occur outside the control of the water used in mining areas, Detection of possible floods, Warnings of the relevant parties and the water discharge engine, heating system, ventilation system in accordance with the scenario prepared. AUTOMATIC FIRE EXTINGUISHING SYSTEMS: Process-specific risks that will cause significant damage to the enterprise and solutions that will extinguish electrical fires in a very short time are offered, Automatic extinguishing systems that will prevent damage to the business and manufacturing processes. The relevant extinguishing gas / chemical is selected and designed, taking into account the special situation of the establishment and the area where it will be established. The system user will make independent fire detection and initiate the extinguishing process. CONVEYOR TUNNEL MINE FURNACE PANELS, VENTILATION SYSTEMS FIRE DETECTION AND DETECTION SYSTEMS: With the special sensor cable to be installed in high risk and difficult to detect areas such as conveyor, electrical installations and ventilation ducts, sudden temperature changes are detected at the points where it is located, and fire is detected before it occurs. Linear Heat Detection is a versatile and economical fire detection product. Considering the initial investment, maintenance, operating costs and operating performance, .Extrem offers economical and performance solutions for fire detection needs. ACCESS CONTROL SYSTEMS: We offer solutions for the employees to act in a controlled and safe manner within the enterprise and to control and report the entrance to the designated areas. The doors of risky rooms are controlled with the access control system due to the determined business, safety, hygiene and occupational safety needs. We offer solutions such as personnel card, fingerprint, eye recognition, etc. at the entrances to these rooms. Access control application covers all determined areas starting from the first entry point of the enterprise. It is possible to report all movements and to make the necessary controls online. TURNSTILE AND BARRIER SOLUTIONS: Operation and process entrances are arranged and limited with turnstiles used in integration with the access control system in all areas where the human traffic in the enterprise must be controlled. Thus, it is used for the purpose of controlling the passages at the points and places where the transition should be made within the order determined by the factory. All of our turnstiles are microprocessor-based and allow only one person to pass at a time. Turnstiles have automatic falling arm feature and illuminated and audible indicators. INTELLIGENT CAMERA SOFTWARE: It is not possible to interpret and monitor the environmental security, occupational safety, etc. needs specific to mining enterprises with existing cameras and observations of the operators. Due to all these needs, image - event analysis software has been developed to interpret the images taken from Platin Technology cameras and enable the operation of previously determined factory-specific scenarios. In the Image - Event Analysis software algorithms, images are viewed simultaneously and live, and the software also interprets events and runs scenarios. The software works 24/7 365 days in all environmental conditions. It does not require manpower and equipment. Early fire detection can be achieved with new generation smart thermal cameras. SYSTEM ROOM MONITORING AND REPORTING SOLUTIONS: It has been developed for important technical rooms to operate without risk. It monitors the criteria such as heat, humidity, fire, smoke, network-ups voltages, unauthorized entry etc. of special rooms such as system rooms and ensures that the relevant persons are warned and reported without a possible detection. In addition to the ability to monitor system parameters, it provides integration with other systems in case of an event. In cases of sudden temperature increases and decreases, ups and network voltages, water and humidity raids, unauthorized entry, etc., the system room provides a warning in the form of e-mail or SMS. In this way, the alarm & technical malfunction that caused the error is detected as soon as possible and effective and fast measures are taken. FIRE DETECTION AND ALARM SYSTEM TEST EQUIPMENTS: Testing and regular maintenance of fire detection system equipment established by making serious investments in enterprises are among the overlooked needs in our country. Platin Technology has offered suitable test gases, cleaning and control apparatus for all detector types such as smoke, heat, gas and carbon monoxide, which make up the fire detection system, to the use of professional operating and fire system maintenance companies. EMERGENCY ROUTING LUMINAIRES: In the event of a power outage in the industrial facilities, such as the city network or similar power failure, for safety reasons such as fire, earthquake, interruption of the electrical energy of the building or structure for safety reasons, for automatic activation and evacuation in case of failure of normal lighting due to the opening of a circuit breaker or fuse are devices and systems that direct users. EMERGENCY ANNOUNCEMENT AND SOUNDING SYSTEM: Emergency announcement and sounding systems in industrial facilities are the solutions used for the rapid evacuation and guidance of the employees in the buildings in emergency situations and safely. KEY MANAGEMENT SYSTEMS: It is ensured that keys of all areas and vehicles belonging to the enterprise can be easily accessed when necessary, and key management solutions are prevented and securely protected with key management solutions that ensure the reporting of key usages. SECURITY AUTOMATION SOLUTIONS: It installs security automation systems against theft and sabotage in medium and small type projects. These systems, which are needed today, are the definitive solution to robberies and unauthorized access. The possibility of false alarms of these systems is very low and they provide the opportunity to intervene in the system only with the correct password. There are products and systems with different detection features in security systems according to the purpose and protection system. Electronic systems are integrated with alarms, where the necessary precautionary warnings are activated instantly and the security risks of large-scale areas such as Shopping Center, Plaza, Headquarters, Factory, Campus are minimized. It offers solutions to minimize risks in all areas of the mining industry. Please contact us for special solutions for your projects in Turkey and all countries in our service area.

Elderly Support, Home Care Automation System Home Care; Effective care and safety automation for Elderly, Sick and Handicapped individuals living alone or in need of care at home. Automation solutions for public institutions and municipalities that provide disabled and elderly support services: Elderly and disabled individuals living alone in their homes; Monitoring health conditions in digital environment Informing the relevant health authority when necessary Ensuring the safety of elderly people Meeting the personal needs of elderly people Supporting elderly people to live in their homes We offer electronic solutions to increase the quality of life and ensure their social integration. What is Followed in Home Care Service. Health Risks Pulse Temperature Fall Don't leave the house Asking for help with a panic button Security Risks Fire, smoke, Gas detection Anti-theft alarm Water and flood alarm Social help Follow-up of social service needs such as cleaning, food, etc. How does it work Disabled, Sick, Elderly person communicates with the center by pressing the button whenever deemed necessary with the portable wristband or necklace type and the panic button. The conversation starts with the call center operator as soon as the button is pressed, and bidirectional communication is provided in this way. It can be provided in conversation with the hands-free microphone and speaker on the panel. Panic button also measures body temperature, (Optional Pulse, oximeter and fall sensor) alarm scenarios continue to function just like when the panic button is pressed, in case of exceeding the specified level; At the same time, this information reaches the call center in parallel, and the process is followed, confirmed and reported simultaneously; Application user can be backed up in parallel. The system is open to developments. It can add suitable new generation medical devices. TECHNICAL SPECIFICATIONS 7/24 Professional monitoring and control Two-way voice conversation via GSM connected panel Panel touch and voice guided Functional emergency buttons on it Panel communicates centrally with TCP / IP over 3G or GPRS 869 MHZ wireless communication with panel equipment Parallel alarm center connection Meeting with the center in case of emergency by means of a button Informing the center automatically in case of violation, detection and alarm Periodic communication test signal Waterproof and long battery life pan button Measuring body temperature via panic button Alarm sending over 38 ' Tracking via mobile application Drug programming via mobile application Tamper, low battery, communication error notification Backup battery against power outages Suitable for wall mounting or desktop use Warning against dismantling and sabotage EN 50131 Grade 2 compliant Wireless security equipment support OPTIONAL FEATURES Drop sensor Heart rate sensor Oxidation sensor It is the system features known as the emergency call panic button for the elderly in the society. FOR OUR OTHER ELECTRONIC ACCESSIBILITY SOLUTIONS